TNMM Draaiwisselplaat - negatief

Name: TNMM Draaiwisselplaat - negatief
SKU: TNMM 160408E-NR2:T9425
Price: 9.06 EUR
Availability: InStock

PRAMET Tsjechië

9,06 €

excl. BTW

Productinformatie

Draaiwisselplaat - Negatief

Uitvoering (DP)

Verpakking
- ST
- 10 Units

{"v":1,"a":["https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/TNMM_DIM.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/HR_NEG_PROF.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/NR2_NEG_PROF.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/OR_NEG_PROF.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/RL_PROF.png"],"p":{"478015":{"c":"TNMM 270612-HR3:T7325","s":[""],"o":"CZ","a":[["P","possible"],["M","possible"]],"f":[[0,"8762801"],[7,"10"],[14,"TNMM"],[16,"TNMM 553-HR3:T7325"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604523486"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"25.2"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"HR3"],[71,"T7325"],[72,"Heavy roughing"],[73,"27"],[74,"06"],[84,"TN"]],"m":[["dimensions",0]],"d":[],"x":[979929]},"478016":{"c":"TNMM 270616-HR3:T7325","s":[""],"o":"CZ","a":[["P","possible"],["M","possible"]],"f":[[0,"8762802"],[7,"10"],[14,"TNMM"],[16,"TNMM 554-HR3:T7325"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604523493"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"25.3"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"HR3"],[71,"T7325"],[72,"Heavy roughing"],[73,"27"],[74,"06"],[84,"TN"]],"m":[["dimensions",0]],"d":[],"x":[979930]},"478020":{"c":"TNMM 270624-HR3:T7325","s":[""],"o":"CZ","a":[["P","possible"],["M","possible"]],"f":[[0,"8762803"],[7,"10"],[14,"TNMM"],[16,"TNMM 556-HR3:T7325"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604523509"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"25.3"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"HR3"],[71,"T7325"],[72,"Heavy roughing"],[73,"27"],[74,"06"],[84,"TN"]],"m":[["dimensions",0]],"d":[],"x":[979934]},"478022":{"c":"TNMM 270632-HR3:T7325","s":[""],"o":"CZ","a":[["P","possible"],["M","possible"]],"f":[[0,"8762804"],[7,"10"],[14,"TNMM"],[16,"TNMM 558-HR3:T7325"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604523516"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"24.2"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"HR3"],[71,"T7325"],[72,"Heavy roughing"],[73,"27"],[74,"06"],[84,"TN"]],"m":[["dimensions",0]],"d":[],"x":[979936]},"478017":{"c":"TNMM 270616E-HR:T9325","s":["Double-sided negative turning insert, triangular with inscribed circle diameter of 15.875 mm, 6.35 mm thick, 1.6 mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker HR with rounded cutting edges, in grade T9325, a MT-CVD coated functionally graded WC-Co carbide within ISO range P15 -P35, for heavy to extra heavy machining of steels","Plaquette de tournage négative réversible, forme triangulaire avec un diamètre de cercle inscrit de 15.875 mm, 6.35 mm d'épaisseur, rayon de pointe 1.6 mm, précision d'indexage selon la classe de tolérance ISO M, brise-copeaux HR avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T9325, revêtu MT-CVD dans la plage ISO P15 -P35, pour usinage lourd à extra lourd des aciers","Doppelseitige negative Drehwendeschneidplatte, Triangular mit Innenkreisdurchmesser von 15.875 mm, 6.35 mm Dick, 1.6 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-M, Spanbrecher HR mit verrundeter Schneidkante, im Substrat T9325, MT-CVD beschichtet functionally graded WC-Co carbide im ISO-Bereich P15 -P35, zum schruppen bis schweres schruppen bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"]],"f":[[0,"6754180"],[7,"10"],[14,"TNMM"],[16,"TNMM 544-HR:T9325"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602895462"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"23.128"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"HR"],[71,"T9325"],[72,"Heavy roughing"],[73,"27"],[74,"06"],[84,"TN"],[158,"1.6"],[174,"27.5"],[181,"8.9"],[183,"5.0"],[207,"6.35"],[228,"15.875"],[235,"6.35"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979931]},"478018":{"c":"TNMM 270616E-HR:T9335","s":["Double-sided negative turning insert, triangular with inscribed circle diameter of 15.875 mm, 6.35 mm thick, 1.6 mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker HR with rounded cutting edges, in grade T9335, a MT-CVD coated functionally graded WC-Co carbide within ISO range P20 -P45, for heavy to extra heavy machining of steels","Plaquette de tournage négative réversible, forme triangulaire avec un diamètre de cercle inscrit de 15.875 mm, 6.35 mm d'épaisseur, rayon de pointe 1.6 mm, précision d'indexage selon la classe de tolérance ISO M, brise-copeaux HR avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T9335, revêtu MT-CVD dans la plage ISO P20 -P45, pour usinage lourd à extra lourd des aciers","Doppelseitige negative Drehwendeschneidplatte, Triangular mit Innenkreisdurchmesser von 15.875 mm, 6.35 mm Dick, 1.6 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-M, Spanbrecher HR mit verrundeter Schneidkante, im Substrat T9335, MT-CVD beschichtet functionally graded WC-Co carbide im ISO-Bereich P20 -P45, zum schruppen bis schweres schruppen bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"],["M","possible"]],"f":[[0,"6754998"],[7,"10"],[14,"TNMM"],[16,"TNMM 544-HR:T9335"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602903648"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"20.125"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"HR"],[71,"T9335"],[72,"Heavy roughing"],[73,"27"],[74,"06"],[84,"TN"],[158,"1.6"],[174,"27.5"],[181,"8.9"],[183,"5.0"],[207,"6.35"],[228,"15.875"],[235,"6.35"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979932]},"478019":{"c":"TNMM 270616E-HR:T9425","s":["Single-sided Negative turning insert, T - triangular 60° included angle, size 27 with corner radius 1.6 mm. Combination of chipbreaker HR chip breaker is robust and designed for heavy roughing of Steels and Cast irons. It features slightly positive rake angle and negative/negative, extra-wide double T-land. It's also conditionally suitable for Stainless steels. and MT-CVD-coated, functionally graded substrate T9425, designed primarily for P-group materials. is suitable for materials: P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC), K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content) and Slightly interrupted cut.","Plaquette de tournage unilatérale Plaquettes négatives, T - triangulaire 60° angle inclus, taille 27 avec rayon d'angle 1.6 mm. La combinaison du brise-copeaux HR - Géométrie robuste conçue pour l'ébauche lourde des aciers et des fontes. Elle se caractérise par un angle de coupe légèrement positif et un double listel négatif extra-large. Elle convient également, sous certaines conditions, aux aciers inoxydables. et Substrat T9425 revêtu par MT-CVD, à nuance fonctionnelle, conçu principalement pour les matériaux du groupe P. convient aux matériaux : P - Acier et acier moulé (aciers avec une teneur en alliage ≤ 10 % et d'une dureté < 45 HRC), K - Fonte (fontes moulées et alliages au carbone avec une teneur en carbone > 2 %) et Coupe légèrement interrompue.","Einseitige Negativ-Drehplatte, T - dreieckiger 60° eingeschlossener Winkel, Größe 27 mit Eckenradius 1.6 mm. Die Kombination aus Spanbrecher HR Spanbrecher ist robust und für die schwere Schruppbearbeitung von Stahl und Gusseisen konzipiert. Er zeichnet sich durch einen leicht positiven Spanwinkel und eine negative/negative, extra breite Doppel-Fase aus. Er ist auch bedingt für rostfreie Stähle geeignet. und MT-CVD-beschichtetes, funktional abgestuftes Substrat T9425, das hauptsächlich für Materialien der P-Gruppe entwickelt wurde. eignet sich für Werkstoffe: P - Stahl und Stahlguss, K - Gusseisen (Gussstücke aus Eisen und Kohlenstofflegierungen mit > 2% Kohlenstoffgehalt) und Geringfügig unterbrochener Schnitt."],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"]],"f":[[0,"8985899"],[7,"10"],[14,"TNMM"],[16,"TNMM 544-HR:T9425"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604777278"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"23.128"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"HR"],[71,"T9425"],[73,"27"],[74,"06"],[84,"TN"],[158,"1.6"],[174,"27.5"],[181,"8.9"],[183,"5.0"],[207,"6.35"],[228,"15.875"],[235,"6.35"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979933]},"478021":{"c":"TNMM 270624E-HR:T9226","s":["Double-sided negative turning insert, triangular with inscribed circle diameter of 15.875 mm, 6.35 mm thick, 2.4 mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker HR with rounded cutting edges, in grade T9226, a MT-CVD coated functionally graded WC-Co carbide within ISO range P15 -P35, for heavy to extra heavy machining of steels","Plaquette de tournage négative réversible, forme triangulaire avec un diamètre de cercle inscrit de 15.875 mm, 6.35 mm d'épaisseur, rayon de pointe 2.4 mm, précision d'indexage selon la classe de tolérance ISO M, brise-copeaux HR avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T9226, revêtu MT-CVD dans la plage ISO P15 -P35, pour usinage lourd à extra lourd des aciers","Doppelseitige negative Drehwendeschneidplatte, Triangular mit Innenkreisdurchmesser von 15.875 mm, 6.35 mm Dick, 2.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-M, Spanbrecher HR mit verrundeter Schneidkante, im Substrat T9226, MT-CVD beschichtet funktionell abgestuftes WC-Co-Carbid im ISO-Bereich P15 -P35, zum schruppen bis schweres schruppen bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"]],"f":[[0,"6931891"],[7,"10"],[14,"TNMM"],[16,"TNMM 546-HR:T9226"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603079250"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"23.58"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"HR"],[71,"T9226"],[72,"Heavy roughing"],[73,"27"],[74,"06"],[84,"TN"],[158,"2.4"],[174,"27.5"],[181,"8.9"],[183,"5.0"],[207,"6.35"],[228,"15.875"],[235,"6.35"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[979935]},"477997":{"c":"TNMM 160408E-NR2:T9425","s":["Single-sided Negative turning insert, T - triangular 60° included angle, size 16 with corner radius 0.8 mm. Combination of chipbreaker NR2 chip breaker is robust and the first choice for heavy roughing of Stainless steels. It features positive rake angle and negative/negative, extra-wide double T-land. It's also suitable for Steels, and conditionally for Cast irons and Super-alloys. and MT-CVD-coated, functionally graded substrate T9425, designed primarily for P-group materials. is suitable for materials: M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content), P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC) and Slightly interrupted cut.","Plaquette de tournage unilatérale Plaquettes négatives, T - triangulaire 60° angle inclus, taille 16 avec rayon d'angle 0.8 mm. La combinaison du brise-copeaux NR2 - Géométrie robuste qui constitue le premier choix pour l'ébauche lourde des aciers inoxydables. Elle est dotée d'un angle de coupe positif et d'un double listel négatif extra-large. Elle convient également aux aciers et, sous certaines conditions, aux fontes et aux superalliages. et Substrat T9425 revêtu par MT-CVD, à nuance fonctionnelle, conçu principalement pour les matériaux du groupe P. convient aux matériaux : M - Acier inoxydable (aciers résistants à la corrosion avec une teneur en chrome ≥ 11 %), P - Acier et acier moulé (aciers avec une teneur en alliage ≤ 10 % et d'une dureté < 45 HRC) et Coupe légèrement interrompue.","Einseitige Negativ-Drehplatte, T - dreieckiger 60° eingeschlossener Winkel, Größe 16 mit Eckenradius 0.8 mm. Die Kombination aus Spanbrecher NR2 Spanbrecher ist robust und die erste Wahl für die schwere Schruppbearbeitung von rostfreien Stählen. Er verfügt über einen positiven Spanwinkel und einer negative/negative, extra breite Fase. Er ist auch für Stähle und bedingt für Gusseisen und Superlegierungen geeignet. und MT-CVD-beschichtetes, funktional abgestuftes Substrat T9425, das hauptsächlich für Materialien der P-Gruppe entwickelt wurde. eignet sich für Werkstoffe: M - Edelstahl (korrosionsbeständige Stähle mit ≥ 11 % Chromgehalt), P - Stahl und Stahlguss und Geringfügig unterbrochener Schnitt."],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","possible"]],"f":[[0,"8985891"],[7,"10"],[14,"TNMM"],[16,"TNMM 332-NR2:T9425"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604777193"],[21,"40.0"],[22,"98.0"],[23,"14.5"],[24,"6.39"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"NR2"],[71,"T9425"],[73,"16"],[74,"04"],[84,"TN"],[158,"0.8"],[174,"16.5"],[181,"5.3"],[183,"0.8"],[207,"3.81"],[228,"9.525"],[235,"4.76"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[979911]},"478001":{"c":"TNMM 220408E-NR2:T9325","s":["Double-sided negative turning insert, triangular with inscribed circle diameter of 12.7 mm, 4.76 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker NR2 with rounded cutting edges, in grade T9325, a MT-CVD coated functionally graded WC-Co carbide within ISO ranges P15 -P35 and M10 -M30, for medium to extra heavy machining of steels and stainless-steels","Plaquette de tournage négative réversible, forme triangulaire avec un diamètre de cercle inscrit de 12.7 mm, 4.76 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO M, brise-copeaux NR2 avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T9325, revêtu MT-CVD dans les plages ISO P15 -P35 et M10 -M30, pour usinage moyen à extra lourd des aciers et aciers inoxydables","Doppelseitige negative Drehwendeschneidplatte, Triangular mit Innenkreisdurchmesser von 12.7 mm, 4.76 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-M, Spanbrecher NR2 mit verrundeter Schneidkante, im Substrat T9325, MT-CVD beschichtet functionally graded WC-Co carbide in den ISO-Bereichen P15 -P35 und M10 -M30, zum medium bis schweres schruppen bearbeiten von Stählen und nichtrostenden Stählen"],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","possible"]],"f":[[0,"6754169"],[7,"10"],[14,"TNMM"],[16,"TNMM 432-NR2:T9325"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602895356"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"11.277"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"NR2"],[71,"T9325"],[72,"Heavy roughing"],[73,"22"],[74,"04"],[84,"TN"],[158,"0.8"],[174,"22.0"],[181,"7.3"],[183,"0.8"],[207,"5.16"],[228,"12.7"],[235,"4.76"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[979915]},"478002":{"c":"TNMM 220408E-NR2:T9425","s":["Single-sided Negative turning insert, T - triangular 60° included angle, size 22 with corner radius 0.8 mm. Combination of chipbreaker NR2 chip breaker is robust and the first choice for heavy roughing of Stainless steels. It features positive rake angle and negative/negative, extra-wide double T-land. It's also suitable for Steels, and conditionally for Cast irons and Super-alloys. and MT-CVD-coated, functionally graded substrate T9425, designed primarily for P-group materials. is suitable for materials: M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content), P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC) and Slightly interrupted cut.","Plaquette de tournage unilatérale Plaquettes négatives, T - triangulaire 60° angle inclus, taille 22 avec rayon d'angle 0.8 mm. La combinaison du brise-copeaux NR2 - Géométrie robuste qui constitue le premier choix pour l'ébauche lourde des aciers inoxydables. Elle est dotée d'un angle de coupe positif et d'un double listel négatif extra-large. Elle convient également aux aciers et, sous certaines conditions, aux fontes et aux superalliages. et Substrat T9425 revêtu par MT-CVD, à nuance fonctionnelle, conçu principalement pour les matériaux du groupe P. convient aux matériaux : M - Acier inoxydable (aciers résistants à la corrosion avec une teneur en chrome ≥ 11 %), P - Acier et acier moulé (aciers avec une teneur en alliage ≤ 10 % et d'une dureté < 45 HRC) et Coupe légèrement interrompue.","Einseitige Negativ-Drehplatte, T - dreieckiger 60° eingeschlossener Winkel, Größe 22 mit Eckenradius 0.8 mm. Die Kombination aus Spanbrecher NR2 Spanbrecher ist robust und die erste Wahl für die schwere Schruppbearbeitung von rostfreien Stählen. Er verfügt über einen positiven Spanwinkel und einer negative/negative, extra breite Fase. Er ist auch für Stähle und bedingt für Gusseisen und Superlegierungen geeignet. und MT-CVD-beschichtetes, funktional abgestuftes Substrat T9425, das hauptsächlich für Materialien der P-Gruppe entwickelt wurde. eignet sich für Werkstoffe: M - Edelstahl (korrosionsbeständige Stähle mit ≥ 11 % Chromgehalt), P - Stahl und Stahlguss und Geringfügig unterbrochener Schnitt."],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","possible"]],"f":[[0,"8985893"],[7,"10"],[14,"TNMM"],[16,"TNMM 432-NR2:T9425"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604777216"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"11.277"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"NR2"],[71,"T9425"],[73,"22"],[74,"04"],[84,"TN"],[158,"0.8"],[174,"22.0"],[181,"7.3"],[183,"0.8"],[207,"5.16"],[228,"12.7"],[235,"4.76"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[979916]},"478006":{"c":"TNMM 220412E-NR2:T8430","s":["Double-sided negative turning insert, triangular with inscribed circle diameter of 12.7 mm, 4.76 mm thick, 1.2 mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker NR2 with rounded cutting edges, in grade T8430, a PVD coated fine grained WC-Co carbide within ISO ranges P20 -P40 and M20 -M35, for medium to extra heavy machining of steels and stainless-steels","Plaquette de tournage négative réversible, forme triangulaire avec un diamètre de cercle inscrit de 12.7 mm, 4.76 mm d'épaisseur, rayon de pointe 1.2 mm, précision d'indexage selon la classe de tolérance ISO M, brise-copeaux NR2 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains fins T8430, revêtu PVD dans les plages ISO P20 -P40 et M20 -M35, pour usinage moyen à extra lourd des aciers et aciers inoxydables","Doppelseitige negative Drehwendeschneidplatte, Triangular mit Innenkreisdurchmesser von 12.7 mm, 4.76 mm Dick, 1.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-M, Spanbrecher NR2 mit verrundeter Schneidkante, im Substrat T8430, PVD beschichtet WC-Co Feinkornsubstrat in den ISO-Bereichen P20 -P40 und M20 -M35, zum medium bis schweres schruppen bearbeiten von Stählen und nichtrostenden Stählen"],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","possible"]],"f":[[0,"7977151"],[7,"10"],[14,"TNMM"],[16,"TNMM 433-NR2:T8430"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603817678"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"11.598"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"NR2"],[71,"T8430"],[72,"Heavy roughing"],[73,"22"],[74,"04"],[84,"TN"],[158,"1.2"],[174,"22.0"],[207,"5.16"],[228,"12.7"],[235,"4.76"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[979920]},"478007":{"c":"TNMM 220412E-NR2:T9425","s":["Single-sided Negative turning insert, T - triangular 60° included angle, size 22 with corner radius 1.2 mm. Combination of chipbreaker NR2 chip breaker is robust and the first choice for heavy roughing of Stainless steels. It features positive rake angle and negative/negative, extra-wide double T-land. It's also suitable for Steels, and conditionally for Cast irons and Super-alloys. and MT-CVD-coated, functionally graded substrate T9425, designed primarily for P-group materials. is suitable for materials: M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content), P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC) and Slightly interrupted cut.","Plaquette de tournage unilatérale Plaquettes négatives, T - triangulaire 60° angle inclus, taille 22 avec rayon d'angle 1.2 mm. La combinaison du brise-copeaux NR2 - Géométrie robuste qui constitue le premier choix pour l'ébauche lourde des aciers inoxydables. Elle est dotée d'un angle de coupe positif et d'un double listel négatif extra-large. Elle convient également aux aciers et, sous certaines conditions, aux fontes et aux superalliages. et Substrat T9425 revêtu par MT-CVD, à nuance fonctionnelle, conçu principalement pour les matériaux du groupe P. convient aux matériaux : M - Acier inoxydable (aciers résistants à la corrosion avec une teneur en chrome ≥ 11 %), P - Acier et acier moulé (aciers avec une teneur en alliage ≤ 10 % et d'une dureté < 45 HRC) et Coupe légèrement interrompue.","Einseitige Negativ-Drehplatte, T - dreieckiger 60° eingeschlossener Winkel, Größe 22 mit Eckenradius 1.2 mm. Die Kombination aus Spanbrecher NR2 Spanbrecher ist robust und die erste Wahl für die schwere Schruppbearbeitung von rostfreien Stählen. Er verfügt über einen positiven Spanwinkel und einer negative/negative, extra breite Fase. Er ist auch für Stähle und bedingt für Gusseisen und Superlegierungen geeignet. und MT-CVD-beschichtetes, funktional abgestuftes Substrat T9425, das hauptsächlich für Materialien der P-Gruppe entwickelt wurde. eignet sich für Werkstoffe: M - Edelstahl (korrosionsbeständige Stähle mit ≥ 11 % Chromgehalt), P - Stahl und Stahlguss und Geringfügig unterbrochener Schnitt."],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","possible"]],"f":[[0,"8985896"],[7,"10"],[14,"TNMM"],[16,"TNMM 433-NR2:T9425"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604777247"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"11.134"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"NR2"],[71,"T9425"],[73,"22"],[74,"04"],[84,"TN"],[158,"1.2"],[174,"22.0"],[181,"7.3"],[183,"1.2"],[207,"5.16"],[228,"12.7"],[235,"4.76"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[979921]},"477998":{"c":"TNMM 160408E-OR:T9325","s":["Double-sided negative turning insert, triangular with inscribed circle diameter of 9.525 mm, 4.76 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker OR with rounded cutting edges, in grade T9325, a MT-CVD coated functionally graded WC-Co carbide within ISO range P15 -P35, for medium to extra heavy machining of steels","Plaquette de tournage négative réversible, forme triangulaire avec un diamètre de cercle inscrit de 9.525 mm, 4.76 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO M, brise-copeaux OR avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T9325, revêtu MT-CVD dans la plage ISO P15 -P35, pour usinage moyen à extra lourd des aciers","Doppelseitige negative Drehwendeschneidplatte, Triangular mit Innenkreisdurchmesser von 9.525 mm, 4.76 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-M, Spanbrecher OR mit verrundeter Schneidkante, im Substrat T9325, MT-CVD beschichtet functionally graded WC-Co carbide im ISO-Bereich P15 -P35, zum medium bis schweres schruppen bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["S","possible"]],"f":[[0,"6754166"],[7,"10"],[14,"TNMM"],[16,"TNMM 332-OR:T9325"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602895325"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"6.232"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"OR_"],[71,"T9325"],[72,"Roughing"],[73,"16"],[74,"04"],[84,"TN"],[158,"0.8"],[174,"16.5"],[181,"5.0"],[183,"2.0"],[207,"3.81"],[228,"9.525"],[235,"4.76"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[979912]},"477999":{"c":"TNMM 160408E-OR:T9415","s":["Double-sided negative turning insert, triangular with inscribed circle diameter of 9.525 mm, 4.76 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker OR with rounded cutting edges, in grade T9415, a MT-CVD coated functionally graded WC-Co carbide within ISO range P05 -P30, for medium to extra heavy machining of steels","Plaquette de tournage négative réversible, forme triangulaire avec un diamètre de cercle inscrit de 9.525 mm, 4.76 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO M, brise-copeaux OR avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T9415, revêtu MT-CVD dans la plage ISO P05 -P30, pour usinage moyen à extra lourd des aciers","Doppelseitige negative Drehwendeschneidplatte, Triangular mit Innenkreisdurchmesser von 9.525 mm, 4.76 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-M, Spanbrecher OR mit verrundeter Schneidkante, im Substrat T9415, MT-CVD beschichtet WC-Co Substrat im ISO-Bereich P05 -P30, zum medium bis schweres schruppen bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"],["K","possible"]],"f":[[0,"8345600"],[7,"10"],[14,"TNMM"],[16,"TNMM 332-OR:T9415"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604109178"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"6.263"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"OR_"],[71,"T9415"],[72,"Roughing"],[73,"16"],[74,"04"],[84,"TN"],[158,"0.8"],[174,"16.5"],[207,"3.81"],[228,"9.525"],[235,"4.76"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[979913]},"478000":{"c":"TNMM 160408E-OR:T9425","s":["Single-sided Negative turning insert, T - triangular 60° included angle, size 16 with corner radius 0.8 mm. Combination of chipbreaker OR chip breaker is robust and the first choice for heavy roughing of Steels. It features positive rake angle and negative/stable, extra-wide double T-land. It's also suitable for Cast irons, and conditionally for Stainless steels and Super-alloys. and MT-CVD-coated, functionally graded substrate T9425, designed primarily for P-group materials. is suitable for materials: P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC), K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content) and Slightly interrupted cut.","Plaquette de tournage unilatérale Plaquettes négatives, T - triangulaire 60° angle inclus, taille 16 avec rayon d'angle 0.8 mm. La combinaison du brise-copeaux OR - Géométrie robuste qui constitue le premier choix pour l'ébauche lourde des aciers. Elle est dotée d'un angle de coupe positif et d'un double listel négatif extra-large et stable. Elle convient également aux fontes et, sous certaines conditions, aux aciers inoxydables et aux superalliages. et Substrat T9425 revêtu par MT-CVD, à nuance fonctionnelle, conçu principalement pour les matériaux du groupe P. convient aux matériaux : P - Acier et acier moulé (aciers avec une teneur en alliage ≤ 10 % et d'une dureté < 45 HRC), K - Fonte (fontes moulées et alliages au carbone avec une teneur en carbone > 2 %) et Coupe légèrement interrompue.","Einseitige Negativ-Drehplatte, T - dreieckiger 60° eingeschlossener Winkel, Größe 16 mit Eckenradius 0.8 mm. Die Kombination aus Spanbrecher OR Spanbrecher ist robust und die erste Wahl für die schwere Schruppbearbeitung von Stählen. Er verfügt über einen positiven Spanwinkel und eine negative/stabile, extra breiten Doppelten Fase. Er ist auch für Gusseisen und bedingt für rostfreie Stähle und Super-Legierungen geeignet. und MT-CVD-beschichtetes, funktional abgestuftes Substrat T9425, das hauptsächlich für Materialien der P-Gruppe entwickelt wurde. eignet sich für Werkstoffe: P - Stahl und Stahlguss, K - Gusseisen (Gussstücke aus Eisen und Kohlenstofflegierungen mit > 2% Kohlenstoffgehalt) und Geringfügig unterbrochener Schnitt."],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"8985892"],[7,"10"],[14,"TNMM"],[16,"TNMM 332-OR:T9425"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604777209"],[21,"40.0"],[22,"98.0"],[23,"14.5"],[24,"6.232"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"OR_"],[71,"T9425"],[73,"16"],[74,"04"],[84,"TN"],[158,"0.8"],[174,"16.5"],[181,"5.0"],[183,"2.0"],[207,"3.81"],[228,"9.525"],[235,"4.76"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[979914]},"478003":{"c":"TNMM 220408E-OR:T9325","s":["Double-sided negative turning insert, triangular with inscribed circle diameter of 12.7 mm, 4.76 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker OR with rounded cutting edges, in grade T9325, a MT-CVD coated functionally graded WC-Co carbide within ISO range P15 -P35, for medium to extra heavy machining of steels","Plaquette de tournage négative réversible, forme triangulaire avec un diamètre de cercle inscrit de 12.7 mm, 4.76 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO M, brise-copeaux OR avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T9325, revêtu MT-CVD dans la plage ISO P15 -P35, pour usinage moyen à extra lourd des aciers","Doppelseitige negative Drehwendeschneidplatte, Triangular mit Innenkreisdurchmesser von 12.7 mm, 4.76 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-M, Spanbrecher OR mit verrundeter Schneidkante, im Substrat T9325, MT-CVD beschichtet functionally graded WC-Co carbide im ISO-Bereich P15 -P35, zum medium bis schweres schruppen bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["S","possible"]],"f":[[0,"6754170"],[7,"10"],[14,"TNMM"],[16,"TNMM 432-OR:T9325"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602895363"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"10.924"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"OR_"],[71,"T9325"],[72,"Roughing"],[73,"22"],[74,"04"],[84,"TN"],[158,"0.8"],[174,"22.0"],[181,"6.0"],[183,"2.0"],[207,"5.16"],[228,"12.7"],[235,"4.76"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[979917]},"478004":{"c":"TNMM 220408E-OR:T9335","s":["Double-sided negative turning insert, triangular with inscribed circle diameter of 12.7 mm, 4.76 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker OR with rounded cutting edges, in grade T9335, a MT-CVD coated functionally graded WC-Co carbide within ISO range P20 -P45, for medium to extra heavy machining of steels","Plaquette de tournage négative réversible, forme triangulaire avec un diamètre de cercle inscrit de 12.7 mm, 4.76 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO M, brise-copeaux OR avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T9335, revêtu MT-CVD dans la plage ISO P20 -P45, pour usinage moyen à extra lourd des aciers","Doppelseitige negative Drehwendeschneidplatte, Triangular mit Innenkreisdurchmesser von 12.7 mm, 4.76 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-M, Spanbrecher OR mit verrundeter Schneidkante, im Substrat T9335, MT-CVD beschichtet functionally graded WC-Co carbide im ISO-Bereich P20 -P45, zum medium bis schweres schruppen bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"],["M","possible"],["S","possible"]],"f":[[0,"6754992"],[7,"10"],[14,"TNMM"],[16,"TNMM 432-OR:T9335"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602903587"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"10.688"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"OR_"],[71,"T9335"],[72,"Roughing"],[73,"22"],[74,"04"],[84,"TN"],[158,"0.8"],[174,"22.0"],[181,"6.0"],[183,"2.0"],[207,"5.16"],[228,"12.7"],[235,"4.76"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[979918]},"478005":{"c":"TNMM 220408E-OR:T9425","s":["Single-sided Negative turning insert, T - triangular 60° included angle, size 22 with corner radius 0.8 mm. Combination of chipbreaker OR chip breaker is robust and the first choice for heavy roughing of Steels. It features positive rake angle and negative/stable, extra-wide double T-land. It's also suitable for Cast irons, and conditionally for Stainless steels and Super-alloys. and MT-CVD-coated, functionally graded substrate T9425, designed primarily for P-group materials. is suitable for materials: P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC), K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content) and Slightly interrupted cut.","Plaquette de tournage unilatérale Plaquettes négatives, T - triangulaire 60° angle inclus, taille 22 avec rayon d'angle 0.8 mm. La combinaison du brise-copeaux OR - Géométrie robuste qui constitue le premier choix pour l'ébauche lourde des aciers. Elle est dotée d'un angle de coupe positif et d'un double listel négatif extra-large et stable. Elle convient également aux fontes et, sous certaines conditions, aux aciers inoxydables et aux superalliages. et Substrat T9425 revêtu par MT-CVD, à nuance fonctionnelle, conçu principalement pour les matériaux du groupe P. convient aux matériaux : P - Acier et acier moulé (aciers avec une teneur en alliage ≤ 10 % et d'une dureté < 45 HRC), K - Fonte (fontes moulées et alliages au carbone avec une teneur en carbone > 2 %) et Coupe légèrement interrompue.","Einseitige Negativ-Drehplatte, T - dreieckiger 60° eingeschlossener Winkel, Größe 22 mit Eckenradius 0.8 mm. Die Kombination aus Spanbrecher OR Spanbrecher ist robust und die erste Wahl für die schwere Schruppbearbeitung von Stählen. Er verfügt über einen positiven Spanwinkel und eine negative/stabile, extra breiten Doppelten Fase. Er ist auch für Gusseisen und bedingt für rostfreie Stähle und Super-Legierungen geeignet. und MT-CVD-beschichtetes, funktional abgestuftes Substrat T9425, das hauptsächlich für Materialien der P-Gruppe entwickelt wurde. eignet sich für Werkstoffe: P - Stahl und Stahlguss, K - Gusseisen (Gussstücke aus Eisen und Kohlenstofflegierungen mit > 2% Kohlenstoffgehalt) und Geringfügig unterbrochener Schnitt."],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"8985894"],[7,"10"],[14,"TNMM"],[16,"TNMM 432-OR:T9425"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604777223"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"10.924"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"OR_"],[71,"T9425"],[73,"22"],[74,"04"],[84,"TN"],[158,"0.8"],[174,"22.0"],[181,"6.0"],[183,"2.0"],[207,"5.16"],[228,"12.7"],[235,"4.76"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[979919]},"478008":{"c":"TNMM 220412E-OR:T9325","s":["Double-sided negative turning insert, triangular with inscribed circle diameter of 12.7 mm, 4.76 mm thick, 1.2 mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker OR with rounded cutting edges, in grade T9325, a MT-CVD coated functionally graded WC-Co carbide within ISO range P15 -P35, for medium to extra heavy machining of steels","Plaquette de tournage négative réversible, forme triangulaire avec un diamètre de cercle inscrit de 12.7 mm, 4.76 mm d'épaisseur, rayon de pointe 1.2 mm, précision d'indexage selon la classe de tolérance ISO M, brise-copeaux OR avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T9325, revêtu MT-CVD dans la plage ISO P15 -P35, pour usinage moyen à extra lourd des aciers","Doppelseitige negative Drehwendeschneidplatte, Triangular mit Innenkreisdurchmesser von 12.7 mm, 4.76 mm Dick, 1.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-M, Spanbrecher OR mit verrundeter Schneidkante, im Substrat T9325, MT-CVD beschichtet functionally graded WC-Co carbide im ISO-Bereich P15 -P35, zum medium bis schweres schruppen bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["S","possible"]],"f":[[0,"6754173"],[7,"10"],[14,"TNMM"],[16,"TNMM 433-OR:T9325"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602895394"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"10.859"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"OR_"],[71,"T9325"],[72,"Roughing"],[73,"22"],[74,"04"],[84,"TN"],[158,"1.2"],[174,"22.0"],[181,"7.0"],[183,"2.0"],[207,"5.16"],[228,"12.7"],[235,"4.76"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[979922]},"478009":{"c":"TNMM 220412E-OR:T9335","s":["Double-sided negative turning insert, triangular with inscribed circle diameter of 12.7 mm, 4.76 mm thick, 1.2 mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker OR with rounded cutting edges, in grade T9335, a MT-CVD coated functionally graded WC-Co carbide within ISO range P20 -P45, for medium to extra heavy machining of steels","Plaquette de tournage négative réversible, forme triangulaire avec un diamètre de cercle inscrit de 12.7 mm, 4.76 mm d'épaisseur, rayon de pointe 1.2 mm, précision d'indexage selon la classe de tolérance ISO M, brise-copeaux OR avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T9335, revêtu MT-CVD dans la plage ISO P20 -P45, pour usinage moyen à extra lourd des aciers","Doppelseitige negative Drehwendeschneidplatte, Triangular mit Innenkreisdurchmesser von 12.7 mm, 4.76 mm Dick, 1.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-M, Spanbrecher OR mit verrundeter Schneidkante, im Substrat T9335, MT-CVD beschichtet functionally graded WC-Co carbide im ISO-Bereich P20 -P45, zum medium bis schweres schruppen bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"],["M","possible"],["S","possible"]],"f":[[0,"6754995"],[7,"10"],[14,"TNMM"],[16,"TNMM 433-OR:T9335"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602903617"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"10.625"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"OR_"],[71,"T9335"],[72,"Roughing"],[73,"22"],[74,"04"],[84,"TN"],[158,"1.2"],[174,"22.0"],[181,"7.0"],[183,"2.0"],[207,"5.16"],[228,"12.7"],[235,"4.76"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[979923]},"478010":{"c":"TNMM 220412E-OR:T9425","s":["Single-sided Negative turning insert, T - triangular 60° included angle, size 22 with corner radius 1.2 mm. Combination of chipbreaker OR chip breaker is robust and the first choice for heavy roughing of Steels. It features positive rake angle and negative/stable, extra-wide double T-land. It's also suitable for Cast irons, and conditionally for Stainless steels and Super-alloys. and MT-CVD-coated, functionally graded substrate T9425, designed primarily for P-group materials. is suitable for materials: P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC), K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content) and Slightly interrupted cut.","Plaquette de tournage unilatérale Plaquettes négatives, T - triangulaire 60° angle inclus, taille 22 avec rayon d'angle 1.2 mm. La combinaison du brise-copeaux OR - Géométrie robuste qui constitue le premier choix pour l'ébauche lourde des aciers. Elle est dotée d'un angle de coupe positif et d'un double listel négatif extra-large et stable. Elle convient également aux fontes et, sous certaines conditions, aux aciers inoxydables et aux superalliages. et Substrat T9425 revêtu par MT-CVD, à nuance fonctionnelle, conçu principalement pour les matériaux du groupe P. convient aux matériaux : P - Acier et acier moulé (aciers avec une teneur en alliage ≤ 10 % et d'une dureté < 45 HRC), K - Fonte (fontes moulées et alliages au carbone avec une teneur en carbone > 2 %) et Coupe légèrement interrompue.","Einseitige Negativ-Drehplatte, T - dreieckiger 60° eingeschlossener Winkel, Größe 22 mit Eckenradius 1.2 mm. Die Kombination aus Spanbrecher OR Spanbrecher ist robust und die erste Wahl für die schwere Schruppbearbeitung von Stählen. Er verfügt über einen positiven Spanwinkel und eine negative/stabile, extra breiten Doppelten Fase. Er ist auch für Gusseisen und bedingt für rostfreie Stähle und Super-Legierungen geeignet. und MT-CVD-beschichtetes, funktional abgestuftes Substrat T9425, das hauptsächlich für Materialien der P-Gruppe entwickelt wurde. eignet sich für Werkstoffe: P - Stahl und Stahlguss, K - Gusseisen (Gussstücke aus Eisen und Kohlenstofflegierungen mit > 2% Kohlenstoffgehalt) und Geringfügig unterbrochener Schnitt."],"o":"CZ","a":[["P","primary"],["M","possible"],["K","primary"],["S","possible"]],"f":[[0,"8985897"],[7,"10"],[14,"TNMM"],[16,"TNMM 433-OR:T9425"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604777254"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"10.859"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"OR_"],[71,"T9425"],[73,"22"],[74,"04"],[84,"TN"],[158,"1.2"],[174,"22.0"],[181,"7.0"],[183,"2.0"],[207,"5.16"],[228,"12.7"],[235,"4.76"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[979924]},"478011":{"c":"TNMM 220412EL:T9335","s":["Double-sided negative turning insert, triangular with inscribed circle diameter of 12.7 mm, 4.76 mm thick, 1.2 mm nose radius, indexing accuracy according to ISO-tolerance class-M with rounded cutting edges, in grade T9335, a MT-CVD coated functionally graded WC-Co carbide within ISO ranges P20 -P45 and M15 -M40, for medium to heavy machining of steels and stainless-steels with a left handed turning tool","Plaquette de tournage négative réversible, forme triangulaire avec un diamètre de cercle inscrit de 12.7 mm, 4.76 mm d'épaisseur, rayon de pointe 1.2 mm, précision d'indexage selon la classe de tolérance ISO M avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T9335, revêtu MT-CVD dans les plages ISO P20 -P45 et M15 -M40, pour usinage moyen à lourd des aciers et aciers inoxydables avec un outil de tournage à gauche","Doppelseitige negative Drehwendeschneidplatte, Triangular mit Innenkreisdurchmesser von 12.7 mm, 4.76 mm Dick, 1.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-M mit verrundeter Schneidkante, im Substrat T9335, MT-CVD beschichtet functionally graded WC-Co carbide in den ISO-Bereichen P20 -P45 und M15 -M40, zum medium bis schruppen bearbeiten von Stählen und nichtrostenden Stählen mit einem linksschneidendem Werkzeug"],"o":"CZ","a":[["P","primary"],["M","primary"],["S","possible"]],"f":[[0,"6754994"],[7,"10"],[14,"TNMM"],[16,"TNMM 433L:T9335"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602903600"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"12.4"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"No chipbreaker"],[71,"T9335"],[72,"Medium"],[73,"22"],[74,"04"],[84,"TN"],[158,"1.2"],[174,"22.0"],[181,"5.0"],[183,"1.2"],[207,"5.16"],[228,"12.7"],[235,"4.76"]],"m":[["dimensions",0],["geometry",4]],"d":[],"x":[979925]},"478012":{"c":"TNMM 220412EL:T9425","s":["Single-sided Negative turning insert, T - triangular 60° included angle, size 22 with corner radius 1.2 mm. Combination of chipbreaker EL geometry with left handed design for medium to semi-rough machining, and continuous cuts. and MT-CVD-coated, functionally graded substrate T9425, designed primarily for P-group materials. is suitable for materials: M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content), P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC) and Continuous cut.","Plaquette de tournage unilatérale Plaquettes négatives, T - triangulaire 60° angle inclus, taille 22 avec rayon d'angle 1.2 mm. La combinaison du brise-copeaux EL géométrie avec coupe à gauche pour l'usinage moyen à la semi-ébauche et pour les coupes continues. et Substrat T9425 revêtu par MT-CVD, à nuance fonctionnelle, conçu principalement pour les matériaux du groupe P. convient aux matériaux : M - Acier inoxydable (aciers résistants à la corrosion avec une teneur en chrome ≥ 11 %), P - Acier et acier moulé (aciers avec une teneur en alliage ≤ 10 % et d'une dureté < 45 HRC) et Coupe continue.","Einseitige Negativ-Drehplatte, T - dreieckiger 60° eingeschlossener Winkel, Größe 22 mit Eckenradius 1.2 mm. Die Kombination aus Spanbrecher EL Geometrie in linksschneidender Ausführung von der mittleren Bearbeitung bis zum einfachen Schruppen, bei kontinuierlichen bis unterbrochenen Schnitten. und MT-CVD-beschichtetes, funktional abgestuftes Substrat T9425, das hauptsächlich für Materialien der P-Gruppe entwickelt wurde. eignet sich für Werkstoffe: M - Edelstahl (korrosionsbeständige Stähle mit ≥ 11 % Chromgehalt), P - Stahl und Stahlguss und Kontinuierlicher Schnitt."],"o":"CZ","a":[["P","primary"],["M","primary"],["S","possible"]],"f":[[0,"8985895"],[7,"10"],[14,"TNMM"],[16,"TNMM 433EL:T9425"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604777230"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"12.4"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"No chipbreaker"],[71,"T9425"],[73,"22"],[74,"04"],[84,"TN"],[158,"1.2"],[174,"22.0"],[181,"5.0"],[183,"1.2"],[207,"5.16"],[228,"12.7"],[235,"4.76"]],"m":[["dimensions",0],["geometry",4]],"d":[],"x":[979926]},"478013":{"c":"TNMM 220412ER:T9335","s":["Double-sided negative turning insert, triangular with inscribed circle diameter of 12.7 mm, 4.76 mm thick, 1.2 mm nose radius, indexing accuracy according to ISO-tolerance class-M with rounded cutting edges, in grade T9335, a MT-CVD coated functionally graded WC-Co carbide within ISO ranges P20 -P45 and M15 -M40, for medium to heavy machining of steels and stainless-steels with a right handed turning tool","Plaquette de tournage négative réversible, forme triangulaire avec un diamètre de cercle inscrit de 12.7 mm, 4.76 mm d'épaisseur, rayon de pointe 1.2 mm, précision d'indexage selon la classe de tolérance ISO M avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T9335, revêtu MT-CVD dans les plages ISO P20 -P45 et M15 -M40, pour usinage moyen à lourd des aciers et aciers inoxydables avec un outil de tournage à droite","Doppelseitige negative Drehwendeschneidplatte, Triangular mit Innenkreisdurchmesser von 12.7 mm, 4.76 mm Dick, 1.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-M mit verrundeter Schneidkante, im Substrat T9335, MT-CVD beschichtet functionally graded WC-Co carbide in den ISO-Bereichen P20 -P45 und M15 -M40, zum medium bis schruppen bearbeiten von Stählen und nichtrostenden Stählen mit einem rechtsschneidendem Werkzeug"],"o":"CZ","a":[["P","primary"],["M","primary"],["S","possible"]],"f":[[0,"6754996"],[7,"10"],[14,"TNMM"],[16,"TNMM 433R:T9335"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602903624"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"12.4"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"No chipbreaker"],[71,"T9335"],[72,"Medium"],[73,"22"],[74,"04"],[84,"TN"],[158,"1.2"],[174,"22.0"],[181,"5.0"],[183,"1.2"],[207,"5.16"],[228,"12.7"],[235,"4.76"]],"m":[["dimensions",0],["geometry",4]],"d":[],"x":[979927]},"478014":{"c":"TNMM 220412ER:T9425","s":["Single-sided Negative turning insert, T - triangular 60° included angle, size 22 with corner radius 1.2 mm. Combination of chipbreaker ER geometry with right-handed design for medium to semi-rough machining, and continuous cuts. and MT-CVD-coated, functionally graded substrate T9425, designed primarily for P-group materials. is suitable for materials: M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content), P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC) and Continuous cut.","Plaquette de tournage unilatérale Plaquettes négatives, T - triangulaire 60° angle inclus, taille 22 avec rayon d'angle 1.2 mm. La combinaison du brise-copeaux ER géométrie avec coupe à droite pour l'usinage moyen à la semi-ébauche et pour les coupes continues. et Substrat T9425 revêtu par MT-CVD, à nuance fonctionnelle, conçu principalement pour les matériaux du groupe P. convient aux matériaux : M - Acier inoxydable (aciers résistants à la corrosion avec une teneur en chrome ≥ 11 %), P - Acier et acier moulé (aciers avec une teneur en alliage ≤ 10 % et d'une dureté < 45 HRC) et Coupe continue.","Einseitige Negativ-Drehplatte, T - dreieckiger 60° eingeschlossener Winkel, Größe 22 mit Eckenradius 1.2 mm. Die Kombination aus Spanbrecher ER Geometrie in rechtsschneidender Ausführung von der mittleren Bearbeitung bis zum einfachen Schruppen, bei kontinuierlichen bis unterbrochenen Schnitten. und MT-CVD-beschichtetes, funktional abgestuftes Substrat T9425, das hauptsächlich für Materialien der P-Gruppe entwickelt wurde. eignet sich für Werkstoffe: M - Edelstahl (korrosionsbeständige Stähle mit ≥ 11 % Chromgehalt), P - Stahl und Stahlguss und Kontinuierlicher Schnitt."],"o":"CZ","a":[["P","primary"],["M","primary"],["S","possible"]],"f":[[0,"8985898"],[7,"10"],[14,"TNMM"],[16,"TNMM 433ER:T9425"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604777261"],[21,"56.0"],[22,"139.0"],[23,"14.5"],[24,"12.4"],[64,"Negative",null,"Plaquettes négatives","Negativ"],[65,"T - triangular 60° included angle",null,"T - triangulaire 60° angle inclus","T - dreieckiger 60° eingeschlossener Winkel"],[66,"TNMM"],[68,"M"],[69,"N 0°"],[70,"No chipbreaker"],[71,"T9425"],[73,"22"],[74,"04"],[84,"TN"],[158,"1.2"],[174,"22.0"],[181,"5.0"],[183,"1.2"],[207,"5.16"],[228,"12.7"],[235,"4.76"]],"m":[["dimensions",0],["geometry",4]],"d":[],"x":[979928]}}}

Aan winkelmandje toevoegen

Toevoegen aan verlanglijst

Algemene voorwaarden
Zakelijke retouren uitsluitend na voorafgaande goedkeuringLevering: 3-4 werkdagen. België en Luxemburg: 1 werkdag. Neem contact op voor levertijd en beschikbaarheid.

Specificaties

Uitvoering (DP)

160408E-NR2:T9425, 160408E-OR:T9325, 160408E-OR:T9415, 160408E-OR:T9425, 220408E-NR2:T9325, 220408E-NR2:T9425, 220408E-OR:T9325, 220408E-OR:T9335, 220408E-OR:T9425, 220412E-NR2:T8430, 220412E-NR2:T9425, 220412E-OR:T9325, 220412E-OR:T9335, 220412E-OR:T9425, 220412EL:T9335, 220412EL:T9425, 220412ER:T9335, 220412ER:T9425, 270612-HR3:T7325, 270616-HR3:T7325, 270616E-HR:T9325, 270616E-HR:T9335, 270616E-HR:T9425, 270624-HR3:T7325, 270624E-HR:T9226, 270632-HR3:T7325

Alternatieve producten

Deze andere producten kunnen je interesseren

TNMM Draaiwisselplaat - negatief

Productinformatie

Uitvoering (DP)

Verpakking

Specificaties

Alternatieve producten