TCGT Draaiwisselplaat - positief

Name: TCGT Draaiwisselplaat - positief
SKU: TCGT 06T102E-FF2:T8430
Price: 8.68 EUR
Availability: InStock

PRAMET Tsjechië

8,68 €

excl. BTW

Productinformatie

Draaiwisselplaat - Positief

Uitvoering (DP)

Verpakking
- ST
- 10 Units

{"v":1,"a":["https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/TCGT_DIM.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/AL_POS_PROF.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/SI_POS_PROF.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/FF2_POS_PROF.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/NF1_POS_PROF.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/SF3_POS_PROF.png"],"p":{"477411":{"c":"TCGT 090202F-AL:HF7","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 5.56 mm, 2.38 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range N10 -N25, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 5.56 mm, 2.38 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins HF7, non-revêtu dans la plage ISO N10 -N25, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 5.56 mm, 2.38 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat HF7, unbeschichtet WC-Co Feinkornsubstrat im ISO-Bereich N10 -N25, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6751860"],[7,"10"],[14,"TCGT"],[16,"TCGT 1.81.50.5F-AL:HF7"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602872265"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"0.892"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"HF7"],[73,"09"],[74,"02"],[84,"TC"],[158,"0.2"],[174,"9.6"],[181,"3.0"],[183,"0.3"],[207,"2.5"],[228,"5.56"],[235,"2.38"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979325]},"477412":{"c":"TCGT 090202F-AL:T0315","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 5.56 mm, 2.38 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade T0315, a PVD coated fine grained WC-Co carbide within ISO range N05 -N20, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 5.56 mm, 2.38 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins T0315, revêtu PVD dans la plage ISO N05 -N20, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 5.56 mm, 2.38 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat T0315, PVD beschichtet WC-Co Feinkornsubstrat im ISO-Bereich N05 -N20, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6756153"],[7,"10"],[14,"TCGT"],[16,"TCGT 1.81.50.5F-AL:T0315"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602915191"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"0.892"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"T0315"],[73,"09"],[74,"02"],[84,"TC"],[158,"0.2"],[174,"9.6"],[181,"3.0"],[183,"0.3"],[207,"2.5"],[228,"5.56"],[235,"2.38"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979326]},"477413":{"c":"TCGT 090204F-AL:HF7","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 5.56 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range N10 -N25, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 5.56 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins HF7, non-revêtu dans la plage ISO N10 -N25, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 5.56 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat HF7, unbeschichtet WC-Co Feinkornsubstrat im ISO-Bereich N10 -N25, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6751861"],[7,"10"],[14,"TCGT"],[16,"TCGT 1.81.51F-AL:HF7"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602872272"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"0.892"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"HF7"],[73,"09"],[74,"02"],[84,"TC"],[158,"0.4"],[174,"9.6"],[181,"3.0"],[183,"0.4"],[207,"2.5"],[228,"5.56"],[235,"2.38"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979327]},"477414":{"c":"TCGT 090204F-AL:T0315","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 5.56 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade T0315, a PVD coated fine grained WC-Co carbide within ISO range N05 -N20, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 5.56 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins T0315, revêtu PVD dans la plage ISO N05 -N20, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 5.56 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat T0315, PVD beschichtet WC-Co Feinkornsubstrat im ISO-Bereich N05 -N20, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6756154"],[7,"10"],[14,"TCGT"],[16,"TCGT 1.81.51F-AL:T0315"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602915207"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"0.892"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"T0315"],[73,"09"],[74,"02"],[84,"TC"],[158,"0.4"],[174,"9.6"],[181,"3.0"],[183,"0.4"],[207,"2.5"],[228,"5.56"],[235,"2.38"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979328]},"477419":{"c":"TCGT 110202F-AL:HF7","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range N10 -N25, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins HF7, non-revêtu dans la plage ISO N10 -N25, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat HF7, unbeschichtet WC-Co Feinkornsubstrat im ISO-Bereich N10 -N25, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6751862"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.50.5F-AL:HF7"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602872289"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.524"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"HF7"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.2"],[174,"11.0"],[181,"3.6"],[183,"0.3"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979333]},"477420":{"c":"TCGT 110202F-AL:T0315","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade T0315, a PVD coated fine grained WC-Co carbide within ISO range N05 -N20, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins T0315, revêtu PVD dans la plage ISO N05 -N20, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat T0315, PVD beschichtet WC-Co Feinkornsubstrat im ISO-Bereich N05 -N20, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6756155"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.50.5F-AL:T0315"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602915214"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.524"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"T0315"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.2"],[174,"11.0"],[181,"3.6"],[183,"0.3"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979334]},"477428":{"c":"TCGT 110204F-AL:HF7","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range N10 -N25, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins HF7, non-revêtu dans la plage ISO N10 -N25, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat HF7, unbeschichtet WC-Co Feinkornsubstrat im ISO-Bereich N10 -N25, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6751863"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.51F-AL:HF7"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602872296"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"2.3"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"HF7"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.4"],[174,"11.0"],[181,"3.6"],[183,"0.4"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979342]},"477429":{"c":"TCGT 110204F-AL:T0315","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade T0315, a PVD coated fine grained WC-Co carbide within ISO range N05 -N20, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins T0315, revêtu PVD dans la plage ISO N05 -N20, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat T0315, PVD beschichtet WC-Co Feinkornsubstrat im ISO-Bereich N05 -N20, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6756156"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.51F-AL:T0315"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602915221"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"2.713"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"T0315"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.4"],[174,"11.0"],[181,"3.6"],[183,"0.4"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979343]},"477430":{"c":"TCGT 110208F-AL:HF7","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range N10 -N25, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins HF7, non-revêtu dans la plage ISO N10 -N25, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat HF7, unbeschichtet WC-Co Feinkornsubstrat im ISO-Bereich N10 -N25, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6751864"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.52F-AL:HF7"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602872302"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.548"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"HF7"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.8"],[174,"11.0"],[181,"3.6"],[183,"0.8"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979344]},"477401":{"c":"TCGT 16T304F-AL:HF7","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range N10 -N25, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins HF7, non-revêtu dans la plage ISO N10 -N25, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat HF7, unbeschichtet WC-Co Feinkornsubstrat im ISO-Bereich N10 -N25, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6751803"],[7,"10"],[14,"TCGT"],[16,"TCGT 32.51F-AL:HF7"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602871695"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"5.11"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"HF7"],[73,"16"],[74,"T3"],[84,"TC"],[158,"0.4"],[174,"16.5"],[181,"5.3"],[183,"0.4"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979315]},"477402":{"c":"TCGT 16T304F-AL:T0315","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade T0315, a PVD coated fine grained WC-Co carbide within ISO range N05 -N20, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins T0315, revêtu PVD dans la plage ISO N05 -N20, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat T0315, PVD beschichtet WC-Co Feinkornsubstrat im ISO-Bereich N05 -N20, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6756158"],[7,"10"],[14,"TCGT"],[16,"TCGT 32.51F-AL:T0315"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602915245"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"5.11"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"T0315"],[73,"16"],[74,"T3"],[84,"TC"],[158,"0.4"],[174,"16.5"],[181,"5.3"],[183,"0.4"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979316]},"477406":{"c":"TCGT 16T308F-AL:HF7","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range N10 -N25, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins HF7, non-revêtu dans la plage ISO N10 -N25, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat HF7, unbeschichtet WC-Co Feinkornsubstrat im ISO-Bereich N10 -N25, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6751804"],[7,"10"],[14,"TCGT"],[16,"TCGT 32.52F-AL:HF7"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602871701"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"5.6"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"HF7"],[73,"16"],[74,"T3"],[84,"TC"],[158,"0.8"],[174,"16.5"],[181,"5.3"],[183,"0.8"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979320]},"477407":{"c":"TCGT 16T308F-AL:T0315","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade T0315, a PVD coated fine grained WC-Co carbide within ISO range N05 -N20, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins T0315, revêtu PVD dans la plage ISO N05 -N20, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat T0315, PVD beschichtet WC-Co Feinkornsubstrat im ISO-Bereich N05 -N20, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6756159"],[7,"10"],[14,"TCGT"],[16,"TCGT 32.52F-AL:T0315"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602915252"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"5.61"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"T0315"],[73,"16"],[74,"T3"],[84,"TC"],[158,"0.8"],[174,"16.5"],[181,"5.3"],[183,"0.8"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979321]},"477418":{"c":"TCGT 110202ER-SI:T8430","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SI with rounded cutting edges, in grade T8430, a PVD coated fine grained WC-Co carbide within ISO ranges P20 -P40 and M20 -M35, for fine to medium machining of steels and stainless-steels with a right handed turning tool","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SI avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains fins T8430, revêtu PVD dans les plages ISO P20 -P40 et M20 -M35, pour usinage fin à moyen des aciers et aciers inoxydables avec un outil de tournage à droite","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SI mit verrundeter Schneidkante, im Substrat T8430, PVD beschichtet WC-Co Feinkornsubstrat in den ISO-Bereichen P20 -P40 und M20 -M35, zum schlichten bis medium bearbeiten von Stählen und nichtrostenden Stählen mit einem rechtsschneidendem Werkzeug"],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","possible"]],"f":[[0,"7977247"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.50.5R-SI:T8430"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603818583"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.332"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SI"],[71,"T8430"],[72,"Medium"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.2"],[174,"11.0"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[979332]},"477427":{"c":"TCGT 110204ER-SI:T8430","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SI with rounded cutting edges, in grade T8430, a PVD coated fine grained WC-Co carbide within ISO ranges P20 -P40 and M20 -M35, for fine to medium machining of steels and stainless-steels with a right handed turning tool","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SI avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains fins T8430, revêtu PVD dans les plages ISO P20 -P40 et M20 -M35, pour usinage fin à moyen des aciers et aciers inoxydables avec un outil de tournage à droite","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SI mit verrundeter Schneidkante, im Substrat T8430, PVD beschichtet WC-Co Feinkornsubstrat in den ISO-Bereichen P20 -P40 und M20 -M35, zum schlichten bis medium bearbeiten von Stählen und nichtrostenden Stählen mit einem rechtsschneidendem Werkzeug"],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","possible"]],"f":[[0,"7977249"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.51R-SI:T8430"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603818606"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.654"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SI"],[71,"T8430"],[72,"Medium"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.4"],[174,"11.0"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[979341]},"477396":{"c":"TCGT 06T102E-FF2:T8430","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 3.97 mm, 1.98 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker FF2 with rounded cutting edges, in grade T8430, a PVD coated fine grained WC-Co carbide within ISO range P20 -P40, for fine to medium machining of steels","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 3.97 mm, 1.98 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux FF2 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains fins T8430, revêtu PVD dans la plage ISO P20 -P40, pour usinage fin à moyen des aciers","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 3.97 mm, 1.98 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher FF2 mit verrundeter Schneidkante, im Substrat T8430, PVD beschichtet WC-Co Feinkornsubstrat im ISO-Bereich P20 -P40, zum schlichten bis medium bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"],["K","possible"]],"f":[[0,"7977246"],[7,"10"],[14,"TCGT"],[16,"TCGT 1.21.20.5-FF2:T8430"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603818576"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"0.395"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"FF2"],[71,"T8430"],[72,"Fine-finishing"],[73,"06"],[74,"T1"],[84,"TC"],[158,"0.2"],[174,"6.9"],[207,"2.2"],[228,"3.97"],[235,"1.98"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[979310]},"477397":{"c":"TCGT 06T102E-FF2:TT010","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 3.97 mm, 1.98 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker FF2 with rounded cutting edges, in grade TT010, an uncoated cermet within ISO range P01 -P10, for fine to medium machining of steels","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 3.97 mm, 1.98 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux FF2 avec arêtes de coupe arrondies, en nuance cermet TT010, non-revêtu dans la plage ISO P01 -P10, pour usinage fin à moyen des aciers","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 3.97 mm, 1.98 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher FF2 mit verrundeter Schneidkante, im Substrat TT010, unbeschichtet Cermet im ISO-Bereich P01 -P10, zum schlichten bis medium bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"]],"f":[[0,"7080629"],[7,"10"],[14,"TCGT"],[16,"TCGT 1.21.20.5-FF2:TT010"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603129245"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"0.19"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"FF2"],[71,"TT010"],[72,"Fine-finishing"],[73,"06"],[74,"T1"],[84,"TC"],[158,"0.2"],[174,"6.9"],[181,"2.0"],[183,"0.2"],[207,"2.2"],[228,"3.97"],[235,"1.98"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[979311]},"477410":{"c":"TCGT 090202E-FF2:TT010","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 5.56 mm, 2.38 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker FF2 with rounded cutting edges, in grade TT010, an uncoated cermet within ISO range P01 -P10, for fine to medium machining of steels","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 5.56 mm, 2.38 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux FF2 avec arêtes de coupe arrondies, en nuance cermet TT010, non-revêtu dans la plage ISO P01 -P10, pour usinage fin à moyen des aciers","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 5.56 mm, 2.38 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher FF2 mit verrundeter Schneidkante, im Substrat TT010, unbeschichtet Cermet im ISO-Bereich P01 -P10, zum schlichten bis medium bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"]],"f":[[0,"7080630"],[7,"10"],[14,"TCGT"],[16,"TCGT 1.81.50.5-FF2:TT010"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603129252"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"0.507"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"FF2"],[71,"TT010"],[72,"Fine-finishing"],[73,"09"],[74,"02"],[84,"TC"],[158,"0.2"],[174,"9.6"],[181,"1.5"],[183,"0.2"],[207,"2.5"],[228,"5.56"],[235,"2.38"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[979324]},"477421":{"c":"TCGT 110204E-NF1:T6310","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker NF1 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges P01 -P15/M01 -M15 and S01 -S15, for fine to medium machining of steels, stainless-steels and super-alloys","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux NF1 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T6310, revêtu PVD dans les plages ISO P01 -P15/M01 -M15 et S01 -S15, pour usinage fin à moyen des aciers, aciers inoxydables et superalliages","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher NF1 mit verrundeter Schneidkante, im Substrat T6310, PVD beschichtet WC-Co Feinstkornsubstrat in den ISO-Bereichen P01 -P15/M01 -M15 und S01 -S15, zum schlichten bis medium bearbeiten von Stählen, nichtrostenden Stählen und Superlegierungen"],"o":"CZ","a":[["P","primary"],["M","primary"],["N","possible"],["S","primary"],["H","possible"]],"f":[[0,"7167419"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.51-NF1:T6310"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603170261"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.396"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"NF1"],[71,"T6310"],[72,"Fine-finishing"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.4"],[174,"11.0"],[181,"2.5"],[183,"0.3"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",4]],"d":[],"x":[979335]},"477415":{"c":"TCGT 110202E-SF3:T8415","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T8415.","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T8415.","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T8415."],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","possible"],["S","primary"],["H","possible"]],"f":[[0,"8553250"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.50.5-SF3:T8415"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604269759"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.292"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T8415"],[72,"Fine-finishing"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.2"],[174,"11.0"],[181,"1.6"],[183,"0.2"],[207,"2.8"],[228,"6.35"],[235,"2.58"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[979329]},"477422":{"c":"TCGT 110204E-SF3:H07","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade H07, an uncoated WC-Co carbide within ISO ranges N10 -N30 and S01 -S20, for fine to medium machining of non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co H07, non-revêtu dans les plages ISO N10 -N30 et S01 -S20, pour usinage fin à moyen des métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat H07, unbeschichtet WC-Co Substrat in den ISO-Bereichen N10 -N30 und S01 -S20, zum schlichten bis medium bearbeiten von Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"7168581"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.51-SF3:H07"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171770"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.295"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"H07"],[72,"Fine-finishing"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.4"],[174,"11.0"],[181,"2.0"],[183,"0.2"],[207,"2.8"],[228,"6.35"],[235,"2.58"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[979336]},"477423":{"c":"TCGT 110204E-SF3:T6310","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges M01 -M15/N05 -N20 and S01 -S15, for fine to medium machining of stainless-steels, non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T6310, revêtu PVD dans les plages ISO M01 -M15/N05 -N20 et S01 -S15, pour usinage fin à moyen des aciers inoxydables, métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T6310, PVD beschichtet WC-Co Feinstkornsubstrat in den ISO-Bereichen M01 -M15/N05 -N20 und S01 -S15, zum schlichten bis medium bearbeiten von nichtrostenden Stählen, Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","primary"],["S","primary"],["H","possible"]],"f":[[0,"7168582"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.51-SF3:T6310"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171787"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.276"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T6310"],[72,"Fine-finishing"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.4"],[174,"11.0"],[181,"2.0"],[183,"0.2"],[207,"2.8"],[228,"6.35"],[235,"2.58"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[979337]},"477424":{"c":"TCGT 110204E-SF3:T8415","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T8415.","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co T8415.","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T8415."],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","possible"],["S","primary"],["H","possible"]],"f":[[0,"8553252"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.51-SF3:T8415"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604269773"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.287"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T8415"],[72,"Fine-finishing"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.4"],[174,"11.0"],[181,"2.0"],[183,"0.2"],[207,"2.8"],[228,"6.35"],[235,"2.58"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[979338]},"477398":{"c":"TCGT 16T304E-SF3:H07","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade H07, an uncoated WC-Co carbide within ISO ranges N10 -N30 and S01 -S20, for fine to medium machining of non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co H07, non-revêtu dans les plages ISO N10 -N30 et S01 -S20, pour usinage fin à moyen des métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat H07, unbeschichtet WC-Co Substrat in den ISO-Bereichen N10 -N30 und S01 -S20, zum schlichten bis medium bearbeiten von Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"7168584"],[7,"10"],[14,"TCGT"],[16,"TCGT 32.51-SF3:H07"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171800"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.507"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"H07"],[72,"Fine-finishing"],[73,"16"],[74,"T3"],[84,"TC"],[158,"0.4"],[174,"16.5"],[181,"2.5"],[183,"0.2"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[979312]},"477399":{"c":"TCGT 16T304E-SF3:T6310","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges M01 -M15/N05 -N20 and S01 -S15, for fine to medium machining of stainless-steels, non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T6310, revêtu PVD dans les plages ISO M01 -M15/N05 -N20 et S01 -S15, pour usinage fin à moyen des aciers inoxydables, métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T6310, PVD beschichtet WC-Co Feinstkornsubstrat in den ISO-Bereichen M01 -M15/N05 -N20 und S01 -S15, zum schlichten bis medium bearbeiten von nichtrostenden Stählen, Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","primary"],["S","primary"],["H","possible"]],"f":[[0,"7168585"],[7,"10"],[14,"TCGT"],[16,"TCGT 32.51-SF3:T6310"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171817"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"3.361"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T6310"],[72,"Fine-finishing"],[73,"16"],[74,"T3"],[84,"TC"],[158,"0.4"],[174,"16.5"],[181,"2.5"],[183,"0.2"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[979313]},"477400":{"c":"TCGT 16T304E-SF3:T8415","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T8415.","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co T8415.","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T8415."],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","possible"],["S","primary"],["H","possible"]],"f":[[0,"8553253"],[7,"10"],[14,"TCGT"],[16,"TCGT 32.51-SF3:T8415"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604269780"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.477"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T8415"],[72,"Fine-finishing"],[73,"16"],[74,"T3"],[84,"TC"],[158,"0.4"],[174,"16.5"],[181,"2.5"],[183,"0.2"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[979314]},"477403":{"c":"TCGT 16T308E-SF3:H07","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade H07, an uncoated WC-Co carbide within ISO ranges N10 -N30 and S01 -S20, for fine to medium machining of non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co H07, non-revêtu dans les plages ISO N10 -N30 et S01 -S20, pour usinage fin à moyen des métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat H07, unbeschichtet WC-Co Substrat in den ISO-Bereichen N10 -N30 und S01 -S20, zum schlichten bis medium bearbeiten von Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"7168587"],[7,"10"],[14,"TCGT"],[16,"TCGT 32.52-SF3:H07"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171831"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.484"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"H07"],[72,"Fine-finishing"],[73,"16"],[74,"T3"],[84,"TC"],[158,"0.8"],[174,"16.5"],[181,"3.2"],[183,"0.6"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[979317]},"477404":{"c":"TCGT 16T308E-SF3:T6310","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges M01 -M15/N05 -N20 and S01 -S15, for fine to medium machining of stainless-steels, non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T6310, revêtu PVD dans les plages ISO M01 -M15/N05 -N20 et S01 -S15, pour usinage fin à moyen des aciers inoxydables, métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T6310, PVD beschichtet WC-Co Feinstkornsubstrat in den ISO-Bereichen M01 -M15/N05 -N20 und S01 -S15, zum schlichten bis medium bearbeiten von nichtrostenden Stählen, Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","primary"],["S","primary"],["H","possible"]],"f":[[0,"7168588"],[7,"10"],[14,"TCGT"],[16,"TCGT 32.52-SF3:T6310"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171848"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.418"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T6310"],[72,"Fine-finishing"],[73,"16"],[74,"T3"],[84,"TC"],[158,"0.8"],[174,"16.5"],[181,"3.2"],[183,"0.6"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[979318]},"477405":{"c":"TCGT 16T308E-SF3:T8415","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T8415.","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co T8415.","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T8415."],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","possible"],["S","primary"],["H","possible"]],"f":[[0,"8553254"],[7,"10"],[14,"TCGT"],[16,"TCGT 32.52-SF3:T8415"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604269797"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.454"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T8415"],[72,"Fine-finishing"],[73,"16"],[74,"T3"],[84,"TC"],[158,"0.8"],[174,"16.5"],[181,"3.2"],[183,"0.6"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[979319]},"477408":{"c":"TCGT 16T312E-SF3:T6310","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 1.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges M01 -M15/N05 -N20 and S01 -S15, for fine to medium machining of stainless-steels, non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 1.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T6310, revêtu PVD dans les plages ISO M01 -M15/N05 -N20 et S01 -S15, pour usinage fin à moyen des aciers inoxydables, métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 1.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T6310, PVD beschichtet WC-Co Feinstkornsubstrat in den ISO-Bereichen M01 -M15/N05 -N20 und S01 -S15, zum schlichten bis medium bearbeiten von nichtrostenden Stählen, Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","primary"],["S","primary"],["H","possible"]],"f":[[0,"7600317"],[7,"10"],[14,"TCGT"],[16,"TCGT 32.53-SF3:T6310"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603519077"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.346"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T6310"],[72,"Fine-finishing"],[73,"16"],[74,"T3"],[84,"TC"],[158,"1.2"],[174,"16.5"],[181,"3.5"],[183,"0.8"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[979322]},"477409":{"c":"TCGT 16T312E-SF3:T8415","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 1.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T8415.","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 1.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T8415.","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 1.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T8415."],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","possible"],["S","primary"],["H","possible"]],"f":[[0,"8553255"],[7,"10"],[14,"TCGT"],[16,"TCGT 32.53-SF3:T8415"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604269803"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.382"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T8415"],[72,"Fine-finishing"],[73,"16"],[74,"T3"],[84,"TC"],[158,"1.2"],[174,"16.5"],[181,"3.5"],[183,"0.8"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[979323]},"477416":{"c":"TCGT 110202EL-SI:T8415","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SI with rounded cutting edges, in grade T8415.","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SI avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains fins T8415.","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SI mit verrundeter Schneidkante, im Substrat T8415."],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","primary"]],"f":[[0,"8553249"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.50.5L-SI:T8415"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604269742"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.363"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SI"],[71,"T8415"],[72,"Medium"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.2"],[174,"11.0"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[979330]},"477417":{"c":"TCGT 110202EL-SI:T8430","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SI with rounded cutting edges, in grade T8430, a PVD coated fine grained WC-Co carbide within ISO ranges P20 -P40 and M20 -M35, for fine to medium machining of steels and stainless-steels with a left handed turning tool","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SI avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains fins T8430, revêtu PVD dans les plages ISO P20 -P40 et M20 -M35, pour usinage fin à moyen des aciers et aciers inoxydables avec un outil de tournage à gauche","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SI mit verrundeter Schneidkante, im Substrat T8430, PVD beschichtet WC-Co Feinkornsubstrat in den ISO-Bereichen P20 -P40 und M20 -M35, zum schlichten bis medium bearbeiten von Stählen und nichtrostenden Stählen mit einem linksschneidendem Werkzeug"],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","possible"]],"f":[[0,"7973851"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.50.5L-SI:T8430"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603814516"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.332"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SI"],[71,"T8430"],[72,"Medium"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.2"],[174,"11.0"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[979331]},"477425":{"c":"TCGT 110204EL-SI:T8415","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SI with rounded cutting edges, in grade T8415.","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SI avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains fins T8415.","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SI mit verrundeter Schneidkante, im Substrat T8415."],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","primary"]],"f":[[0,"8553251"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.51L-SI:T8415"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604269766"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.358"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SI"],[71,"T8415"],[72,"Medium"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.4"],[174,"11.0"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[979339]},"477426":{"c":"TCGT 110204EL-SI:T8430","s":["Single-sided positive turning insert, triangular with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SI with rounded cutting edges, in grade T8430, a PVD coated fine grained WC-Co carbide within ISO ranges P20 -P40 and M20 -M35, for fine to medium machining of steels and stainless-steels with a left handed turning tool","Plaquette de tournage positive non réversible, forme triangulaire avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SI avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains fins T8430, revêtu PVD dans les plages ISO P20 -P40 et M20 -M35, pour usinage fin à moyen des aciers et aciers inoxydables avec un outil de tournage à gauche","Einseitige positive Drehwendeschneidplatte, Triangular mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SI mit verrundeter Schneidkante, im Substrat T8430, PVD beschichtet WC-Co Feinkornsubstrat in den ISO-Bereichen P20 -P40 und M20 -M35, zum schlichten bis medium bearbeiten von Stählen und nichtrostenden Stählen mit einem linksschneidendem Werkzeug"],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","possible"]],"f":[[0,"7977248"],[7,"10"],[14,"TCGT"],[16,"TCGT 21.51L-SI:T8430"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603818590"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.327"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TCGT"],[68,"T"],[69,"C 7°"],[70,"SI"],[71,"T8430"],[72,"Medium"],[73,"11"],[74,"02"],[84,"TC"],[158,"0.4"],[174,"11.0"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[979340]}}}

Aan winkelmandje toevoegen

Toevoegen aan verlanglijst

Algemene voorwaarden
Zakelijke retouren uitsluitend na voorafgaande goedkeuringLevering: 3-4 werkdagen. België en Luxemburg: 1 werkdag. Neem contact op voor levertijd en beschikbaarheid.

Specificaties

Uitvoering (DP)

06T102E-FF2:T8430, 06T102E-FF2:TT010, 16T304E-SF3:H07, 16T304E-SF3:T6310, 16T304E-SF3:T8415, 16T304F-AL:HF7, 16T304F-AL:T0315, 16T308E-SF3:H07, 16T308E-SF3:T6310, 16T308E-SF3:T8415, 16T308F-AL:HF7, 16T308F-AL:T0315, 16T312E-SF3:T6310, 16T312E-SF3:T8415, 090202E-FF2:TT010, 090202F-AL:HF7, 090202F-AL:T0315, 090204F-AL:HF7, 090204F-AL:T0315, 110202E-SF3:T8415, 110202EL-SI:T8415, 110202EL-SI:T8430, 110202ER-SI:T8430, 110202F-AL:HF7, 110202F-AL:T0315, 110204E-NF1:T6310, 110204E-SF3:H07, 110204E-SF3:T6310, 110204E-SF3:T8415, 110204EL-SI:T8415, 110204EL-SI:T8430, 110204ER-SI:T8430, 110204F-AL:HF7, 110204F-AL:T0315, 110208F-AL:HF7

Alternatieve producten

Deze andere producten kunnen je interesseren

TCGT Draaiwisselplaat - positief

Productinformatie

Uitvoering (DP)

Verpakking

Specificaties

Alternatieve producten