STFC(RL) INT Binnendraaibeitel ISO S - rechts

Name: STFC(RL) INT Binnendraaibeitel ISO S - rechts (A10K-STFCR 09)
SKU: A10K-STFCR 09
Price: 111.93 EUR
Availability: InStock

PRAMET Tsjechië Zweden

111,93 €

excl. BTW

Productinformatie

Schroefklemboorstang voor het opnemen van een driehoekige positieve wisselplaat met een ingeschreven cirkeldiameter van 5,56 mm, 2,38 mm dik (ISO-aanduiding TC.. 0902..), rechtshandig 90° eindsnijdend met versprongen schacht, staal met koelmiddelkanaal, 10 mm diameter x 125 mm lang voor conisch boren en langsdraaien met en zonder schouder

Bestelcode (DP)

{"v":1,"a":["https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/STFC_RL__INT_DIM.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/STFC_RL__INT_OP.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A12M-STFCR11-A_8998325_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A12M-STFCR11-A_8998325_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A16R-STFCR11-A_8998327_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A16R-STFCR11-A_8998327_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S10H-STFCR11_6756911_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A20S-STFCR11-A_8998329_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A20S-STFCR11-A_8998329_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S12K-STFCR11_6757052_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S16M-STFCR11_6756913_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A25T-STFCR16_8923004_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A25T-STFCR16_8923004_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S20Q-STFCR11_6756894_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A32T-STFCR16_8923006_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A32T-STFCR16_8923006_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S25T-STFCR16_6757110_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S32U-STFCR16-A_6756657_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A12M-STFCL11-A_8998324_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A12M-STFCL11-A_8998324_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A16R-STFCL11-A_8998326_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A16R-STFCL11-A_8998326_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A20S-STFCL11-A_8998328_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A20S-STFCL11-A_8998328_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S10H-STFCL11_6756858_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S12K-STFCL11_6757091_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A25T-STFCL16_8923003_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A25T-STFCL16_8923003_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S16M-STFCL11_6757227_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A32T-STFCL16_8923005_2D.DXF","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/A32T-STFCL16_8923005_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S25T-STFCL16_6757011_3D.STP","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S32U-STFCL16-A_6756656_3D.STP"],"p":{"483394":{"c":"A10K-STFCR 09","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 5.56 mm, 2.38 mm thick (ISO designation TC.. 0902.. ), right hand 90° end cutting with off-set shank, steel with coolant hole, 10 mm diameter x 125 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 5.56 mm, 2.38 mm d'épaisseur (désignation ISO TC.. 0902.. ), à droite coupe en bout à 90° avec queue décalée acier avec arrosage centralisé, 10 mm diamètre x 125 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 5.56 mm, 2.38 mm Dick (ISO Bezeichnung TC.. 0902.. ), rechte Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl mit Kühlkanalbohrung, 10 mm Durchmesser x 125 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"SE","a":[],"f":[[0,"6760916"],[7,"1"],[14,"STFC(RL) INT"],[16,"A10K-STFCR 09"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602962621"],[21,"50.0"],[22,"142.0"],[23,"50.0"],[24,"60.0"],[48,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[73,"09"],[138,"10.0"],[211,"125.0"],[214,"7.0"],[227,"-9.0"],[249,"13.0"],[256,"0.0"],[281,"9.0"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[]},"483395":{"c":"A12M-STFCR 11-A","s":["A12M-STFCR 11-A Internal turning tool. Steel body. Boring operations. Longitudinal turning. Side and end cutting capability. Suitable for machining with and without shoulder. For general internal machining applications.","A12M-STFCR 11-A Outil de tournage interne. Corps en acier. Opérations d'alésage. Tournage longitudinal. Capacité de coupe latérale et frontale. Convient pour l'usinage avec ou sans épaulement. Pour les applications générales d'usinage interne.","A12M-STFCR 11-A Innen-Drehwerkzeug. Stahlkörper. Bohrvorgänge. Längsdrehen. Seitliche und stirnseitige Schneidfähigkeit. Geeignet für die Bearbeitung mit und ohne Schulter. Für allgemeine Innenbearbeitungsanwendungen."],"o":"CZ","a":[],"f":[[0,"8998325"],[7,"1"],[14,"STFC(RL) INT"],[16,"A12M-STFCR 11-A"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604794077"],[21,"22.0"],[22,"150.0"],[23,"22.0"],[24,"115.6"],[48,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[73,"11"],[138,"12.0"],[211,"150.0"],[214,"9.0"],[227,"-7.0"],[249,"16.0"],[256,"0.0"],[281,"11.0"],[313,"91.0"]],"m":[["dimensions",0],["application",1]],"d":[["2d",2],["3d",3]]},"483396":{"c":"A16R-STFCR 11-A","s":["A16R-STFCR 11-A Internal turning tool. Steel body. Boring operations. Longitudinal turning. Side and end cutting capability. Suitable for machining with and without shoulder. For general internal machining applications.","A16R-STFCR 11-A Outil de tournage interne. Corps en acier. Opérations d'alésage. Tournage longitudinal. Capacité de coupe latérale et frontale. Convient pour l'usinage avec ou sans épaulement. Pour les applications générales d'usinage interne.","A16R-STFCR 11-A Innen-Drehwerkzeug. Stahlkörper. Bohrvorgänge. Längsdrehen. Seitliche und stirnseitige Schneidfähigkeit. Geeignet für die Bearbeitung mit und ohne Schulter. Für allgemeine Innenbearbeitungsanwendungen."],"o":"CZ","a":[],"f":[[0,"8998327"],[7,"1"],[14,"STFC(RL) INT"],[16,"A16R-STFCR 11-A"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604794091"],[21,"26.0"],[22,"200.0"],[23,"26.0"],[24,"254.7"],[48,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[73,"11"],[138,"16.0"],[211,"200.0"],[214,"11.0"],[227,"-4.0"],[249,"20.0"],[256,"0.0"],[281,"15.0"],[313,"91.0"]],"m":[["dimensions",0],["application",1]],"d":[["2d",4],["3d",5]]},"483397":{"c":"A12M-STFCR 09","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 5.56 mm, 2.38 mm thick (ISO designation TC.. 0902.. ), right hand 90° end cutting with off-set shank, steel with coolant hole, 12 mm diameter x 150 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 5.56 mm, 2.38 mm d'épaisseur (désignation ISO TC.. 0902.. ), à droite coupe en bout à 90° avec queue décalée acier avec arrosage centralisé, 12 mm diamètre x 150 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 5.56 mm, 2.38 mm Dick (ISO Bezeichnung TC.. 0902.. ), rechte Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl mit Kühlkanalbohrung, 12 mm Durchmesser x 150 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"SE","a":[],"f":[[0,"6760918"],[7,"1"],[14,"STFC(RL) INT"],[16,"A12M-STFCR 09"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602962645"],[21,"50.0"],[22,"172.0"],[23,"50.0"],[24,"120.0"],[48,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[73,"09"],[138,"12.0"],[211,"150.0"],[214,"9.0"],[227,"-6.5"],[249,"16.0"],[256,"0.0"],[281,"11.0"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[]},"483398":{"c":"S10H-STFCR 11","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 6.35 mm, 2.38 mm thick (ISO designation TC.. 1102.. ), right hand 90° end cutting with off-set shank, steel without coolant hole, 10 mm diameter x 100 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur (désignation ISO TC.. 1102.. ), à droite coupe en bout à 90° avec queue décalée acier sans arrosage centralisé, 10 mm diamètre x 100 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick (ISO Bezeichnung TC.. 1102.. ), rechte Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl ohne Kühlkanalbohrung, 10 mm Durchmesser x 100 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"CZ","a":[],"f":[[0,"6756911"],[7,"1"],[14,"STFC(RL) INT"],[16,"S10H-STFCR 11"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602922779"],[21,"50.0"],[22,"142.0"],[23,"50.0"],[24,"78.5"],[48,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[73,"11"],[138,"10.0"],[211,"100.0"],[214,"7.0"],[227,"-10.0"],[249,"13.0"],[256,"0.0"],[281,"9.0"],[285,"9.5"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[["3d",6]]},"483399":{"c":"A20S-STFCR 11-A","s":["A20S-STFCR 11-A Internal turning tool. Steel body. Boring operations. Longitudinal turning. Side and end cutting capability. Suitable for machining with and without shoulder. For general internal machining applications.","A20S-STFCR 11-A Outil de tournage interne. Corps en acier. Opérations d'alésage. Tournage longitudinal. Capacité de coupe latérale et frontale. Convient pour l'usinage avec ou sans épaulement. Pour les applications générales d'usinage interne.","A20S-STFCR 11-A Innen-Drehwerkzeug. Stahlkörper. Bohrvorgänge. Längsdrehen. Seitliche und stirnseitige Schneidfähigkeit. Geeignet für die Bearbeitung mit und ohne Schulter. Für allgemeine Innenbearbeitungsanwendungen."],"o":"CZ","a":[],"f":[[0,"8998329"],[7,"1"],[14,"STFC(RL) INT"],[16,"A20S-STFCR 11-A"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604794114"],[21,"26.0"],[22,"250.0"],[23,"26.0"],[24,"504.0"],[48,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[73,"11"],[138,"20.0"],[211,"250.0"],[214,"13.0"],[227,"-3.0"],[249,"25.0"],[256,"0.0"],[281,"18.0"],[313,"91.0"]],"m":[["dimensions",0],["application",1]],"d":[["2d",7],["3d",8]]},"483400":{"c":"S12K-STFCR 11","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 6.35 mm, 2.38 mm thick (ISO designation TC.. 1102.. ), right hand 90° end cutting with off-set shank, steel without coolant hole, 12 mm diameter x 125 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur (désignation ISO TC.. 1102.. ), à droite coupe en bout à 90° avec queue décalée acier sans arrosage centralisé, 12 mm diamètre x 125 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick (ISO Bezeichnung TC.. 1102.. ), rechte Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl ohne Kühlkanalbohrung, 12 mm Durchmesser x 125 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"CZ","a":[],"f":[[0,"6757052"],[7,"1"],[14,"STFC(RL) INT"],[16,"S12K-STFCR 11"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602924186"],[21,"50.0"],[22,"142.0"],[23,"50.0"],[24,"125.9"],[48,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[73,"11"],[138,"12.0"],[211,"125.0"],[214,"9.0"],[227,"-7.0"],[249,"16.0"],[256,"0.0"],[281,"11.0"],[285,"11.5"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[["3d",9]]},"483401":{"c":"S16M-STFCR 11","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 6.35 mm, 2.38 mm thick (ISO designation TC.. 1102.. ), right hand 90° end cutting with off-set shank, steel without coolant hole, 16 mm diameter x 150 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur (désignation ISO TC.. 1102.. ), à droite coupe en bout à 90° avec queue décalée acier sans arrosage centralisé, 16 mm diamètre x 150 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick (ISO Bezeichnung TC.. 1102.. ), rechte Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl ohne Kühlkanalbohrung, 16 mm Durchmesser x 150 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"CZ","a":[],"f":[[0,"6756913"],[7,"1"],[14,"STFC(RL) INT"],[16,"S16M-STFCR 11"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602922793"],[21,"50.0"],[22,"172.0"],[23,"50.0"],[24,"240.0"],[48,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[73,"11"],[138,"16.0"],[211,"150.0"],[214,"11.0"],[227,"-7.0"],[249,"20.0"],[256,"0.0"],[281,"14.5"],[285,"15.0"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[["3d",10]]},"483402":{"c":"A25T-STFCR 16","s":["A25T-STFCR 16 Internal turning tool. Steel body. Boring operations. Longitudinal turning. Side and end cutting capability. Suitable for machining with and without shoulder. For general internal machining applications.","A25T-STFCR 16 Outil de tournage interne. Corps en acier. Opérations d'alésage. Tournage longitudinal. Capacité de coupe latérale et frontale. Convient pour l'usinage avec ou sans épaulement. Pour les applications générales d'usinage interne.","A25T-STFCR 16 Innen-Drehwerkzeug. Stahlkörper. Bohrvorgänge. Längsdrehen. Seitliche und stirnseitige Schneidfähigkeit. Geeignet für die Bearbeitung mit und ohne Schulter. Für allgemeine Innenbearbeitungsanwendungen."],"o":"CZ","a":[],"f":[[0,"8923004"],[7,"1"],[14,"STFC(RL) INT"],[16,"A25T-STFCR 16"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604720458"],[21,"32.0"],[22,"300.0"],[23,"32.0"],[24,"903.0"],[48,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[73,"16"],[138,"25.0"],[211,"300.0"],[214,"17.0"],[227,"-3.0"],[249,"32.0"],[256,"0.0"],[281,"23.0"],[313,"91.0"]],"m":[["dimensions",0],["application",1]],"d":[["2d",11],["3d",12]]},"483403":{"c":"S20Q-STFCR 11","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 6.35 mm, 2.38 mm thick (ISO designation TC.. 1102.. ), right hand 90° end cutting with off-set shank, steel without coolant hole, 20 mm diameter x 180 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur (désignation ISO TC.. 1102.. ), à droite coupe en bout à 90° avec queue décalée acier sans arrosage centralisé, 20 mm diamètre x 180 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick (ISO Bezeichnung TC.. 1102.. ), rechte Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl ohne Kühlkanalbohrung, 20 mm Durchmesser x 180 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"CZ","a":[],"f":[[0,"6756894"],[7,"1"],[14,"STFC(RL) INT"],[16,"S20Q-STFCR 11"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602922601"],[21,"50.0"],[22,"210.0"],[23,"50.0"],[24,"400.0"],[48,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[73,"11"],[138,"20.0"],[211,"180.0"],[214,"13.0"],[227,"-7.0"],[249,"25.0"],[256,"0.0"],[281,"18.0"],[285,"18.5"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[["3d",13]]},"483404":{"c":"A32T-STFCR 16","s":["A32T-STFCR 16 Internal turning tool. Steel body. Boring operations. Longitudinal turning. Side and end cutting capability. Suitable for machining with and without shoulder. For general internal machining applications.","A32T-STFCR 16 Outil de tournage interne. Corps en acier. Opérations d'alésage. Tournage longitudinal. Capacité de coupe latérale et frontale. Convient pour l'usinage avec ou sans épaulement. Pour les applications générales d'usinage interne.","A32T-STFCR 16 Innen-Drehwerkzeug. Stahlkörper. Bohrvorgänge. Längsdrehen. Seitliche und stirnseitige Schneidfähigkeit. Geeignet für die Bearbeitung mit und ohne Schulter. Für allgemeine Innenbearbeitungsanwendungen."],"o":"CZ","a":[],"f":[[0,"8923006"],[7,"1"],[14,"STFC(RL) INT"],[16,"A32T-STFCR 16"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604720472"],[21,"45.0"],[22,"300.0"],[23,"45.0"],[24,"1585.0"],[48,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[73,"16"],[138,"32.0"],[211,"300.0"],[214,"22.0"],[227,"-8.0"],[249,"40.0"],[256,"0.0"],[281,"30.0"],[313,"91.0"]],"m":[["dimensions",0],["application",1]],"d":[["2d",14],["3d",15]]},"483405":{"c":"S25T-STFCR 16","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 9.525 mm, 3.97 mm thick (ISO designation TC.. 16T3.. ), right hand 90° end cutting with off-set shank, steel without coolant hole, 25 mm diameter x 300 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur (désignation ISO TC.. 16T3.. ), à droite coupe en bout à 90° avec queue décalée acier sans arrosage centralisé, 25 mm diamètre x 300 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick (ISO Bezeichnung TC.. 16T3.. ), rechte Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl ohne Kühlkanalbohrung, 25 mm Durchmesser x 300 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"CZ","a":[],"f":[[0,"6757110"],[7,"1"],[14,"STFC(RL) INT"],[16,"S25T-STFCR 16"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602924766"],[21,"55.0"],[22,"320.0"],[23,"55.0"],[24,"1081.3"],[48,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[73,"16"],[138,"25.0"],[211,"300.0"],[214,"17.0"],[227,"-3.0"],[249,"32.0"],[256,"0.0"],[281,"23.0"],[285,"23.0"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[["3d",16]]},"483406":{"c":"S32U-STFCR 16-A","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 9.525 mm, 3.97 mm thick (ISO designation TC.. 16T3.. ), right hand 90° end cutting with off-set shank, steel without coolant hole, 32 mm diameter x 350 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur (désignation ISO TC.. 16T3.. ), à droite coupe en bout à 90° avec queue décalée acier sans arrosage centralisé, 32 mm diamètre x 350 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick (ISO Bezeichnung TC.. 16T3.. ), rechte Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl ohne Kühlkanalbohrung, 32 mm Durchmesser x 350 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"CZ","a":[],"f":[[0,"6756657"],[7,"1"],[14,"STFC(RL) INT"],[16,"S32U-STFCR 16-A"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602920232"],[21,"80.0"],[22,"360.0"],[23,"80.0"],[24,"2100.0"],[48,"Right","Rechts","A droite","Rechts"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[73,"16"],[138,"32.0"],[211,"350.0"],[214,"22.0"],[227,"-10.0"],[249,"40.0"],[256,"0.0"],[281,"30.0"],[285,"30.0"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[["3d",17]]},"483407":{"c":"A12M-STFCL 11-A","s":["A12M-STFCL 11-A Internal turning tool. Steel body. Boring operations. Longitudinal turning. Side and end cutting capability. Suitable for machining with and without shoulder. For general internal machining applications.","A12M-STFCL 11-A Outil de tournage interne. Corps en acier. Opérations d'alésage. Tournage longitudinal. Capacité de coupe latérale et frontale. Convient pour l'usinage avec ou sans épaulement. Pour les applications générales d'usinage interne.","A12M-STFCL 11-A Innen-Drehwerkzeug. Stahlkörper. Bohrvorgänge. Längsdrehen. Seitliche und stirnseitige Schneidfähigkeit. Geeignet für die Bearbeitung mit und ohne Schulter. Für allgemeine Innenbearbeitungsanwendungen."],"o":"CZ","a":[],"f":[[0,"8998324"],[7,"1"],[14,"STFC(RL) INT"],[16,"A12M-STFCL 11-A"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604794060"],[21,"22.0"],[22,"150.0"],[23,"22.0"],[24,"115.5"],[48,"Left","Links","À gauche","Links"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[73,"11"],[138,"12.0"],[211,"150.0"],[214,"9.0"],[227,"-7.0"],[249,"16.0"],[256,"0.0"],[281,"11.0"],[313,"91.0"]],"m":[["dimensions",0],["application",1]],"d":[["2d",18],["3d",19]]},"483408":{"c":"A16R-STFCL 11-A","s":["A16R-STFCL 11-A Internal turning tool. Steel body. Boring operations. Longitudinal turning. Side and end cutting capability. Suitable for machining with and without shoulder. For general internal machining applications.","A16R-STFCL 11-A Outil de tournage interne. Corps en acier. Opérations d'alésage. Tournage longitudinal. Capacité de coupe latérale et frontale. Convient pour l'usinage avec ou sans épaulement. Pour les applications générales d'usinage interne.","A16R-STFCL 11-A Innen-Drehwerkzeug. Stahlkörper. Bohrvorgänge. Längsdrehen. Seitliche und stirnseitige Schneidfähigkeit. Geeignet für die Bearbeitung mit und ohne Schulter. Für allgemeine Innenbearbeitungsanwendungen."],"o":"CZ","a":[],"f":[[0,"8998326"],[7,"1"],[14,"STFC(RL) INT"],[16,"A16R-STFCL 11-A"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604794084"],[21,"26.0"],[22,"200.0"],[23,"26.0"],[24,"283.0"],[48,"Left","Links","À gauche","Links"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[73,"11"],[138,"16.0"],[211,"200.0"],[214,"11.0"],[227,"-4.0"],[249,"20.0"],[256,"0.0"],[281,"15.0"],[313,"91.0"]],"m":[["dimensions",0],["application",1]],"d":[["2d",20],["3d",21]]},"483409":{"c":"A10K-STFCL 09","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 5.56 mm, 2.38 mm thick (ISO designation TC.. 0902.. ), left hand 90° end cutting with off-set shank, steel with coolant hole, 10 mm diameter x 125 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 5.56 mm, 2.38 mm d'épaisseur (désignation ISO TC.. 0902.. ), à gauche coupe en bout à 90° avec queue décalée acier avec arrosage centralisé, 10 mm diamètre x 125 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 5.56 mm, 2.38 mm Dick (ISO Bezeichnung TC.. 0902.. ), linke Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl mit Kühlkanalbohrung, 10 mm Durchmesser x 125 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"SE","a":[],"f":[[0,"6760915"],[7,"1"],[14,"STFC(RL) INT"],[16,"A10K-STFCL 09"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602962614"],[21,"50.0"],[22,"172.0"],[23,"50.0"],[24,"60.0"],[48,"Left","Links","À gauche","Links"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[73,"09"],[138,"10.0"],[211,"125.0"],[214,"7.0"],[227,"-9.0"],[249,"13.0"],[256,"0.0"],[281,"9.0"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[]},"483410":{"c":"A12M-STFCL 09","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 5.56 mm, 2.38 mm thick (ISO designation TC.. 0902.. ), left hand 90° end cutting with off-set shank, steel with coolant hole, 12 mm diameter x 150 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 5.56 mm, 2.38 mm d'épaisseur (désignation ISO TC.. 0902.. ), à gauche coupe en bout à 90° avec queue décalée acier avec arrosage centralisé, 12 mm diamètre x 150 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 5.56 mm, 2.38 mm Dick (ISO Bezeichnung TC.. 0902.. ), linke Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl mit Kühlkanalbohrung, 12 mm Durchmesser x 150 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"SE","a":[],"f":[[0,"6760917"],[7,"1"],[14,"STFC(RL) INT"],[16,"A12M-STFCL 09"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602962638"],[21,"50.0"],[22,"172.0"],[23,"50.0"],[24,"30.0"],[48,"Left","Links","À gauche","Links"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[73,"09"],[138,"12.0"],[211,"150.0"],[214,"9.0"],[227,"-6.5"],[249,"16.0"],[256,"0.0"],[281,"11.0"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[]},"483411":{"c":"A20S-STFCL 11-A","s":["A20S-STFCL 11-A Internal turning tool. Steel body. Boring operations. Longitudinal turning. Side and end cutting capability. Suitable for machining with and without shoulder. For general internal machining applications.","A20S-STFCL 11-A Outil de tournage interne. Corps en acier. Opérations d'alésage. Tournage longitudinal. Capacité de coupe latérale et frontale. Convient pour l'usinage avec ou sans épaulement. Pour les applications générales d'usinage interne.","A20S-STFCL 11-A Innen-Drehwerkzeug. Stahlkörper. Bohrvorgänge. Längsdrehen. Seitliche und stirnseitige Schneidfähigkeit. Geeignet für die Bearbeitung mit und ohne Schulter. Für allgemeine Innenbearbeitungsanwendungen."],"o":"CZ","a":[],"f":[[0,"8998328"],[7,"1"],[14,"STFC(RL) INT"],[16,"A20S-STFCL 11-A"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604794107"],[21,"26.0"],[22,"250.0"],[23,"26.0"],[24,"499.0"],[48,"Left","Links","À gauche","Links"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[73,"11"],[138,"20.0"],[211,"250.0"],[214,"13.0"],[227,"-3.0"],[249,"25.0"],[256,"0.0"],[281,"18.0"],[313,"91.0"]],"m":[["dimensions",0],["application",1]],"d":[["2d",22],["3d",23]]},"483412":{"c":"S10H-STFCL 11","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 6.35 mm, 2.38 mm thick (ISO designation TC.. 1102.. ), left hand 90° end cutting with off-set shank, steel without coolant hole, 10 mm diameter x 100 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur (désignation ISO TC.. 1102.. ), à gauche coupe en bout à 90° avec queue décalée acier sans arrosage centralisé, 10 mm diamètre x 100 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick (ISO Bezeichnung TC.. 1102.. ), linke Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl ohne Kühlkanalbohrung, 10 mm Durchmesser x 100 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"CZ","a":[],"f":[[0,"6756858"],[7,"1"],[14,"STFC(RL) INT"],[16,"S10H-STFCL 11"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602922243"],[21,"50.0"],[22,"142.0"],[23,"50.0"],[24,"60.0"],[48,"Left","Links","À gauche","Links"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[73,"11"],[138,"10.0"],[211,"100.0"],[214,"7.0"],[227,"-10.0"],[249,"13.0"],[256,"0.0"],[281,"9.0"],[285,"9.5"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[["3d",24]]},"483413":{"c":"S12K-STFCL 11","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 6.35 mm, 2.38 mm thick (ISO designation TC.. 1102.. ), left hand 90° end cutting with off-set shank, steel without coolant hole, 12 mm diameter x 125 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur (désignation ISO TC.. 1102.. ), à gauche coupe en bout à 90° avec queue décalée acier sans arrosage centralisé, 12 mm diamètre x 125 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick (ISO Bezeichnung TC.. 1102.. ), linke Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl ohne Kühlkanalbohrung, 12 mm Durchmesser x 125 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"CZ","a":[],"f":[[0,"6757091"],[7,"1"],[14,"STFC(RL) INT"],[16,"S12K-STFCL 11"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602924575"],[21,"50.0"],[22,"142.0"],[23,"50.0"],[24,"118.0"],[48,"Left","Links","À gauche","Links"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[73,"11"],[138,"12.0"],[211,"125.0"],[214,"9.0"],[227,"-7.0"],[249,"16.0"],[256,"0.0"],[281,"11.0"],[285,"11.5"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[["3d",25]]},"483414":{"c":"A25T-STFCL 16","s":["A25T-STFCL 16 Internal turning tool. Steel body. Boring operations. Longitudinal turning. Side and end cutting capability. Suitable for machining with and without shoulder. For general internal machining applications.","A25T-STFCL 16 Outil de tournage interne. Corps en acier. Opérations d'alésage. Tournage longitudinal. Capacité de coupe latérale et frontale. Convient pour l'usinage avec ou sans épaulement. Pour les applications générales d'usinage interne.","A25T-STFCL 16 Innen-Drehwerkzeug. Stahlkörper. Bohrvorgänge. Längsdrehen. Seitliche und stirnseitige Schneidfähigkeit. Geeignet für die Bearbeitung mit und ohne Schulter. Für allgemeine Innenbearbeitungsanwendungen."],"o":"CZ","a":[],"f":[[0,"8923003"],[7,"1"],[14,"STFC(RL) INT"],[16,"A25T-STFCL 16"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604720441"],[21,"32.0"],[22,"300.0"],[23,"32.0"],[24,"903.0"],[48,"Left","Links","À gauche","Links"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[73,"16"],[138,"25.0"],[211,"300.0"],[214,"17.0"],[227,"-3.0"],[249,"32.0"],[256,"0.0"],[281,"23.0"],[313,"91.0"]],"m":[["dimensions",0],["application",1]],"d":[["2d",26],["3d",27]]},"483415":{"c":"S16M-STFCL 11","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 6.35 mm, 2.38 mm thick (ISO designation TC.. 1102.. ), left hand 90° end cutting with off-set shank, steel without coolant hole, 16 mm diameter x 150 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur (désignation ISO TC.. 1102.. ), à gauche coupe en bout à 90° avec queue décalée acier sans arrosage centralisé, 16 mm diamètre x 150 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick (ISO Bezeichnung TC.. 1102.. ), linke Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl ohne Kühlkanalbohrung, 16 mm Durchmesser x 150 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"CZ","a":[],"f":[[0,"6757227"],[7,"1"],[14,"STFC(RL) INT"],[16,"S16M-STFCL 11"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602925831"],[21,"50.0"],[22,"172.0"],[23,"50.0"],[24,"245.0"],[48,"Left","Links","À gauche","Links"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[73,"11"],[138,"16.0"],[211,"150.0"],[214,"11.0"],[227,"-7.0"],[249,"20.0"],[256,"0.0"],[281,"14.5"],[285,"15.0"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[["3d",28]]},"483416":{"c":"A32T-STFCL 16","s":["A32T-STFCL 16 Internal turning tool. Steel body. Boring operations. Longitudinal turning. Side and end cutting capability. Suitable for machining with and without shoulder. For general internal machining applications.","A32T-STFCL 16 Outil de tournage interne. Corps en acier. Opérations d'alésage. Tournage longitudinal. Capacité de coupe latérale et frontale. Convient pour l'usinage avec ou sans épaulement. Pour les applications générales d'usinage interne.","A32T-STFCL 16 Innen-Drehwerkzeug. Stahlkörper. Bohrvorgänge. Längsdrehen. Seitliche und stirnseitige Schneidfähigkeit. Geeignet für die Bearbeitung mit und ohne Schulter. Für allgemeine Innenbearbeitungsanwendungen."],"o":"CZ","a":[],"f":[[0,"8923005"],[7,"1"],[14,"STFC(RL) INT"],[16,"A32T-STFCL 16"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604720465"],[21,"45.0"],[22,"300.0"],[23,"45.0"],[24,"1585.0"],[48,"Left","Links","À gauche","Links"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[59,"Yes","Ja","Oui","Ja"],[73,"16"],[138,"32.0"],[211,"300.0"],[214,"22.0"],[227,"-8.0"],[249,"40.0"],[256,"0.0"],[281,"30.0"],[313,"91.0"]],"m":[["dimensions",0],["application",1]],"d":[["2d",29],["3d",30]]},"483417":{"c":"S25T-STFCL 16","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 9.525 mm, 3.97 mm thick (ISO designation TC.. 16T3.. ), left hand 90° end cutting with off-set shank, steel without coolant hole, 25 mm diameter x 300 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur (désignation ISO TC.. 16T3.. ), à gauche coupe en bout à 90° avec queue décalée acier sans arrosage centralisé, 25 mm diamètre x 300 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick (ISO Bezeichnung TC.. 16T3.. ), linke Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl ohne Kühlkanalbohrung, 25 mm Durchmesser x 300 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"CZ","a":[],"f":[[0,"6757011"],[7,"1"],[14,"STFC(RL) INT"],[16,"S25T-STFCL 16"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602923776"],[21,"55.0"],[22,"320.0"],[23,"55.0"],[24,"1081.6"],[48,"Left","Links","À gauche","Links"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[73,"16"],[138,"25.0"],[211,"300.0"],[214,"17.0"],[227,"-3.0"],[249,"32.0"],[256,"0.0"],[281,"23.0"],[285,"23.0"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[["3d",31]]},"483418":{"c":"S32U-STFCL 16-A","s":["Screw clamp boring bar for holding a triangular positive insert with an inscribed circle diameter of 9.525 mm, 3.97 mm thick (ISO designation TC.. 16T3.. ), left hand 90° end cutting with off-set shank, steel without coolant hole, 32 mm diameter x 350 mm long for taper boring and longitudinal boring with and without shoulder","Barre d'alésage à serrage par vis pour tenir une triangulaire positive plaquette avec un cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur (désignation ISO TC.. 16T3.. ), à gauche coupe en bout à 90° avec queue décalée acier sans arrosage centralisé, 32 mm diamètre x 350 mm de long pour alésage conique et alésage avec et sans épaulement","Dreh-Bohrstange mit Schraubklemmung zum spannen von Triangular positive Wendeschneidplatten mit einem Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick (ISO Bezeichnung TC.. 16T3.. ), linke Ausführung zum 90° Längsdrehen mit abgesetzem Schaft, Stahl ohne Kühlkanalbohrung, 32 mm Durchmesser x 350 mm Länge für Innenkegeldrehen und Längsdrehen mit und ohne Schulter"],"o":"CZ","a":[],"f":[[0,"6756656"],[7,"1"],[14,"STFC(RL) INT"],[16,"S32U-STFCL 16-A"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602920225"],[21,"80.0"],[22,"360.0"],[23,"80.0"],[24,"2060.0"],[48,"Left","Links","À gauche","Links"],[57,"Screw clamping through hole",null,"S - Serrage par vis à travers le trou","S - Schraubklemmung durch Bohrung"],[73,"16"],[138,"32.0"],[211,"350.0"],[214,"22.0"],[227,"-10.0"],[249,"40.0"],[256,"0.0"],[281,"30.0"],[285,"30.0"],[313,"90.0"]],"m":[["dimensions",0],["application",1]],"d":[["3d",32]]}}}

Aan winkelmandje toevoegen

Toevoegen aan verlanglijst

Algemene B2B-verkoopvoorwaarden
B2B-retourbeleid

Specificaties

Bestelcode (DP)

A10K-STFCR 09, A12M-STFCR 11-A, A16R-STFCR 11-A, A12M-STFCR 09, S10H-STFCR 11, A20S-STFCR 11-A, S12K-STFCR 11, S16M-STFCR 11, A25T-STFCR 16, S20Q-STFCR 11, A32T-STFCR 16, S25T-STFCR 16, S32U-STFCR 16-A, A12M-STFCL 11-A, A16R-STFCL 11-A, A10K-STFCL 09, A12M-STFCL 09, A20S-STFCL 11-A, S10H-STFCL 11, S12K-STFCL 11, A25T-STFCL 16, S16M-STFCL 11, A32T-STFCL 16, S25T-STFCL 16, S32U-STFCL 16-A