SSE09 45° Face Mill with Positive Design and Internal Coolant

Name: SSE09 45° Face Mill with Positive Design and Internal Coolant (20N2R032B20-SSE09-C)
SKU: 20N2R032B20-SSE09-C
Price: 256.73 EUR
Availability: InStock

PRAMET Czech Republic

256.73 €

excl. VAT

Product information

Face mill with positve/negative geometry which utilises 2 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 20 to maximum 29.8 mm with 45° approach angle and 20 mm Weldon shank according to DIN 1835B, 82 mm overall length, through coolant for face milling and chamfering with a maximum depth of cut of 4.5 mm

Ordering code (DP)
Schacht (DP)

{"v":1,"a":["https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/SSE09_A_CSP_DIM.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/SSE09_OP.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/20N2R032B20-SSE09-C_6758314_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/20N2R032B20-SSE09-C_6758314_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/25N3R042B25-SSE09-C_6758315_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/25N3R042B25-SSE09-C_6758315_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/32N4R042B32-SSE09-C_6758316_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/32N4R042B32-SSE09-C_6758316_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/SSE09_SA_CSP_DIM.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/32A04R-S45SE09F-C_6761701_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/32A04R-S45SE09F-C_6761701_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/40A04R-S45SE09F-C_6761698_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/40A04R-S45SE09F-C_6761698_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/50A05R-S45SE09F-C_6761683_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/50A05R-S45SE09F-C_6761683_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/63A05R-S45SE09F-C_6761625_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/63A05R-S45SE09F-C_6761625_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/63A06R-S45SE09F-C_6761702_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/63A06R-S45SE09F-C_6761702_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/80A06R-S45SE09F-C_6761668_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/80A06R-S45SE09F-C_6761668_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/80A08R-S45SE09F-C_6761684_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/80A08R-S45SE09F-C_6761684_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/100A10R-S45SE09F-C_6761685_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/100A10R-S45SE09F-C_6761685_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/125A09R-S45SE09F-C_6761670_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/125A09R-S45SE09F-C_6761670_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/125A12R-S45SE09F-C_6761699_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/125A12R-S45SE09F-C_6761699_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/SSE09_SC_DIM.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/160C10R-S45SE09F_6761671_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/160C10R-S45SE09F_6761671_3D.STP"],"p":{"483292":{"c":"20N2R032B20-SSE09-C","s":["Face mill with positve/negative geometry which utilises 2 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 20 to maximum 29.8 mm with 45° approach angle and 20 mm Weldon shank according to DIN 1835B, 82 mm overall length, through coolant for face milling and chamfering with a maximum depth of cut of 4.5 mm","Fraise à surfacer avec géométrie positive/négative qui utilise 2 des SE.. 09.... ou SE.. 09.... positive plaquettes, diamètre de coupe 20 mm avec 45° d'angle d'attaque et 20 mm queue Weldon selon DIN 1835B, 82 mm longueur totale, arrosage interne pour fraisage de surfaces planes et fraisage de chanfreins avec une profondeur de coupe maximum de 4.5 mm","Planfräser mit positiver/negativer Geometrie zum spannen von 2 Stück SE.. 09.... oder SE.. 09.... einseitigen Wendeschneidplatten, Schnittdurchmesser 20 bis maximal 29.8 mm mit 45° Anstellwinkel und 20 mm Weldon Schaft gemäß DIN 1835B, 82 mm Gesamtlänge, Kühlkanalbohrung zum Planfräsen und Entgratfräsen mit einer maximalen Schnitttiefe von 4.5 mm"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"6758314"],[7,"1"],[14,"SSE09"],[16,"20N2R032B20-SSE09-C"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602936608"],[21,"50.0"],[22,"142.0"],[23,"50.0"],[24,"260.0"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[50,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[75,"SSE09"],[98,"20.0"],[138,"20.0"],[164,"20.0"],[166,"29.8"],[181,"4.5"],[233,"2.0"],[260,"82.0"],[262,"2.0"],[276,"-5.0"],[279,"24600.0"],[313,"45.0"],[318,"32.0"]],"m":[["dimensions",0],["application",1]],"d":[["2d",2],["3d",3]]},"483293":{"c":"25N3R042B25-SSE09-C","s":["Face mill with positve/negative geometry which utilises 3 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 25 to maximum 34.8 mm with 45° approach angle and 25 mm Weldon shank according to DIN 1835B, 98 mm overall length, through coolant for face milling and chamfering with a maximum depth of cut of 4.5 mm","Fraise à surfacer avec géométrie positive/négative qui utilise 3 des SE.. 09.... ou SE.. 09.... positive plaquettes, diamètre de coupe 25 mm avec 45° d'angle d'attaque et 25 mm queue Weldon selon DIN 1835B, 98 mm longueur totale, arrosage interne pour fraisage de surfaces planes et fraisage de chanfreins avec une profondeur de coupe maximum de 4.5 mm","Planfräser mit positiver/negativer Geometrie zum spannen von 3 Stück SE.. 09.... oder SE.. 09.... einseitigen Wendeschneidplatten, Schnittdurchmesser 25 bis maximal 34.8 mm mit 45° Anstellwinkel und 25 mm Weldon Schaft gemäß DIN 1835B, 98 mm Gesamtlänge, Kühlkanalbohrung zum Planfräsen und Entgratfräsen mit einer maximalen Schnitttiefe von 4.5 mm"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"6758315"],[7,"1"],[14,"SSE09"],[16,"25N3R042B25-SSE09-C"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602936615"],[21,"50.0"],[22,"142.0"],[23,"50.0"],[24,"430.0"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"3.0"],[50,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[75,"SSE09"],[98,"20.0"],[138,"25.0"],[164,"25.0"],[166,"34.8"],[181,"4.5"],[233,"3.0"],[260,"98.0"],[262,"3.0"],[276,"-5.0"],[279,"22000.0"],[313,"45.0"],[318,"42.0"]],"m":[["dimensions",0],["application",1]],"d":[["2d",4],["3d",5]]},"483294":{"c":"32N4R042B32-SSE09-C","s":["Face mill with positve/negative geometry which utilises 4 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 32 to maximum 42.0 mm with 45° approach angle and 32 mm Weldon shank according to DIN 1835B, 102 mm overall length, through coolant for face milling and chamfering with a maximum depth of cut of 4.5 mm","Fraise à surfacer avec géométrie positive/négative qui utilise 4 des SE.. 09.... ou SE.. 09.... positive plaquettes, diamètre de coupe 32 mm avec 45° d'angle d'attaque et 32 mm queue Weldon selon DIN 1835B, 102 mm longueur totale, arrosage interne pour fraisage de surfaces planes et fraisage de chanfreins avec une profondeur de coupe maximum de 4.5 mm","Planfräser mit positiver/negativer Geometrie zum spannen von 4 Stück SE.. 09.... oder SE.. 09.... einseitigen Wendeschneidplatten, Schnittdurchmesser 32 bis maximal 42.0 mm mit 45° Anstellwinkel und 32 mm Weldon Schaft gemäß DIN 1835B, 102 mm Gesamtlänge, Kühlkanalbohrung zum Planfräsen und Entgratfräsen mit einer maximalen Schnitttiefe von 4.5 mm"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"6758316"],[7,"1"],[14,"SSE09"],[16,"32N4R042B32-SSE09-C"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602936622"],[21,"50.0"],[22,"142.0"],[23,"50.0"],[24,"680.0"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"4.0"],[50,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[75,"SSE09"],[98,"20.0"],[138,"32.0"],[164,"32.0"],[166,"42.0"],[181,"4.5"],[233,"4.0"],[260,"102.0"],[262,"4.0"],[276,"-5.0"],[279,"19400.0"],[313,"45.0"],[318,"42.0"]],"m":[["dimensions",0],["application",1]],"d":[["2d",6],["3d",7]]},"483295":{"c":"32A04R-S45SE09F-C","s":["Face mill with positve/negative geometry which utilises 4 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 32 to maximum 42.0 mm with 45° approach angle and 16 mm connection bore according to DIN 8030-A, 40 mm protrusion length, through coolant and differential pitch for face milling and chamfering with a maximum depth of cut of 4.5 mm","Fraise à surfacer avec géométrie positive/négative qui utilise 4 des SE.. 09.... ou SE.. 09.... positive plaquettes, diamètre de coupe 32 mm avec 45° d'angle d'attaque et 16 mm alésage de connexion selon DIN 8030-A, 40 mm longueur utile, arrosage interne et un pas différentiel pour fraisage de surfaces planes et fraisage de chanfreins avec une profondeur de coupe maximum de 4.5 mm","Planfräser mit positiver/negativer Geometrie zum spannen von 4 Stück SE.. 09.... oder SE.. 09.... einseitigen Wendeschneidplatten, Schnittdurchmesser 32 bis maximal 42.0 mm mit 45° Anstellwinkel und 16 mm Verbindungsbohrung gemäß DIN 8030-A, 40 mm Überstandslänge, Kühlkanalbohrung und ungleiche Teilung zum Planfräsen und Entgratfräsen mit einer maximalen Schnitttiefe von 4.5 mm"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"6761701"],[7,"1"],[14,"SSE09"],[16,"32A04R-S45SE09F-C"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602970473"],[21,"115.0"],[22,"150.0"],[23,"62.0"],[24,"240.0"],[34,"Shell mill DIN 8030 A",null,"Alésage pour montage court DIN 8030 A","Aufsteckfräser DIN 8030 A"],[37,"4.0"],[50,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[75,"SSE09"],[98,"20.0"],[138,"16.0"],[160,"14.0"],[164,"32.0"],[166,"42.0"],[176,"Yes","Ja",null,null],[181,"4.5"],[211,"40.0"],[233,"4.0"],[240,"6.4"],[241,"8.4"],[262,"4.0"],[276,"-5.0"],[279,"19400.0"],[313,"45.0"]],"m":[["dimensions",8],["application",1]],"d":[["2d",9],["3d",10]]},"483296":{"c":"40A04R-S45SE09F-C","s":["Face mill with positve/negative geometry which utilises 4 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 40 to maximum 53.2 mm with 45° approach angle and 16 mm connection bore according to DIN 8030-A, 40 mm protrusion length, through coolant and differential pitch for face milling and chamfering with a maximum depth of cut of 4.5 mm","Fraise à surfacer avec géométrie positive/négative qui utilise 4 des SE.. 09.... ou SE.. 09.... positive plaquettes, diamètre de coupe 40 mm avec 45° d'angle d'attaque et 16 mm alésage de connexion selon DIN 8030-A, 40 mm longueur utile, arrosage interne et un pas différentiel pour fraisage de surfaces planes et fraisage de chanfreins avec une profondeur de coupe maximum de 4.5 mm","Planfräser mit positiver/negativer Geometrie zum spannen von 4 Stück SE.. 09.... oder SE.. 09.... einseitigen Wendeschneidplatten, Schnittdurchmesser 40 bis maximal 53.2 mm mit 45° Anstellwinkel und 16 mm Verbindungsbohrung gemäß DIN 8030-A, 40 mm Überstandslänge, Kühlkanalbohrung und ungleiche Teilung zum Planfräsen und Entgratfräsen mit einer maximalen Schnitttiefe von 4.5 mm"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"6761698"],[7,"1"],[14,"SSE09"],[16,"40A04R-S45SE09F-C"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602970442"],[21,"115.0"],[22,"150.0"],[23,"62.0"],[24,"300.0"],[34,"Shell mill DIN 8030 A",null,"Alésage pour montage court DIN 8030 A","Aufsteckfräser DIN 8030 A"],[37,"4.0"],[50,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[75,"SSE09"],[98,"20.0"],[138,"16.0"],[160,"14.0"],[164,"40.0"],[166,"53.2"],[176,"Yes","Ja",null,null],[181,"4.5"],[211,"40.0"],[233,"4.0"],[240,"6.4"],[241,"8.4"],[262,"4.0"],[276,"-5.0"],[279,"17400.0"],[313,"45.0"]],"m":[["dimensions",8],["application",1]],"d":[["2d",11],["3d",12]]},"483297":{"c":"50A05R-S45SE09F-C","s":["Face mill with positve/negative geometry which utilises 5 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 50 to maximum 59.6 mm with 45° approach angle and 22 mm connection bore according to DIN 8030-A, 40 mm protrusion length, through coolant and differential pitch for face milling and chamfering with a maximum depth of cut of 4.5 mm","Fraise à surfacer avec géométrie positive/négative qui utilise 5 des SE.. 09.... ou SE.. 09.... positive plaquettes, diamètre de coupe 50 mm avec 45° d'angle d'attaque et 22 mm alésage de connexion selon DIN 8030-A, 40 mm longueur utile, arrosage interne et un pas différentiel pour fraisage de surfaces planes et fraisage de chanfreins avec une profondeur de coupe maximum de 4.5 mm","Planfräser mit positiver/negativer Geometrie zum spannen von 5 Stück SE.. 09.... oder SE.. 09.... einseitigen Wendeschneidplatten, Schnittdurchmesser 50 bis maximal 59.6 mm mit 45° Anstellwinkel und 22 mm Verbindungsbohrung gemäß DIN 8030-A, 40 mm Überstandslänge, Kühlkanalbohrung und ungleiche Teilung zum Planfräsen und Entgratfräsen mit einer maximalen Schnitttiefe von 4.5 mm"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"6761683"],[7,"1"],[14,"SSE09"],[16,"50A05R-S45SE09F-C"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602970299"],[21,"115.0"],[22,"150.0"],[23,"62.0"],[24,"547.9"],[34,"Shell mill DIN 8030 A",null,"Alésage pour montage court DIN 8030 A","Aufsteckfräser DIN 8030 A"],[37,"5.0"],[50,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[75,"SSE09"],[98,"20.0"],[138,"22.0"],[160,"18.0"],[164,"50.0"],[166,"59.6"],[176,"Yes","Ja",null,null],[181,"4.5"],[211,"40.0"],[233,"5.0"],[240,"6.4"],[241,"10.4"],[262,"5.0"],[276,"-5.0"],[279,"15600.0"],[313,"45.0"]],"m":[["dimensions",8],["application",1]],"d":[["2d",13],["3d",14]]},"483298":{"c":"63A05R-S45SE09F-C","s":["Face mill with positve/negative geometry which utilises 5 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 63 to maximum 75.8 mm with 45° approach angle and 22 mm connection bore according to DIN 8030-A, 40 mm protrusion length, through coolant and differential pitch for face milling and chamfering with a maximum depth of cut of 4.5 mm","Fraise à surfacer avec géométrie positive/négative qui utilise 5 des SE.. 09.... ou SE.. 09.... positive plaquettes, diamètre de coupe 63 mm avec 45° d'angle d'attaque et 22 mm alésage de connexion selon DIN 8030-A, 40 mm longueur utile, arrosage interne et un pas différentiel pour fraisage de surfaces planes et fraisage de chanfreins avec une profondeur de coupe maximum de 4.5 mm","Planfräser mit positiver/negativer Geometrie zum spannen von 5 Stück SE.. 09.... oder SE.. 09.... einseitigen Wendeschneidplatten, Schnittdurchmesser 63 bis maximal 75.8 mm mit 45° Anstellwinkel und 22 mm Verbindungsbohrung gemäß DIN 8030-A, 40 mm Überstandslänge, Kühlkanalbohrung und ungleiche Teilung zum Planfräsen und Entgratfräsen mit einer maximalen Schnitttiefe von 4.5 mm"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"6761625"],[7,"1"],[14,"SSE09"],[16,"63A05R-S45SE09F-C"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602969712"],[21,"115.0"],[22,"150.0"],[23,"62.0"],[24,"664.2"],[34,"Shell mill DIN 8030 A",null,"Alésage pour montage court DIN 8030 A","Aufsteckfräser DIN 8030 A"],[37,"5.0"],[50,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[75,"SSE09"],[98,"20.0"],[138,"22.0"],[160,"18.0"],[164,"63.0"],[166,"75.8"],[176,"Yes","Ja",null,null],[181,"4.5"],[211,"40.0"],[233,"5.0"],[240,"6.4"],[241,"10.4"],[262,"5.0"],[276,"-5.0"],[279,"13900.0"],[313,"45.0"]],"m":[["dimensions",8],["application",1]],"d":[["2d",15],["3d",16]]},"483299":{"c":"63A06R-S45SE09F-C","s":["Face mill with positve/negative geometry which utilises 6 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 63 to maximum 75.8 mm with 45° approach angle and 22 mm connection bore according to DIN 8030-A, 40 mm protrusion length, through coolant and differential pitch for face milling and chamfering with a maximum depth of cut of 4.5 mm","Fraise à surfacer avec géométrie positive/négative qui utilise 6 des SE.. 09.... ou SE.. 09.... positive plaquettes, diamètre de coupe 63 mm avec 45° d'angle d'attaque et 22 mm alésage de connexion selon DIN 8030-A, 40 mm longueur utile, arrosage interne et un pas différentiel pour fraisage de surfaces planes et fraisage de chanfreins avec une profondeur de coupe maximum de 4.5 mm","Planfräser mit positiver/negativer Geometrie zum spannen von 6 Stück SE.. 09.... oder SE.. 09.... einseitigen Wendeschneidplatten, Schnittdurchmesser 63 bis maximal 75.8 mm mit 45° Anstellwinkel und 22 mm Verbindungsbohrung gemäß DIN 8030-A, 40 mm Überstandslänge, Kühlkanalbohrung und ungleiche Teilung zum Planfräsen und Entgratfräsen mit einer maximalen Schnitttiefe von 4.5 mm"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"6761702"],[7,"1"],[14,"SSE09"],[16,"63A06R-S45SE09F-C"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602970480"],[21,"115.0"],[22,"150.0"],[23,"62.0"],[24,"580.0"],[34,"Shell mill DIN 8030 A",null,"Alésage pour montage court DIN 8030 A","Aufsteckfräser DIN 8030 A"],[37,"6.0"],[50,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[75,"SSE09"],[98,"20.0"],[138,"22.0"],[160,"18.0"],[164,"63.0"],[166,"75.8"],[176,"Yes","Ja",null,null],[181,"4.5"],[211,"40.0"],[233,"6.0"],[240,"6.4"],[241,"10.4"],[262,"6.0"],[276,"-5.0"],[279,"13900.0"],[313,"45.0"]],"m":[["dimensions",8],["application",1]],"d":[["2d",17],["3d",18]]},"483300":{"c":"80A06R-S45SE09F-C","s":["Face mill with positve/negative geometry which utilises 6 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 80 to maximum 89.6 mm with 45° approach angle and 27 mm connection bore according to DIN 8030-A, 50 mm protrusion length, through coolant and differential pitch for face milling and chamfering with a maximum depth of cut of 4.5 mm","Fraise à surfacer avec géométrie positive/négative qui utilise 6 des SE.. 09.... ou SE.. 09.... positive plaquettes, diamètre de coupe 80 mm avec 45° d'angle d'attaque et 27 mm alésage de connexion selon DIN 8030-A, 50 mm longueur utile, arrosage interne et un pas différentiel pour fraisage de surfaces planes et fraisage de chanfreins avec une profondeur de coupe maximum de 4.5 mm","Planfräser mit positiver/negativer Geometrie zum spannen von 6 Stück SE.. 09.... oder SE.. 09.... einseitigen Wendeschneidplatten, Schnittdurchmesser 80 bis maximal 89.6 mm mit 45° Anstellwinkel und 27 mm Verbindungsbohrung gemäß DIN 8030-A, 50 mm Überstandslänge, Kühlkanalbohrung und ungleiche Teilung zum Planfräsen und Entgratfräsen mit einer maximalen Schnitttiefe von 4.5 mm"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"6761668"],[7,"1"],[14,"SSE09"],[16,"80A06R-S45SE09F-C"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602970145"],[21,"115.0"],[22,"150.0"],[23,"62.0"],[24,"1140.0"],[34,"Shell mill DIN 8030 A",null,"Alésage pour montage court DIN 8030 A","Aufsteckfräser DIN 8030 A"],[37,"6.0"],[50,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[75,"SSE09"],[98,"20.0"],[138,"27.0"],[160,"38.0"],[164,"80.0"],[166,"89.6"],[176,"Yes","Ja",null,null],[181,"4.5"],[211,"50.0"],[233,"6.0"],[240,"7.0"],[241,"12.4"],[262,"6.0"],[276,"-5.0"],[279,"12300.0"],[313,"45.0"]],"m":[["dimensions",8],["application",1]],"d":[["2d",19],["3d",20]]},"483301":{"c":"80A08R-S45SE09F-C","s":["Face mill with positve/negative geometry which utilises 8 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 80 to maximum 89.6 mm with 45° approach angle and 27 mm connection bore according to DIN 8030-A, 50 mm protrusion length, through coolant and differential pitch for face milling and chamfering with a maximum depth of cut of 4.5 mm","Fraise à surfacer avec géométrie positive/négative qui utilise 8 des SE.. 09.... ou SE.. 09.... positive plaquettes, diamètre de coupe 80 mm avec 45° d'angle d'attaque et 27 mm alésage de connexion selon DIN 8030-A, 50 mm longueur utile, arrosage interne et un pas différentiel pour fraisage de surfaces planes et fraisage de chanfreins avec une profondeur de coupe maximum de 4.5 mm","Planfräser mit positiver/negativer Geometrie zum spannen von 8 Stück SE.. 09.... oder SE.. 09.... einseitigen Wendeschneidplatten, Schnittdurchmesser 80 bis maximal 89.6 mm mit 45° Anstellwinkel und 27 mm Verbindungsbohrung gemäß DIN 8030-A, 50 mm Überstandslänge, Kühlkanalbohrung und ungleiche Teilung zum Planfräsen und Entgratfräsen mit einer maximalen Schnitttiefe von 4.5 mm"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"6761684"],[7,"1"],[14,"SSE09"],[16,"80A08R-S45SE09F-C"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602970305"],[21,"115.0"],[22,"150.0"],[23,"62.0"],[24,"1130.0"],[34,"Shell mill DIN 8030 A",null,"Alésage pour montage court DIN 8030 A","Aufsteckfräser DIN 8030 A"],[37,"8.0"],[50,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[75,"SSE09"],[98,"20.0"],[138,"27.0"],[160,"38.0"],[164,"80.0"],[166,"89.6"],[176,"Yes","Ja",null,null],[181,"4.5"],[211,"50.0"],[233,"8.0"],[240,"7.0"],[241,"12.4"],[262,"8.0"],[276,"-5.0"],[279,"12300.0"],[313,"45.0"]],"m":[["dimensions",8],["application",1]],"d":[["2d",21],["3d",22]]},"483302":{"c":"100A10R-S45SE09F-C","s":["Face mill with positve/negative geometry which utilises 10 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 100 to maximum 110.0 mm with 45° approach angle and 32 mm connection bore according to DIN 8030-A, 50 mm protrusion length, through coolant and differential pitch for face milling and chamfering with a maximum depth of cut of 4.5 mm","Fraise à surfacer avec géométrie positive/négative qui utilise 10 des SE.. 09.... ou SE.. 09.... positive plaquettes, diamètre de coupe 100 mm avec 45° d'angle d'attaque et 32 mm alésage de connexion selon DIN 8030-A, 50 mm longueur utile, arrosage interne et un pas différentiel pour fraisage de surfaces planes et fraisage de chanfreins avec une profondeur de coupe maximum de 4.5 mm","Planfräser mit positiver/negativer Geometrie zum spannen von 10 Stück SE.. 09.... oder SE.. 09.... einseitigen Wendeschneidplatten, Schnittdurchmesser 100 bis maximal 110.0 mm mit 45° Anstellwinkel und 32 mm Verbindungsbohrung gemäß DIN 8030-A, 50 mm Überstandslänge, Kühlkanalbohrung und ungleiche Teilung zum Planfräsen und Entgratfräsen mit einer maximalen Schnitttiefe von 4.5 mm"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"6761685"],[7,"1"],[14,"SSE09"],[16,"100A10R-S45SE09F-C"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602970312"],[21,"220.0"],[22,"222.0"],[23,"85.0"],[24,"1820.0"],[34,"Shell mill DIN 8030 A",null,"Alésage pour montage court DIN 8030 A","Aufsteckfräser DIN 8030 A"],[37,"10.0"],[50,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[75,"SSE09"],[98,"20.0"],[138,"32.0"],[160,"45.0"],[164,"100.0"],[166,"110.0"],[176,"Yes","Ja",null,null],[181,"4.5"],[211,"50.0"],[233,"10.0"],[240,"8.0"],[241,"14.4"],[262,"10.0"],[276,"-5.0"],[279,"10900.0"],[313,"45.0"]],"m":[["dimensions",8],["application",1]],"d":[["2d",23],["3d",24]]},"483303":{"c":"125A09R-S45SE09F-C","s":["Face mill with positve/negative geometry which utilises 9 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 125 to maximum 134.5 mm with 45° approach angle and 40 mm connection bore according to DIN 8030-A, 63 mm protrusion length, through coolant and differential pitch for face milling and chamfering with a maximum depth of cut of 4.5 mm","Fraise à surfacer avec géométrie positive/négative qui utilise 9 des SE.. 09.... ou SE.. 09.... positive plaquettes, diamètre de coupe 125 mm avec 45° d'angle d'attaque et 40 mm alésage de connexion selon DIN 8030-A, 63 mm longueur utile, arrosage interne et un pas différentiel pour fraisage de surfaces planes et fraisage de chanfreins avec une profondeur de coupe maximum de 4.5 mm","Planfräser mit positiver/negativer Geometrie zum spannen von 9 Stück SE.. 09.... oder SE.. 09.... einseitigen Wendeschneidplatten, Schnittdurchmesser 125 bis maximal 134.5 mm mit 45° Anstellwinkel und 40 mm Verbindungsbohrung gemäß DIN 8030-A, 63 mm Überstandslänge, Kühlkanalbohrung und ungleiche Teilung zum Planfräsen und Entgratfräsen mit einer maximalen Schnitttiefe von 4.5 mm"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"6761670"],[7,"1"],[14,"SSE09"],[16,"125A09R-S45SE09F-C"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602970169"],[21,"220.0"],[22,"222.0"],[23,"85.0"],[24,"3870.0"],[34,"Shell mill DIN 8030 A",null,"Alésage pour montage court DIN 8030 A","Aufsteckfräser DIN 8030 A"],[37,"9.0"],[50,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[75,"SSE09"],[98,"20.0"],[138,"40.0"],[160,"60.0"],[164,"125.0"],[166,"134.5"],[176,"Yes","Ja",null,null],[181,"4.5"],[211,"63.0"],[233,"9.0"],[240,"9.0"],[241,"16.4"],[262,"9.0"],[276,"-5.0"],[279,"9800.0"],[313,"45.0"]],"m":[["dimensions",8],["application",1]],"d":[["2d",25],["3d",26]]},"483304":{"c":"125A12R-S45SE09F-C","s":["Face mill with positve/negative geometry which utilises 12 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 125 to maximum 134.5 mm with 45° approach angle and 40 mm connection bore according to DIN 8030-A, 63 mm protrusion length, through coolant and differential pitch for face milling and chamfering with a maximum depth of cut of 4.5 mm","Fraise à surfacer avec géométrie positive/négative qui utilise 12 des SE.. 09.... ou SE.. 09.... positive plaquettes, diamètre de coupe 125 mm avec 45° d'angle d'attaque et 40 mm alésage de connexion selon DIN 8030-A, 63 mm longueur utile, arrosage interne et un pas différentiel pour fraisage de surfaces planes et fraisage de chanfreins avec une profondeur de coupe maximum de 4.5 mm","Planfräser mit positiver/negativer Geometrie zum spannen von 12 Stück SE.. 09.... oder SE.. 09.... einseitigen Wendeschneidplatten, Schnittdurchmesser 125 bis maximal 134.5 mm mit 45° Anstellwinkel und 40 mm Verbindungsbohrung gemäß DIN 8030-A, 63 mm Überstandslänge, Kühlkanalbohrung und ungleiche Teilung zum Planfräsen und Entgratfräsen mit einer maximalen Schnitttiefe von 4.5 mm"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"6761699"],[7,"1"],[14,"SSE09"],[16,"125A12R-S45SE09F-C"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602970459"],[21,"220.0"],[22,"222.0"],[23,"85.0"],[24,"3870.0"],[34,"Shell mill DIN 8030 A",null,"Alésage pour montage court DIN 8030 A","Aufsteckfräser DIN 8030 A"],[37,"12.0"],[50,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[75,"SSE09"],[98,"20.0"],[138,"40.0"],[160,"60.0"],[164,"125.0"],[166,"134.5"],[176,"Yes","Ja",null,null],[181,"4.5"],[211,"63.0"],[233,"12.0"],[240,"9.0"],[241,"16.4"],[262,"12.0"],[276,"-5.0"],[279,"9800.0"],[313,"45.0"]],"m":[["dimensions",8],["application",1]],"d":[["2d",27],["3d",28]]},"483305":{"c":"160C10R-S45SE09F","s":["Face mill with positve/negative geometry which utilises 10 of SE.. 09.... or SE.. 09.... single-sided inserts, cutting diameter 160 to maximum 169.6 mm with 45° approach angle and 40 mm connection bore according to DIN 8030-C, 63 mm protrusion length and differential pitch for face milling and chamfering with a maximum depth of cut of 4.5 mm","Fraise à surfacer avec géométrie positive/négative qui utilise 10 des SE.. 09.... ou SE.. 09.... positive plaquettes, diamètre de coupe 160 mm avec 45° d'angle d'attaque et 40 mm alésage de connexion selon DIN 8030-C, 63 mm longueur utile et un pas différentiel pour fraisage de surfaces planes et fraisage de chanfreins avec une profondeur de coupe maximum de 4.5 mm","Planfräser mit positiver/negativer Geometrie zum spannen von 10 Stück SE.. 09.... oder SE.. 09.... einseitigen Wendeschneidplatten, Schnittdurchmesser 160 bis maximal 169.6 mm mit 45° Anstellwinkel und 40 mm Verbindungsbohrung gemäß DIN 8030-C, 63 mm Überstandslänge und ungleiche Teilung zum Planfräsen und Entgratfräsen mit einer maximalen Schnitttiefe von 4.5 mm"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"6761671"],[7,"1"],[14,"SSE09"],[16,"160C10R-S45SE09F"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602970176"],[21,"220.0"],[22,"222.0"],[23,"85.0"],[24,"6210.0"],[34,"Shell mill DIN 8030 A",null,"Alésage pour montage court DIN 8030 A","Aufsteckfräser DIN 8030 A"],[37,"10.0"],[50,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[75,"SSE09"],[98,"20.0"],[138,"40.0"],[164,"160.0"],[166,"169.6"],[176,"Yes","Ja",null,null],[181,"4.5"],[187,"66.7"],[211,"63.0"],[233,"10.0"],[240,"9.0"],[241,"16.4"],[262,"10.0"],[276,"-5.0"],[279,"8700.0"],[313,"45.0"]],"m":[["dimensions",29],["application",1]],"d":[["2d",30],["3d",31]]}}}

Add to cart

Add to wishlist

General B2B terms and conditions of sale
B2B return policy

Specifications

Ordering code (DP)	20N2R032B20-SSE09-C, 25N3R042B25-SSE09-C, 32N4R042B32-SSE09-C, 32A04R-S45SE09F-C, 40A04R-S45SE09F-C, 50A05R-S45SE09F-C, 63A05R-S45SE09F-C, 63A06R-S45SE09F-C, 80A06R-S45SE09F-C, 80A08R-S45SE09F-C, 100A10R-S45SE09F-C, 125A09R-S45SE09F-C, 125A12R-S45SE09F-C, 160C10R-S45SE09F
Schacht (DP)	Shell mill DIN 8030 A, Weldon shank DIN 1835B

SSE09 45° Face Mill with Positive Design and Internal Coolant

Product information

Ordering code (DP)

Schacht (DP)

Specifications