S262 Vierschneidiger Vollhartmetallfräser mit Eckenradius

Name: S262 Vierschneidiger Vollhartmetallfräser mit Eckenradius (3.0XR0.3)
SKU: S2623.0XR0.3
Price: 32.42 EUR
Availability: InStock

DORMER Malaysien

32,42 €

excl. MwSt.

Produktinformationen

Das 4-Schneiden-Design mit kurzer Schneidenlänge und unterschiedlichem Eckenradius bietet eine hohe Steifigkeit für das Standardprofilfräsen, wenn ein Eckenradius erforderlich ist. Die AlCrN-Beschichtung verbessert die Leistung beim Fräsen schwer zu bearbeitender Materialien. Die 40 ° -Spiralnut mit Ungleichteilung reduziert Vibrationen und maximiert die Produktivität.

Beschichtung (DP)
Schaft (DP)
Toleranz (DP)
Ausführung (DP)

{"v":1,"a":["https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S262_DIM.png"],"p":{"474902":{"c":"S2623.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 3 mm with 9 mm length of cut, 50 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 3 mm with 9 mm length of cut, 50 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 3 mm mit 9 mm Schnittlänge, 50 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706924"],[7,"1"],[14,"S262"],[16,"S2623.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684733"],[21,"15.0"],[22,"115.0"],[23,"14.0"],[24,"22.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.3"],[164,"3.0"],[181,"9.0"],[252,"3.0"],[254,"15.0"],[260,"50.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976566]},"474903":{"c":"S2623.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 3 mm with 9 mm length of cut, 50 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 3 mm with 9 mm length of cut, 50 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 3 mm mit 9 mm Schnittlänge, 50 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706925"],[7,"1"],[14,"S262"],[16,"S2623.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684740"],[21,"15.0"],[22,"115.0"],[23,"14.0"],[24,"20.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.5"],[164,"3.0"],[181,"9.0"],[252,"3.0"],[254,"15.0"],[260,"50.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976567]},"474904":{"c":"S2624.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 4 mm with 12 mm length of cut, 57 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 4 mm with 12 mm length of cut, 57 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 4 mm mit 12 mm Schnittlänge, 57 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706926"],[7,"1"],[14,"S262"],[16,"S2624.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684757"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"18.7"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.3"],[164,"4.0"],[181,"12.0"],[252,"4.0"],[254,"20.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976568]},"474905":{"c":"S2624.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 4 mm with 12 mm length of cut, 57 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 4 mm with 12 mm length of cut, 57 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 4 mm mit 12 mm Schnittlänge, 57 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706927"],[7,"1"],[14,"S262"],[16,"S2624.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684764"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"24.7"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.5"],[164,"4.0"],[181,"12.0"],[252,"4.0"],[254,"20.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976569]},"474906":{"c":"S2624.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 4 mm with 12 mm length of cut, 57 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 4 mm with 12 mm length of cut, 57 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 4 mm mit 12 mm Schnittlänge, 57 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706928"],[7,"1"],[14,"S262"],[16,"S2624.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684771"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"25.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"1.0"],[164,"4.0"],[181,"12.0"],[252,"3.0"],[254,"20.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976570]},"474907":{"c":"S2625.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 5 mm with 15 mm length of cut, 57 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 5 mm with 15 mm length of cut, 57 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 5 mm mit 15 mm Schnittlänge, 57 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706929"],[7,"1"],[14,"S262"],[16,"S2625.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684788"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"19.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.3"],[164,"5.0"],[181,"15.0"],[252,"0.0"],[254,"20.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976571]},"474908":{"c":"S2625.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 5 mm with 15 mm length of cut, 57 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 5 mm with 15 mm length of cut, 57 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 5 mm mit 15 mm Schnittlänge, 57 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706930"],[7,"1"],[14,"S262"],[16,"S2625.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684795"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"19.1"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.5"],[164,"5.0"],[181,"15.0"],[252,"5.0"],[254,"20.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976572]},"474909":{"c":"S2626.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 6 mm with 16 mm length of cut, 57 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 6 mm with 16 mm length of cut, 57 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 6 mm mit 16 mm Schnittlänge, 57 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706931"],[7,"1"],[14,"S262"],[16,"S2626.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684801"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"26.4"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.3"],[164,"6.0"],[181,"16.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976573]},"474910":{"c":"S2626.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 6 mm with 16 mm length of cut, 57 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 6 mm with 16 mm length of cut, 57 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 6 mm mit 16 mm Schnittlänge, 57 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706932"],[7,"1"],[14,"S262"],[16,"S2626.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684818"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"26.3"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.5"],[164,"6.0"],[181,"16.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976574]},"474911":{"c":"S2626.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 6 mm with 16 mm length of cut, 57 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 6 mm with 16 mm length of cut, 57 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 6 mm mit 16 mm Schnittlänge, 57 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706933"],[7,"1"],[14,"S262"],[16,"S2626.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684825"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"26.3"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"1.0"],[164,"6.0"],[181,"16.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976575]},"474912":{"c":"S2628.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 8 mm mit 20 mm Schnittlänge, 64 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 8 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706934"],[7,"1"],[14,"S262"],[16,"S2628.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684832"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"46.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"8.0"],[142,"h6"],[158,"0.3"],[164,"8.0"],[181,"20.0"],[260,"64.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976576]},"474913":{"c":"S2628.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 8 mm mit 20 mm Schnittlänge, 64 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 8 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706935"],[7,"1"],[14,"S262"],[16,"S2628.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684849"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"45.6"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"8.0"],[142,"h6"],[158,"0.5"],[164,"8.0"],[181,"20.0"],[260,"64.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976577]},"474914":{"c":"S2628.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 8 mm mit 20 mm Schnittlänge, 64 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 8 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706936"],[7,"1"],[14,"S262"],[16,"S2628.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684856"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"45.4"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"8.0"],[142,"h6"],[158,"1.0"],[164,"8.0"],[181,"20.0"],[260,"64.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976578]},"474915":{"c":"S2628.0XR1.5","s":["Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 1.5 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 1.5 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 8 mm mit 20 mm Schnittlänge, 64 mm Gesamtlänge und 1.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 8 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706937"],[7,"1"],[14,"S262"],[16,"S2628.0XR1.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684863"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"45.5"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"8.0"],[142,"h6"],[158,"1.5"],[164,"8.0"],[181,"20.0"],[260,"64.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976579]},"474916":{"c":"S2628.0XR2.0","s":["Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 8 mm mit 20 mm Schnittlänge, 64 mm Gesamtlänge und 2 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 8 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706938"],[7,"1"],[14,"S262"],[16,"S2628.0XR2.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684870"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"45.5"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"8.0"],[142,"h6"],[158,"2.0"],[164,"8.0"],[181,"20.0"],[260,"64.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976580]},"474917":{"c":"S26210.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 10 mm mit 22 mm Schnittlänge, 72 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 10 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706939"],[7,"1"],[14,"S262"],[16,"S26210.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684887"],[21,"17.0"],[22,"85.0"],[23,"17.0"],[24,"75.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[158,"0.3"],[164,"10.0"],[181,"22.0"],[260,"72.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976581]},"474918":{"c":"S26210.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 10 mm mit 22 mm Schnittlänge, 72 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 10 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706940"],[7,"1"],[14,"S262"],[16,"S26210.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684894"],[21,"17.0"],[22,"85.0"],[23,"17.0"],[24,"74.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[158,"0.5"],[164,"10.0"],[181,"22.0"],[260,"72.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976582]},"474919":{"c":"S26210.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 10 mm mit 22 mm Schnittlänge, 72 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 10 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706941"],[7,"1"],[14,"S262"],[16,"S26210.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684900"],[21,"16.0"],[22,"85.0"],[23,"17.0"],[24,"69.7"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[158,"1.0"],[164,"10.0"],[181,"22.0"],[260,"72.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976583]},"474920":{"c":"S26210.0XR1.5","s":["Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 1.5 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 1.5 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 10 mm mit 22 mm Schnittlänge, 72 mm Gesamtlänge und 1.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 10 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706942"],[7,"1"],[14,"S262"],[16,"S26210.0XR1.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684917"],[21,"17.0"],[22,"85.0"],[23,"17.0"],[24,"74.5"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[158,"1.5"],[164,"10.0"],[181,"22.0"],[260,"72.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976584]},"474921":{"c":"S26210.0XR2.0","s":["Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 10 mm mit 22 mm Schnittlänge, 72 mm Gesamtlänge und 2 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 10 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706943"],[7,"1"],[14,"S262"],[16,"S26210.0XR2.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684924"],[21,"17.0"],[22,"85.0"],[23,"17.0"],[24,"74.5"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[158,"2.0"],[164,"10.0"],[181,"22.0"],[260,"72.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976585]},"474922":{"c":"S26212.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 12 mm mit 26 mm Schnittlänge, 83 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 12 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706944"],[7,"1"],[14,"S262"],[16,"S26212.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684931"],[21,"17.0"],[22,"93.0"],[23,"17.0"],[24,"114.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[158,"0.3"],[164,"12.0"],[181,"26.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976586]},"474923":{"c":"S26212.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 12 mm mit 26 mm Schnittlänge, 83 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 12 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706945"],[7,"1"],[14,"S262"],[16,"S26212.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684948"],[21,"17.0"],[22,"88.0"],[23,"17.0"],[24,"121.6"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[158,"0.5"],[164,"12.0"],[181,"26.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976587]},"474924":{"c":"S26212.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 12 mm mit 26 mm Schnittlänge, 83 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 12 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706946"],[7,"1"],[14,"S262"],[16,"S26212.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684955"],[21,"17.0"],[22,"89.0"],[23,"17.0"],[24,"120.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[158,"1.0"],[164,"12.0"],[181,"26.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976588]},"474925":{"c":"S26212.0XR2.0","s":["Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 12 mm mit 26 mm Schnittlänge, 83 mm Gesamtlänge und 2 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 12 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706947"],[7,"1"],[14,"S262"],[16,"S26212.0XR2.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684962"],[21,"17.0"],[22,"85.0"],[23,"17.0"],[24,"119.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[158,"2.0"],[164,"12.0"],[181,"26.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976589]},"474926":{"c":"S26212.0XR2.5","s":["Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 2.5 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 2.5 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 12 mm mit 26 mm Schnittlänge, 83 mm Gesamtlänge und 2.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 12 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706948"],[7,"1"],[14,"S262"],[16,"S26212.0XR2.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684979"],[21,"17.0"],[22,"85.0"],[23,"17.0"],[24,"120.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[158,"2.5"],[164,"12.0"],[181,"26.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976590]},"474927":{"c":"S26212.0XR3.0","s":["Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 12 mm mit 26 mm Schnittlänge, 83 mm Gesamtlänge und 3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 12 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706949"],[7,"1"],[14,"S262"],[16,"S26212.0XR3.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684986"],[21,"17.0"],[22,"88.0"],[23,"17.0"],[24,"120.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[158,"3.0"],[164,"12.0"],[181,"26.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976591]},"474928":{"c":"S26214.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 14 mm mit 32 mm Schnittlänge, 83 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 14 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706950"],[7,"1"],[14,"S262"],[16,"S26214.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684993"],[21,"21.0"],[22,"88.0"],[23,"21.0"],[24,"157.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"14.0"],[142,"h6"],[158,"0.3"],[164,"14.0"],[181,"32.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976592]},"474929":{"c":"S26214.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 14 mm mit 32 mm Schnittlänge, 83 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 14 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706951"],[7,"1"],[14,"S262"],[16,"S26214.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685006"],[21,"21.0"],[22,"88.0"],[23,"21.0"],[24,"156.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"14.0"],[142,"h6"],[158,"0.5"],[164,"14.0"],[181,"32.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976593]},"474930":{"c":"S26214.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 14 mm mit 32 mm Schnittlänge, 83 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 14 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706952"],[7,"1"],[14,"S262"],[16,"S26214.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685013"],[21,"21.0"],[22,"88.0"],[23,"21.0"],[24,"158.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"14.0"],[142,"h6"],[158,"1.0"],[164,"14.0"],[181,"32.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976594]},"474931":{"c":"S26214.0XR2.0","s":["Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 14 mm mit 32 mm Schnittlänge, 83 mm Gesamtlänge und 2 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 14 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706953"],[7,"1"],[14,"S262"],[16,"S26214.0XR2.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685020"],[21,"21.0"],[22,"90.0"],[23,"21.0"],[24,"157.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"14.0"],[142,"h6"],[158,"2.0"],[164,"14.0"],[181,"32.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976595]},"474932":{"c":"S26214.0XR3.0","s":["Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 14 mm mit 32 mm Schnittlänge, 83 mm Gesamtlänge und 3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 14 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706954"],[7,"1"],[14,"S262"],[16,"S26214.0XR3.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685037"],[21,"21.0"],[22,"90.0"],[23,"21.0"],[24,"157.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"14.0"],[142,"h6"],[158,"3.0"],[164,"14.0"],[181,"32.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976596]},"474933":{"c":"S26216.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 16 mm mit 32 mm Schnittlänge, 92 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 16 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706955"],[7,"1"],[14,"S262"],[16,"S26216.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685044"],[21,"21.0"],[22,"98.0"],[23,"21.0"],[24,"230.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[158,"0.3"],[164,"16.0"],[181,"32.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976597]},"474934":{"c":"S26216.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 16 mm mit 32 mm Schnittlänge, 92 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 16 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706956"],[7,"1"],[14,"S262"],[16,"S26216.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685051"],[21,"21.0"],[22,"98.0"],[23,"21.0"],[24,"227.5"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[158,"0.5"],[164,"16.0"],[181,"32.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976598]},"474935":{"c":"S26216.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 16 mm mit 32 mm Schnittlänge, 92 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 16 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706957"],[7,"1"],[14,"S262"],[16,"S26216.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685068"],[21,"21.0"],[22,"98.0"],[23,"21.0"],[24,"229.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[158,"1.0"],[164,"16.0"],[181,"32.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976599]},"474936":{"c":"S26216.0XR2.0","s":["Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 16 mm mit 32 mm Schnittlänge, 92 mm Gesamtlänge und 2 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 16 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706958"],[7,"1"],[14,"S262"],[16,"S26216.0XR2.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685075"],[21,"21.0"],[22,"98.0"],[23,"21.0"],[24,"229.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[158,"2.0"],[164,"16.0"],[181,"32.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976600]},"474937":{"c":"S26216.0XR2.5","s":["Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 2.5 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 2.5 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 16 mm mit 32 mm Schnittlänge, 92 mm Gesamtlänge und 2.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 16 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706959"],[7,"1"],[14,"S262"],[16,"S26216.0XR2.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685082"],[21,"21.0"],[22,"98.0"],[23,"21.0"],[24,"230.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[158,"2.5"],[164,"16.0"],[181,"32.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976601]},"474938":{"c":"S26216.0XR3.0","s":["Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 16 mm mit 32 mm Schnittlänge, 92 mm Gesamtlänge und 3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 16 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706960"],[7,"1"],[14,"S262"],[16,"S26216.0XR3.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685099"],[21,"21.0"],[22,"98.0"],[23,"21.0"],[24,"230.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[158,"3.0"],[164,"16.0"],[181,"32.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976602]},"474939":{"c":"S26216.0XR4.0","s":["Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 4 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 4 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 16 mm mit 32 mm Schnittlänge, 92 mm Gesamtlänge und 4 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 16 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706961"],[7,"1"],[14,"S262"],[16,"S26216.0XR4.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685105"],[21,"21.0"],[22,"95.0"],[23,"21.0"],[24,"230.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[158,"4.0"],[164,"16.0"],[181,"32.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976603]},"474940":{"c":"S26218.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 18 mm mit 38 mm Schnittlänge, 92 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 18 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706962"],[7,"1"],[14,"S262"],[16,"S26218.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685112"],[21,"30.0"],[22,"98.0"],[23,"30.0"],[24,"282.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"18.0"],[142,"h6"],[158,"0.3"],[164,"18.0"],[181,"38.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976604]},"474941":{"c":"S26218.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 18 mm mit 38 mm Schnittlänge, 92 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 18 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706963"],[7,"1"],[14,"S262"],[16,"S26218.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685129"],[21,"30.0"],[22,"98.0"],[23,"30.0"],[24,"281.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"18.0"],[142,"h6"],[158,"0.5"],[164,"18.0"],[181,"38.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976605]},"474942":{"c":"S26218.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 18 mm mit 38 mm Schnittlänge, 92 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 18 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706964"],[7,"1"],[14,"S262"],[16,"S26218.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685136"],[21,"30.0"],[22,"98.0"],[23,"30.0"],[24,"282.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"18.0"],[142,"h6"],[158,"1.0"],[164,"18.0"],[181,"38.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976606]},"474943":{"c":"S26218.0XR2.0","s":["Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 18 mm mit 38 mm Schnittlänge, 92 mm Gesamtlänge und 2 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 18 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706965"],[7,"1"],[14,"S262"],[16,"S26218.0XR2.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685143"],[21,"30.0"],[22,"108.0"],[23,"30.0"],[24,"282.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"18.0"],[142,"h6"],[158,"2.0"],[164,"18.0"],[181,"38.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976607]},"474944":{"c":"S26218.0XR3.0","s":["Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 18 mm mit 38 mm Schnittlänge, 92 mm Gesamtlänge und 3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 18 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706966"],[7,"1"],[14,"S262"],[16,"S26218.0XR3.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685150"],[21,"30.0"],[22,"98.0"],[23,"30.0"],[24,"282.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"18.0"],[142,"h6"],[158,"3.0"],[164,"18.0"],[181,"38.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976608]},"474945":{"c":"S26220.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 20 mm mit 38 mm Schnittlänge, 104 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 20 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706967"],[7,"1"],[14,"S262"],[16,"S26220.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685167"],[21,"30.0"],[22,"110.0"],[23,"30.0"],[24,"398.9"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[158,"0.3"],[164,"20.0"],[181,"38.0"],[260,"104.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976609]},"474946":{"c":"S26220.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 20 mm mit 38 mm Schnittlänge, 104 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 20 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706968"],[7,"1"],[14,"S262"],[16,"S26220.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685174"],[21,"30.0"],[22,"110.0"],[23,"30.0"],[24,"400.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[158,"0.5"],[164,"20.0"],[181,"38.0"],[260,"104.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976610]},"474947":{"c":"S26220.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 20 mm mit 38 mm Schnittlänge, 104 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 20 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706969"],[7,"1"],[14,"S262"],[16,"S26220.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685181"],[21,"30.0"],[22,"110.0"],[23,"30.0"],[24,"397.5"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[158,"1.0"],[164,"20.0"],[181,"38.0"],[260,"104.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976611]},"474948":{"c":"S26220.0XR2.0","s":["Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 20 mm mit 38 mm Schnittlänge, 104 mm Gesamtlänge und 2 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 20 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706970"],[7,"1"],[14,"S262"],[16,"S26220.0XR2.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685198"],[21,"30.0"],[22,"110.0"],[23,"30.0"],[24,"397.3"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[158,"2.0"],[164,"20.0"],[181,"38.0"],[260,"104.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976612]},"474949":{"c":"S26220.0XR2.5","s":["Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 2.5 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 2.5 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 20 mm mit 38 mm Schnittlänge, 104 mm Gesamtlänge und 2.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 20 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706971"],[7,"1"],[14,"S262"],[16,"S26220.0XR2.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685204"],[21,"30.0"],[22,"110.0"],[23,"30.0"],[24,"400.6"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[158,"2.5"],[164,"20.0"],[181,"38.0"],[260,"104.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976613]},"474950":{"c":"S26220.0XR3.0","s":["Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 20 mm mit 38 mm Schnittlänge, 104 mm Gesamtlänge und 3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 20 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706972"],[7,"1"],[14,"S262"],[16,"S26220.0XR3.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685211"],[21,"30.0"],[22,"112.0"],[23,"30.0"],[24,"401.1"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[158,"3.0"],[164,"20.0"],[181,"38.0"],[260,"104.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976614]},"474951":{"c":"S26220.0XR4.0","s":["Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 4 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 4 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 20 mm mit 38 mm Schnittlänge, 104 mm Gesamtlänge und 4 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 20 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706973"],[7,"1"],[14,"S262"],[16,"S26220.0XR4.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685228"],[21,"30.0"],[22,"110.0"],[23,"30.0"],[24,"400.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[158,"4.0"],[164,"20.0"],[181,"38.0"],[260,"104.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976615]}}}

In den Warenkorb

Auf die Wunschliste

Allgemeine B2B-Verkaufsbedingungen
B2B-Rückgaberichtlinie

Spezifikationen

Ausführung (DP)	3.0XR0.3, 3.0XR0.5, 4.0XR0.3, 4.0XR0.5, 4.0XR1.0, 5.0XR0.3, 5.0XR0.5, 6.0XR0.3, 6.0XR0.5, 6.0XR1.0, 8.0XR0.3, 8.0XR0.5, 8.0XR1.0, 8.0XR1.5, 8.0XR2.0, 10.0XR0.3, 10.0XR0.5, 10.0XR1.0, 10.0XR1.5, 10.0XR2.0, 12.0XR0.3, 12.0XR0.5, 12.0XR1.0, 12.0XR2.0, 12.0XR2.5, 12.0XR3.0, 14.0XR0.3, 14.0XR0.5, 14.0XR1.0, 14.0XR2.0, 14.0XR3.0, 16.0XR0.3, 16.0XR0.5, 16.0XR1.0, 16.0XR2.0, 16.0XR2.5, 16.0XR3.0, 16.0XR4.0, 18.0XR0.3, 18.0XR0.5, 18.0XR1.0, 18.0XR2.0, 18.0XR3.0, 20.0XR0.3, 20.0XR0.5, 20.0XR1.0, 20.0XR2.0, 20.0XR2.5, 20.0XR3.0, 20.0XR4.0
Beschichtung (DP)	Aluminium-Chromnitrid-Beschichtung
Schaft (DP)	DIN 6535 HA Zylindrischer Schaft
Toleranz (DP)	h9

Alternative Produkte

Diese anderen Produkten könnten Sie interessieren

S262 Vierschneidiger Vollhartmetallfräser mit Eckenradius

Produktinformationen

Beschichtung (DP)

Schaft (DP)

Toleranz (DP)

Ausführung (DP)

Spezifikationen

Alternative Produkte