S262 Fraise torique en carbure monobloc à 4 dents

Name: S262 Fraise torique en carbure monobloc à 4 dents (3.0XR0.3)
SKU: S2623.0XR0.3
Price: 32.42 EUR
Availability: InStock

DORMER Malaisie

32,42 €

excl. TVA

Informations produit

Fraise à 4 dents avec une longueur de coupe courte et différents rayons en bout disponibles offrant une grande rigidité pour le fraisage de profil standard lorsqu'un rayon d'angle est requis. Le revêtement AlCrN améliore les performances lors du fraisage de matériaux difficiles à usiner. L'hélice à 40° avec un pas différentiel réduit les vibrations et maximise la productivité.

Revêtement (DP)
Queue (DP)
Tolérance (DP)
Variante (DP)

{"v":1,"a":["https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S262_DIM.png"],"p":{"474902":{"c":"S2623.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 3 mm with 9 mm length of cut, 50 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 3 mm with 9 mm length of cut, 50 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 3 mm mit 9 mm Schnittlänge, 50 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706924"],[7,"1"],[14,"S262"],[16,"S2623.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684733"],[21,"15.0"],[22,"115.0"],[23,"14.0"],[24,"22.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.3"],[164,"3.0"],[181,"9.0"],[252,"3.0"],[254,"15.0"],[260,"50.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976566]},"474903":{"c":"S2623.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 3 mm with 9 mm length of cut, 50 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 3 mm with 9 mm length of cut, 50 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 3 mm mit 9 mm Schnittlänge, 50 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706925"],[7,"1"],[14,"S262"],[16,"S2623.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684740"],[21,"15.0"],[22,"115.0"],[23,"14.0"],[24,"20.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.5"],[164,"3.0"],[181,"9.0"],[252,"3.0"],[254,"15.0"],[260,"50.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976567]},"474904":{"c":"S2624.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 4 mm with 12 mm length of cut, 57 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 4 mm with 12 mm length of cut, 57 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 4 mm mit 12 mm Schnittlänge, 57 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706926"],[7,"1"],[14,"S262"],[16,"S2624.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684757"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"18.7"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.3"],[164,"4.0"],[181,"12.0"],[252,"4.0"],[254,"20.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976568]},"474905":{"c":"S2624.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 4 mm with 12 mm length of cut, 57 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 4 mm with 12 mm length of cut, 57 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 4 mm mit 12 mm Schnittlänge, 57 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706927"],[7,"1"],[14,"S262"],[16,"S2624.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684764"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"24.7"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.5"],[164,"4.0"],[181,"12.0"],[252,"4.0"],[254,"20.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976569]},"474906":{"c":"S2624.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 4 mm with 12 mm length of cut, 57 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 4 mm with 12 mm length of cut, 57 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 4 mm mit 12 mm Schnittlänge, 57 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706928"],[7,"1"],[14,"S262"],[16,"S2624.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684771"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"25.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"1.0"],[164,"4.0"],[181,"12.0"],[252,"3.0"],[254,"20.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976570]},"474907":{"c":"S2625.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 5 mm with 15 mm length of cut, 57 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 5 mm with 15 mm length of cut, 57 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 5 mm mit 15 mm Schnittlänge, 57 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706929"],[7,"1"],[14,"S262"],[16,"S2625.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684788"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"19.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.3"],[164,"5.0"],[181,"15.0"],[252,"0.0"],[254,"20.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976571]},"474908":{"c":"S2625.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 5 mm with 15 mm length of cut, 57 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 5 mm with 15 mm length of cut, 57 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 5 mm mit 15 mm Schnittlänge, 57 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706930"],[7,"1"],[14,"S262"],[16,"S2625.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684795"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"19.1"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.5"],[164,"5.0"],[181,"15.0"],[252,"5.0"],[254,"20.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976572]},"474909":{"c":"S2626.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 6 mm with 16 mm length of cut, 57 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 6 mm with 16 mm length of cut, 57 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 6 mm mit 16 mm Schnittlänge, 57 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706931"],[7,"1"],[14,"S262"],[16,"S2626.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684801"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"26.4"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.3"],[164,"6.0"],[181,"16.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976573]},"474910":{"c":"S2626.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 6 mm with 16 mm length of cut, 57 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 6 mm with 16 mm length of cut, 57 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 6 mm mit 16 mm Schnittlänge, 57 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706932"],[7,"1"],[14,"S262"],[16,"S2626.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684818"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"26.3"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"0.5"],[164,"6.0"],[181,"16.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976574]},"474911":{"c":"S2626.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 6 mm with 16 mm length of cut, 57 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 6 mm with 16 mm length of cut, 57 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 6 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 6 mm mit 16 mm Schnittlänge, 57 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 6 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706933"],[7,"1"],[14,"S262"],[16,"S2626.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684825"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"26.3"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[158,"1.0"],[164,"6.0"],[181,"16.0"],[260,"57.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976575]},"474912":{"c":"S2628.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 8 mm mit 20 mm Schnittlänge, 64 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 8 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706934"],[7,"1"],[14,"S262"],[16,"S2628.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684832"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"46.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"8.0"],[142,"h6"],[158,"0.3"],[164,"8.0"],[181,"20.0"],[260,"64.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976576]},"474913":{"c":"S2628.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 8 mm mit 20 mm Schnittlänge, 64 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 8 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706935"],[7,"1"],[14,"S262"],[16,"S2628.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684849"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"45.6"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"8.0"],[142,"h6"],[158,"0.5"],[164,"8.0"],[181,"20.0"],[260,"64.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976577]},"474914":{"c":"S2628.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 8 mm mit 20 mm Schnittlänge, 64 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 8 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706936"],[7,"1"],[14,"S262"],[16,"S2628.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684856"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"45.4"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"8.0"],[142,"h6"],[158,"1.0"],[164,"8.0"],[181,"20.0"],[260,"64.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976578]},"474915":{"c":"S2628.0XR1.5","s":["Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 1.5 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 1.5 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 8 mm mit 20 mm Schnittlänge, 64 mm Gesamtlänge und 1.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 8 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706937"],[7,"1"],[14,"S262"],[16,"S2628.0XR1.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684863"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"45.5"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"8.0"],[142,"h6"],[158,"1.5"],[164,"8.0"],[181,"20.0"],[260,"64.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976579]},"474916":{"c":"S2628.0XR2.0","s":["Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 8 mm with 20 mm length of cut, 64 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 8 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 8 mm mit 20 mm Schnittlänge, 64 mm Gesamtlänge und 2 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 8 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706938"],[7,"1"],[14,"S262"],[16,"S2628.0XR2.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684870"],[21,"15.0"],[22,"115.0"],[23,"13.0"],[24,"45.5"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"8.0"],[142,"h6"],[158,"2.0"],[164,"8.0"],[181,"20.0"],[260,"64.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976580]},"474917":{"c":"S26210.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 10 mm mit 22 mm Schnittlänge, 72 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 10 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706939"],[7,"1"],[14,"S262"],[16,"S26210.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684887"],[21,"17.0"],[22,"85.0"],[23,"17.0"],[24,"75.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[158,"0.3"],[164,"10.0"],[181,"22.0"],[260,"72.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976581]},"474918":{"c":"S26210.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 10 mm mit 22 mm Schnittlänge, 72 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 10 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706940"],[7,"1"],[14,"S262"],[16,"S26210.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684894"],[21,"17.0"],[22,"85.0"],[23,"17.0"],[24,"74.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[158,"0.5"],[164,"10.0"],[181,"22.0"],[260,"72.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976582]},"474919":{"c":"S26210.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 10 mm mit 22 mm Schnittlänge, 72 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 10 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706941"],[7,"1"],[14,"S262"],[16,"S26210.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684900"],[21,"16.0"],[22,"85.0"],[23,"17.0"],[24,"69.7"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[158,"1.0"],[164,"10.0"],[181,"22.0"],[260,"72.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976583]},"474920":{"c":"S26210.0XR1.5","s":["Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 1.5 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 1.5 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 10 mm mit 22 mm Schnittlänge, 72 mm Gesamtlänge und 1.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 10 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706942"],[7,"1"],[14,"S262"],[16,"S26210.0XR1.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684917"],[21,"17.0"],[22,"85.0"],[23,"17.0"],[24,"74.5"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[158,"1.5"],[164,"10.0"],[181,"22.0"],[260,"72.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976584]},"474921":{"c":"S26210.0XR2.0","s":["Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 10 mm with 22 mm length of cut, 72 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 10 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 10 mm mit 22 mm Schnittlänge, 72 mm Gesamtlänge und 2 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 10 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706943"],[7,"1"],[14,"S262"],[16,"S26210.0XR2.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684924"],[21,"17.0"],[22,"85.0"],[23,"17.0"],[24,"74.5"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[158,"2.0"],[164,"10.0"],[181,"22.0"],[260,"72.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976585]},"474922":{"c":"S26212.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 12 mm mit 26 mm Schnittlänge, 83 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 12 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706944"],[7,"1"],[14,"S262"],[16,"S26212.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684931"],[21,"17.0"],[22,"93.0"],[23,"17.0"],[24,"114.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[158,"0.3"],[164,"12.0"],[181,"26.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976586]},"474923":{"c":"S26212.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 12 mm mit 26 mm Schnittlänge, 83 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 12 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706945"],[7,"1"],[14,"S262"],[16,"S26212.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684948"],[21,"17.0"],[22,"88.0"],[23,"17.0"],[24,"121.6"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[158,"0.5"],[164,"12.0"],[181,"26.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976587]},"474924":{"c":"S26212.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 12 mm mit 26 mm Schnittlänge, 83 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 12 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706946"],[7,"1"],[14,"S262"],[16,"S26212.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684955"],[21,"17.0"],[22,"89.0"],[23,"17.0"],[24,"120.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[158,"1.0"],[164,"12.0"],[181,"26.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976588]},"474925":{"c":"S26212.0XR2.0","s":["Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 12 mm mit 26 mm Schnittlänge, 83 mm Gesamtlänge und 2 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 12 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706947"],[7,"1"],[14,"S262"],[16,"S26212.0XR2.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684962"],[21,"17.0"],[22,"85.0"],[23,"17.0"],[24,"119.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[158,"2.0"],[164,"12.0"],[181,"26.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976589]},"474926":{"c":"S26212.0XR2.5","s":["Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 2.5 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 2.5 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 12 mm mit 26 mm Schnittlänge, 83 mm Gesamtlänge und 2.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 12 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706948"],[7,"1"],[14,"S262"],[16,"S26212.0XR2.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684979"],[21,"17.0"],[22,"85.0"],[23,"17.0"],[24,"120.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[158,"2.5"],[164,"12.0"],[181,"26.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976590]},"474927":{"c":"S26212.0XR3.0","s":["Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 12 mm with 26 mm length of cut, 83 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 12 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 12 mm mit 26 mm Schnittlänge, 83 mm Gesamtlänge und 3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 12 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706949"],[7,"1"],[14,"S262"],[16,"S26212.0XR3.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684986"],[21,"17.0"],[22,"88.0"],[23,"17.0"],[24,"120.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[158,"3.0"],[164,"12.0"],[181,"26.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976591]},"474928":{"c":"S26214.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 14 mm mit 32 mm Schnittlänge, 83 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 14 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706950"],[7,"1"],[14,"S262"],[16,"S26214.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760684993"],[21,"21.0"],[22,"88.0"],[23,"21.0"],[24,"157.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"14.0"],[142,"h6"],[158,"0.3"],[164,"14.0"],[181,"32.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976592]},"474929":{"c":"S26214.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 14 mm mit 32 mm Schnittlänge, 83 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 14 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706951"],[7,"1"],[14,"S262"],[16,"S26214.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685006"],[21,"21.0"],[22,"88.0"],[23,"21.0"],[24,"156.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"14.0"],[142,"h6"],[158,"0.5"],[164,"14.0"],[181,"32.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976593]},"474930":{"c":"S26214.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 14 mm mit 32 mm Schnittlänge, 83 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 14 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706952"],[7,"1"],[14,"S262"],[16,"S26214.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685013"],[21,"21.0"],[22,"88.0"],[23,"21.0"],[24,"158.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"14.0"],[142,"h6"],[158,"1.0"],[164,"14.0"],[181,"32.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976594]},"474931":{"c":"S26214.0XR2.0","s":["Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 14 mm mit 32 mm Schnittlänge, 83 mm Gesamtlänge und 2 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 14 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706953"],[7,"1"],[14,"S262"],[16,"S26214.0XR2.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685020"],[21,"21.0"],[22,"90.0"],[23,"21.0"],[24,"157.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"14.0"],[142,"h6"],[158,"2.0"],[164,"14.0"],[181,"32.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976595]},"474932":{"c":"S26214.0XR3.0","s":["Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 14 mm with 32 mm length of cut, 83 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 14 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 14 mm mit 32 mm Schnittlänge, 83 mm Gesamtlänge und 3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 14 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706954"],[7,"1"],[14,"S262"],[16,"S26214.0XR3.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685037"],[21,"21.0"],[22,"90.0"],[23,"21.0"],[24,"157.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"14.0"],[142,"h6"],[158,"3.0"],[164,"14.0"],[181,"32.0"],[260,"83.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976596]},"474933":{"c":"S26216.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 16 mm mit 32 mm Schnittlänge, 92 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 16 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706955"],[7,"1"],[14,"S262"],[16,"S26216.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685044"],[21,"21.0"],[22,"98.0"],[23,"21.0"],[24,"230.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[158,"0.3"],[164,"16.0"],[181,"32.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976597]},"474934":{"c":"S26216.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 16 mm mit 32 mm Schnittlänge, 92 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 16 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706956"],[7,"1"],[14,"S262"],[16,"S26216.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685051"],[21,"21.0"],[22,"98.0"],[23,"21.0"],[24,"227.5"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[158,"0.5"],[164,"16.0"],[181,"32.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976598]},"474935":{"c":"S26216.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 16 mm mit 32 mm Schnittlänge, 92 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 16 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706957"],[7,"1"],[14,"S262"],[16,"S26216.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685068"],[21,"21.0"],[22,"98.0"],[23,"21.0"],[24,"229.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[158,"1.0"],[164,"16.0"],[181,"32.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976599]},"474936":{"c":"S26216.0XR2.0","s":["Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 16 mm mit 32 mm Schnittlänge, 92 mm Gesamtlänge und 2 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 16 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706958"],[7,"1"],[14,"S262"],[16,"S26216.0XR2.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685075"],[21,"21.0"],[22,"98.0"],[23,"21.0"],[24,"229.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[158,"2.0"],[164,"16.0"],[181,"32.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976600]},"474937":{"c":"S26216.0XR2.5","s":["Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 2.5 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 2.5 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 16 mm mit 32 mm Schnittlänge, 92 mm Gesamtlänge und 2.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 16 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706959"],[7,"1"],[14,"S262"],[16,"S26216.0XR2.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685082"],[21,"21.0"],[22,"98.0"],[23,"21.0"],[24,"230.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[158,"2.5"],[164,"16.0"],[181,"32.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976601]},"474938":{"c":"S26216.0XR3.0","s":["Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 16 mm mit 32 mm Schnittlänge, 92 mm Gesamtlänge und 3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 16 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706960"],[7,"1"],[14,"S262"],[16,"S26216.0XR3.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685099"],[21,"21.0"],[22,"98.0"],[23,"21.0"],[24,"230.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[158,"3.0"],[164,"16.0"],[181,"32.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976602]},"474939":{"c":"S26216.0XR4.0","s":["Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 4 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 16 mm with 32 mm length of cut, 92 mm overall length and 4 mm corner radii, according to Dormer Pramet standard with a 16 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 16 mm mit 32 mm Schnittlänge, 92 mm Gesamtlänge und 4 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 16 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706961"],[7,"1"],[14,"S262"],[16,"S26216.0XR4.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685105"],[21,"21.0"],[22,"95.0"],[23,"21.0"],[24,"230.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[158,"4.0"],[164,"16.0"],[181,"32.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976603]},"474940":{"c":"S26218.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 18 mm mit 38 mm Schnittlänge, 92 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 18 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706962"],[7,"1"],[14,"S262"],[16,"S26218.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685112"],[21,"30.0"],[22,"98.0"],[23,"30.0"],[24,"282.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"18.0"],[142,"h6"],[158,"0.3"],[164,"18.0"],[181,"38.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976604]},"474941":{"c":"S26218.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 18 mm mit 38 mm Schnittlänge, 92 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 18 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706963"],[7,"1"],[14,"S262"],[16,"S26218.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685129"],[21,"30.0"],[22,"98.0"],[23,"30.0"],[24,"281.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"18.0"],[142,"h6"],[158,"0.5"],[164,"18.0"],[181,"38.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976605]},"474942":{"c":"S26218.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 18 mm mit 38 mm Schnittlänge, 92 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 18 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706964"],[7,"1"],[14,"S262"],[16,"S26218.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685136"],[21,"30.0"],[22,"98.0"],[23,"30.0"],[24,"282.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"18.0"],[142,"h6"],[158,"1.0"],[164,"18.0"],[181,"38.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976606]},"474943":{"c":"S26218.0XR2.0","s":["Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 18 mm mit 38 mm Schnittlänge, 92 mm Gesamtlänge und 2 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 18 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706965"],[7,"1"],[14,"S262"],[16,"S26218.0XR2.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685143"],[21,"30.0"],[22,"108.0"],[23,"30.0"],[24,"282.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"18.0"],[142,"h6"],[158,"2.0"],[164,"18.0"],[181,"38.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976607]},"474944":{"c":"S26218.0XR3.0","s":["Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 18 mm with 38 mm length of cut, 92 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 18 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 18 mm mit 38 mm Schnittlänge, 92 mm Gesamtlänge und 3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 18 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706966"],[7,"1"],[14,"S262"],[16,"S26218.0XR3.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685150"],[21,"30.0"],[22,"98.0"],[23,"30.0"],[24,"282.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"18.0"],[142,"h6"],[158,"3.0"],[164,"18.0"],[181,"38.0"],[260,"92.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976608]},"474945":{"c":"S26220.0XR0.3","s":["Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 0.3 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 20 mm mit 38 mm Schnittlänge, 104 mm Gesamtlänge und 0.3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 20 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706967"],[7,"1"],[14,"S262"],[16,"S26220.0XR0.3"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685167"],[21,"30.0"],[22,"110.0"],[23,"30.0"],[24,"398.9"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[158,"0.3"],[164,"20.0"],[181,"38.0"],[260,"104.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976609]},"474946":{"c":"S26220.0XR0.5","s":["Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 0.5 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 20 mm mit 38 mm Schnittlänge, 104 mm Gesamtlänge und 0.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 20 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706968"],[7,"1"],[14,"S262"],[16,"S26220.0XR0.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685174"],[21,"30.0"],[22,"110.0"],[23,"30.0"],[24,"400.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[158,"0.5"],[164,"20.0"],[181,"38.0"],[260,"104.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976610]},"474947":{"c":"S26220.0XR1.0","s":["Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 1 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 20 mm mit 38 mm Schnittlänge, 104 mm Gesamtlänge und 1 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 20 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706969"],[7,"1"],[14,"S262"],[16,"S26220.0XR1.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685181"],[21,"30.0"],[22,"110.0"],[23,"30.0"],[24,"397.5"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[158,"1.0"],[164,"20.0"],[181,"38.0"],[260,"104.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976611]},"474948":{"c":"S26220.0XR2.0","s":["Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 2 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 20 mm mit 38 mm Schnittlänge, 104 mm Gesamtlänge und 2 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 20 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706970"],[7,"1"],[14,"S262"],[16,"S26220.0XR2.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685198"],[21,"30.0"],[22,"110.0"],[23,"30.0"],[24,"397.3"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[158,"2.0"],[164,"20.0"],[181,"38.0"],[260,"104.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976612]},"474949":{"c":"S26220.0XR2.5","s":["Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 2.5 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 2.5 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 20 mm mit 38 mm Schnittlänge, 104 mm Gesamtlänge und 2.5 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 20 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706971"],[7,"1"],[14,"S262"],[16,"S26220.0XR2.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685204"],[21,"30.0"],[22,"110.0"],[23,"30.0"],[24,"400.6"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[158,"2.5"],[164,"20.0"],[181,"38.0"],[260,"104.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976613]},"474950":{"c":"S26220.0XR3.0","s":["Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 3 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 20 mm mit 38 mm Schnittlänge, 104 mm Gesamtlänge und 3 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 20 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706972"],[7,"1"],[14,"S262"],[16,"S26220.0XR3.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685211"],[21,"30.0"],[22,"112.0"],[23,"30.0"],[24,"401.1"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[158,"3.0"],[164,"20.0"],[181,"38.0"],[260,"104.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976614]},"474951":{"c":"S26220.0XR4.0","s":["Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 4 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Short series corner radius end mill with 4 flutes, diameter 20 mm with 38 mm length of cut, 104 mm overall length and 4 mm corner radii, according to Dormer Pramet standard with a 20 mm plain shank, solid carbide with AlCrN coating, 40° helix with differential pitch and 4° rake angle for shoulder milling, plunging, progressive plunge milling, ramping and helical milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel, high-temperature alloys, chilled, hardened cast-iron and hardened steel <55HRC","Kurzer radiusfräser mit 4 Schneiden, Durchmesser 20 mm mit 38 mm Schnittlänge, 104 mm Gesamtlänge und 4 mm Eckenradius, gemäß Dormer Pramet Standard mit einem 20 mm Zylinderschaft, VHM mit AlCrN Beschichtung, 40° Helix mit Ungleichteilung und 4° Spanwinkel zum Schulterfräsen, Tauchfräsen, progressiven Eintauchfräsen, Rampenfräsen und Helikalfräsen in Martensitischer, Austenitischer und Superaustenitisch, Duplex oder ausscheidungsgehärtem Edelstahl, Hochwarmfeste Legierungen, angelassener gehärteter Stahl, Kokillenhartguss 0 und gehärteter Stahl <55HRC"],"o":"MY","a":[["P","primary"],["M","primary"],["S","primary"],["H","primary"]],"f":[[0,"6706973"],[7,"1"],[14,"S262"],[16,"S26220.0XR4.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760685228"],[21,"30.0"],[22,"110.0"],[23,"30.0"],[24,"400.0"],[31,"HM"],[32,"Work Norm"],[33,"AlCrN",null,"Revêtement nitrure de chrome aluminium","Aluminium-Chromnitrid-Beschichtung"],[34,"Cylindrical shank DIN 6535 HA",null,"Queue cylindrique DIN 6535 HA","DIN 6535 HA Zylindrischer Schaft"],[37,"4.0"],[47,"h9"],[52,"40"],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[158,"4.0"],[164,"20.0"],[181,"38.0"],[260,"104.0"],[276,"4.0"]],"m":[["dimensions",0]],"d":[],"x":[976615]}}}

Ajouter au panier

Ajouter à la liste de souhaits

Conditions générales de vente B2B
Politique de retour B2B

Spécifications

Variante (DP)	3.0XR0.3, 3.0XR0.5, 4.0XR0.3, 4.0XR0.5, 4.0XR1.0, 5.0XR0.3, 5.0XR0.5, 6.0XR0.3, 6.0XR0.5, 6.0XR1.0, 8.0XR0.3, 8.0XR0.5, 8.0XR1.0, 8.0XR1.5, 8.0XR2.0, 10.0XR0.3, 10.0XR0.5, 10.0XR1.0, 10.0XR1.5, 10.0XR2.0, 12.0XR0.3, 12.0XR0.5, 12.0XR1.0, 12.0XR2.0, 12.0XR2.5, 12.0XR3.0, 14.0XR0.3, 14.0XR0.5, 14.0XR1.0, 14.0XR2.0, 14.0XR3.0, 16.0XR0.3, 16.0XR0.5, 16.0XR1.0, 16.0XR2.0, 16.0XR2.5, 16.0XR3.0, 16.0XR4.0, 18.0XR0.3, 18.0XR0.5, 18.0XR1.0, 18.0XR2.0, 18.0XR3.0, 20.0XR0.3, 20.0XR0.5, 20.0XR1.0, 20.0XR2.0, 20.0XR2.5, 20.0XR3.0, 20.0XR4.0
Revêtement (DP)	Revêtement nitrure de chrome aluminium
Queue (DP)	Queue cylindrique DIN 6535 HA
Tolérance (DP)	h9

Produits alternatifs

Ces autres produits pourraient vous intéresser

S262 Fraise torique en carbure monobloc à 4 dents

Informations produit

Revêtement (DP)

Queue (DP)

Tolérance (DP)

Variante (DP)

Spécifications

Produits alternatifs