DCGT Plaquette de tournage - Positive

Name: DCGT Plaquette de tournage - Positive (11T301E-SF3:T6310) — 10 pièces
SKU: DCGT 11T301E-SF3:T6310
Price: 133.3 EUR
Availability: InStock

PRAMET République tchèque

13,33 €

excl. TVA

Informations produit

Turning Insert - Positive

Variante (DP)

Conditionnement
- Unité(s)
- 10 Units

{"v":1,"a":["https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/DCGT_DIM.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/AL_POS_PROF.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/SI_POS_PROF.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/FF2_POS_PROF.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/NF1_POS_PROF.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/SF3_POS_PROF.png"],"p":{"465163":{"c":"DCGT 070202F-AL:HF7","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range N10 -N25, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins HF7, non-revêtu dans la plage ISO N10 -N25, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat HF7, unbeschichtet WC-Co Feinkornsubstrat im ISO-Bereich N10 -N25, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6752064"],[7,"10"],[14,"DCGT"],[16,"DCGT 21.50.5F-AL:HF7"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602874306"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.239"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"HF7"],[73,"07"],[74,"02"],[84,"DC"],[158,"0.2"],[174,"7.8"],[181,"2.1"],[183,"0.3"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[966222]},"465164":{"c":"DCGT 070202F-AL:T0315","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade T0315, a PVD coated fine grained WC-Co carbide within ISO range N05 -N20, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins T0315, revêtu PVD dans la plage ISO N05 -N20, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat T0315, PVD beschichtet WC-Co Feinkornsubstrat im ISO-Bereich N05 -N20, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6756145"],[7,"10"],[14,"DCGT"],[16,"DCGT 21.50.5F-AL:T0315"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602915115"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.239"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"T0315"],[73,"07"],[74,"02"],[84,"DC"],[158,"0.2"],[174,"7.8"],[181,"2.1"],[183,"0.3"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[966223]},"465168":{"c":"DCGT 070204F-AL:HF7","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range N10 -N25, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins HF7, non-revêtu dans la plage ISO N10 -N25, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat HF7, unbeschichtet WC-Co Feinkornsubstrat im ISO-Bereich N10 -N25, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6751734"],[7,"10"],[14,"DCGT"],[16,"DCGT 21.51F-AL:HF7"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602871008"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"0.204"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"HF7"],[73,"07"],[74,"02"],[84,"DC"],[158,"0.4"],[174,"7.8"],[181,"2.1"],[183,"0.4"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[966227]},"465169":{"c":"DCGT 070204F-AL:T0315","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade T0315, a PVD coated fine grained WC-Co carbide within ISO range N05 -N20, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins T0315, revêtu PVD dans la plage ISO N05 -N20, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat T0315, PVD beschichtet WC-Co Feinkornsubstrat im ISO-Bereich N05 -N20, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6756146"],[7,"10"],[14,"DCGT"],[16,"DCGT 21.51F-AL:T0315"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602915122"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.284"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"T0315"],[73,"07"],[74,"02"],[84,"DC"],[158,"0.4"],[174,"7.8"],[181,"2.1"],[183,"0.4"],[207,"2.8"],[228,"6.35"],[235,"2.38"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[966228]},"465140":{"c":"DCGT 11T302F-AL:HF7","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range N10 -N25, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins HF7, non-revêtu dans la plage ISO N10 -N25, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat HF7, unbeschichtet WC-Co Feinkornsubstrat im ISO-Bereich N10 -N25, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6752066"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.50.5F-AL:HF7"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602874320"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.948"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"HF7"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.2"],[174,"11.6"],[181,"3.3"],[183,"0.3"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[966199]},"465141":{"c":"DCGT 11T302F-AL:T0315","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade T0315, a PVD coated fine grained WC-Co carbide within ISO range N05 -N20, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins T0315, revêtu PVD dans la plage ISO N05 -N20, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat T0315, PVD beschichtet WC-Co Feinkornsubstrat im ISO-Bereich N05 -N20, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6756147"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.50.5F-AL:T0315"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602915139"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.948"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"T0315"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.2"],[174,"11.6"],[181,"3.3"],[183,"0.3"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[966200]},"465149":{"c":"DCGT 11T304F-AL:HF7","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range N10 -N25, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins HF7, non-revêtu dans la plage ISO N10 -N25, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat HF7, unbeschichtet WC-Co Feinkornsubstrat im ISO-Bereich N10 -N25, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6751736"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.51F-AL:HF7"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602871022"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.508"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"HF7"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.4"],[174,"11.6"],[181,"3.3"],[183,"0.4"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[966208]},"465150":{"c":"DCGT 11T304F-AL:T0315","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade T0315, a PVD coated fine grained WC-Co carbide within ISO range N05 -N20, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins T0315, revêtu PVD dans la plage ISO N05 -N20, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat T0315, PVD beschichtet WC-Co Feinkornsubstrat im ISO-Bereich N05 -N20, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6756148"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.51F-AL:T0315"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602915146"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.508"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"T0315"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.4"],[174,"11.6"],[181,"3.3"],[183,"0.4"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[966209]},"465158":{"c":"DCGT 11T308F-AL:HF7","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range N10 -N25, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins HF7, non-revêtu dans la plage ISO N10 -N25, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat HF7, unbeschichtet WC-Co Feinkornsubstrat im ISO-Bereich N10 -N25, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6752068"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.52F-AL:HF7"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602874344"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.508"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"HF7"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.8"],[174,"11.6"],[181,"3.3"],[183,"0.8"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[966217]},"465159":{"c":"DCGT 11T308F-AL:T0315","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker AL with sharp cutting edges, in grade T0315, a PVD coated fine grained WC-Co carbide within ISO range N05 -N20, for fine to heavy machining of non-ferrous metals","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux AL avec arêtes de coupe vive, en nuance carbure WC-Co à grains fins T0315, revêtu PVD dans la plage ISO N05 -N20, pour usinage fin à lourd des métaux non-ferreux","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher AL mit scharfer Schneidkante, im Substrat T0315, PVD beschichtet WC-Co Feinkornsubstrat im ISO-Bereich N05 -N20, zum schlichten bis schruppen bearbeiten von Nichteisenmetallen"],"o":"CZ","a":[["N","primary"]],"f":[[0,"6756149"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.52F-AL:T0315"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603602915153"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.508"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"AL"],[71,"T0315"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.8"],[174,"11.6"],[181,"3.3"],[183,"0.8"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",1]],"d":[],"x":[966218]},"465148":{"c":"DCGT 11T304ER-SI:T8430","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SI with rounded cutting edges, in grade T8430, a PVD coated fine grained WC-Co carbide within ISO ranges P20 -P40 and M20 -M35, for fine to medium machining of steels and stainless-steels with a right handed turning tool","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SI avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains fins T8430, revêtu PVD dans les plages ISO P20 -P40 et M20 -M35, pour usinage fin à moyen des aciers et aciers inoxydables avec un outil de tournage à droite","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SI mit verrundeter Schneidkante, im Substrat T8430, PVD beschichtet WC-Co Feinkornsubstrat in den ISO-Bereichen P20 -P40 und M20 -M35, zum schlichten bis medium bearbeiten von Stählen und nichtrostenden Stählen mit einem rechtsschneidendem Werkzeug"],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","possible"]],"f":[[0,"7977208"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.51R-SI:T8430"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603818194"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.526"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SI"],[71,"T8430"],[72,"Medium"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.4"],[174,"11.6"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[966207]},"465157":{"c":"DCGT 11T308ER-SI:T8430","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SI with rounded cutting edges, in grade T8430, a PVD coated fine grained WC-Co carbide within ISO ranges P20 -P40 and M20 -M35, for fine to medium machining of steels and stainless-steels with a right handed turning tool","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SI avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains fins T8430, revêtu PVD dans les plages ISO P20 -P40 et M20 -M35, pour usinage fin à moyen des aciers et aciers inoxydables avec un outil de tournage à droite","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SI mit verrundeter Schneidkante, im Substrat T8430, PVD beschichtet WC-Co Feinkornsubstrat in den ISO-Bereichen P20 -P40 und M20 -M35, zum schlichten bis medium bearbeiten von Stählen und nichtrostenden Stählen mit einem rechtsschneidendem Werkzeug"],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","possible"]],"f":[[0,"7977210"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.52R-SI:T8430"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603818217"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.501"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SI"],[71,"T8430"],[72,"Medium"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.8"],[174,"11.6"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[966216]},"465133":{"c":"DCGT 11T302E-FF2:T8430","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker FF2 with rounded cutting edges, in grade T8430, a PVD coated fine grained WC-Co carbide within ISO range P20 -P40, for fine to medium machining of steels","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux FF2 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains fins T8430, revêtu PVD dans la plage ISO P20 -P40, pour usinage fin à moyen des aciers","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher FF2 mit verrundeter Schneidkante, im Substrat T8430, PVD beschichtet WC-Co Feinkornsubstrat im ISO-Bereich P20 -P40, zum schlichten bis medium bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"],["K","possible"]],"f":[[0,"7977206"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.50.5-FF2:T8430"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603818170"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.625"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"FF2"],[71,"T8430"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.2"],[174,"11.6"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[966192]},"465134":{"c":"DCGT 11T302E-FF2:T9325","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker FF2 with rounded cutting edges, in grade T9325, a MT-CVD coated functionally graded WC-Co carbide within ISO range P15 -P35, for fine to medium machining of steels","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux FF2 avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T9325, revêtu MT-CVD dans la plage ISO P15 -P35, pour usinage fin à moyen des aciers","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher FF2 mit verrundeter Schneidkante, im Substrat T9325, MT-CVD beschichtet functionally graded WC-Co carbide im ISO-Bereich P15 -P35, zum schlichten bis medium bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"],["K","possible"]],"f":[[0,"7156727"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.50.5-FF2:T9325"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603166684"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.44"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"FF2"],[71,"T9325"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.2"],[174,"11.6"],[181,"2.5"],[183,"0.2"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[966193]},"465135":{"c":"DCGT 11T302E-FF2:T9425","s":["Single-sided Positive turning insert, D - rhombic 55° included angle, size 11 with corner radius 0.2 mm. Combination of chipbreaker FF2 chip breaker is sharp and the first choice for fine-finishing of Steels. It features slightly positive rake angle without T-land. It's also suitable for Cast irons. and MT-CVD-coated, functionally graded substrate T9425, designed primarily for P-group materials. is suitable for materials: P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC), K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content) and Continuous cut.","Plaquette de tournage unilatérale Plaquettes positives, D - rhombique 55° angle inclus, taille 11 avec rayon d'angle 0.2 mm. La combinaison du brise-copeaux FF2 géométrie FF2 tranchante, premier choix pour la finition des aciers. Se caractérise par un angle de coupe légèrement positif, sans listel. Convient également aux fontes. et Substrat T9425 revêtu par MT-CVD, à nuance fonctionnelle, conçu principalement pour les matériaux du groupe P. convient aux matériaux : P - Acier et acier moulé (aciers avec une teneur en alliage ≤ 10 % et d'une dureté < 45 HRC), K - Fonte (fontes moulées et alliages au carbone avec une teneur en carbone > 2 %) et Coupe continue.","Einseitige Positiv-Drehplatte, D - rhombischer 55° eingeschlossener Winkel, Größe 11 mit Eckenradius 0.2 mm. Die Kombination aus Spanbrecher FF2 spanbrecher ist positiv und die erste Wahl für die Schlichtbearbeitung von Stählen. Er hat einen leicht positiven Spanwinkel ohne Fase. Er ist auch für Gusseisen geeignet. und MT-CVD-beschichtetes, funktional abgestuftes Substrat T9425, das hauptsächlich für Materialien der P-Gruppe entwickelt wurde. eignet sich für Werkstoffe: P - Stahl und Stahlguss, K - Gusseisen (Gussstücke aus Eisen und Kohlenstofflegierungen mit > 2% Kohlenstoffgehalt) und Kontinuierlicher Schnitt."],"o":"CZ","a":[["P","primary"],["K","primary"]],"f":[[0,"8985976"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.50.5-FF2:T9425"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604777810"],[21,"40.0"],[22,"98.0"],[23,"14.5"],[24,"4.44"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"FF2"],[71,"T9425"],[73,"11"],[74,"0"],[84,"DC"],[158,"0.2"],[174,"11.6"],[181,"2.5"],[183,"0.2"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[966194]},"465136":{"c":"DCGT 11T302E-FF2:TT010","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker FF2 with rounded cutting edges, in grade TT010, an uncoated cermet within ISO range P01 -P10, for fine to medium machining of steels","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux FF2 avec arêtes de coupe arrondies, en nuance cermet TT010, non-revêtu dans la plage ISO P01 -P10, pour usinage fin à moyen des aciers","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher FF2 mit verrundeter Schneidkante, im Substrat TT010, unbeschichtet Cermet im ISO-Bereich P01 -P10, zum schlichten bis medium bearbeiten von Stählen"],"o":"CZ","a":[["P","primary"]],"f":[[0,"7080623"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.50.5-FF2:TT010"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603129184"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"2.22"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"FF2"],[71,"TT010"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.2"],[174,"11.6"],[181,"2.5"],[183,"0.2"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",3]],"d":[],"x":[966195]},"465142":{"c":"DCGT 11T304E-NF1:T6310","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker NF1 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges P01 -P15/M01 -M15 and S01 -S15, for fine to medium machining of steels, stainless-steels and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux NF1 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T6310, revêtu PVD dans les plages ISO P01 -P15/M01 -M15 et S01 -S15, pour usinage fin à moyen des aciers, aciers inoxydables et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher NF1 mit verrundeter Schneidkante, im Substrat T6310, PVD beschichtet WC-Co Feinstkornsubstrat in den ISO-Bereichen P01 -P15/M01 -M15 und S01 -S15, zum schlichten bis medium bearbeiten von Stählen, nichtrostenden Stählen und Superlegierungen"],"o":"CZ","a":[["P","primary"],["M","primary"],["N","possible"],["S","primary"],["H","possible"]],"f":[[0,"7167407"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.51-NF1:T6310"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603170148"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.615"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"NF1"],[71,"T6310"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.4"],[174,"11.6"],[181,"3.0"],[183,"0.3"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",4]],"d":[],"x":[966201]},"465143":{"c":"DCGT 11T304E-NF1:T7325","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker NF1 with rounded cutting edges, in grade T7325, a MT-CVD coated functionally graded WC-Co carbide within ISO ranges M10 -M25 and S10 -S25, for fine to medium machining of stainless-steels and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux NF1 avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T7325, revêtu MT-CVD dans les plages ISO M10 -M25 et S10 -S25, pour usinage fin à moyen des aciers inoxydables et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher NF1 mit verrundeter Schneidkante, im Substrat T7325, MT-CVD beschichtet functionally graded WC-Co carbide in den ISO-Bereichen M10 -M25 und S10 -S25, zum schlichten bis medium bearbeiten von nichtrostenden Stählen und Superlegierungen"],"o":"CZ","a":[["P","possible"],["M","primary"],["S","primary"]],"f":[[0,"7167408"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.51-NF1:T7325"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603170155"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.417"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"NF1"],[71,"T7325"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.4"],[174,"11.6"],[181,"3.0"],[183,"0.3"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",4]],"d":[],"x":[966202]},"465151":{"c":"DCGT 11T308E-NF1:T6310","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker NF1 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges P01 -P15/M01 -M15 and S01 -S15, for fine to medium machining of steels, stainless-steels and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux NF1 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T6310, revêtu PVD dans les plages ISO P01 -P15/M01 -M15 et S01 -S15, pour usinage fin à moyen des aciers, aciers inoxydables et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher NF1 mit verrundeter Schneidkante, im Substrat T6310, PVD beschichtet WC-Co Feinstkornsubstrat in den ISO-Bereichen P01 -P15/M01 -M15 und S01 -S15, zum schlichten bis medium bearbeiten von Stählen, nichtrostenden Stählen und Superlegierungen"],"o":"CZ","a":[["P","primary"],["M","primary"],["N","possible"],["S","primary"],["H","possible"]],"f":[[0,"7167410"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.52-NF1:T6310"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603170179"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.569"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"NF1"],[71,"T6310"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.8"],[174,"11.6"],[181,"3.0"],[183,"0.5"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",4]],"d":[],"x":[966210]},"465152":{"c":"DCGT 11T308E-NF1:T7325","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker NF1 with rounded cutting edges, in grade T7325, a MT-CVD coated functionally graded WC-Co carbide within ISO ranges M10 -M25 and S10 -S25, for fine to medium machining of stainless-steels and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux NF1 avec arêtes de coupe arrondies, en nuance carbure WC-Co gradient fonctionnel T7325, revêtu MT-CVD dans les plages ISO M10 -M25 et S10 -S25, pour usinage fin à moyen des aciers inoxydables et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher NF1 mit verrundeter Schneidkante, im Substrat T7325, MT-CVD beschichtet functionally graded WC-Co carbide in den ISO-Bereichen M10 -M25 und S10 -S25, zum schlichten bis medium bearbeiten von nichtrostenden Stählen und Superlegierungen"],"o":"CZ","a":[["P","possible"],["M","primary"],["S","primary"]],"f":[[0,"7167411"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.52-NF1:T7325"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603170186"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.374"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"NF1"],[71,"T7325"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.8"],[174,"11.6"],[181,"3.0"],[183,"0.5"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",4]],"d":[],"x":[966211]},"465160":{"c":"DCGT 070201E-SF3:T6310","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.1 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges M01 -M15/N05 -N20 and S01 -S15, for fine to medium machining of stainless-steels, non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.1 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T6310, revêtu PVD dans les plages ISO M01 -M15/N05 -N20 et S01 -S15, pour usinage fin à moyen des aciers inoxydables, métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.1 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T6310, PVD beschichtet WC-Co Feinstkornsubstrat in den ISO-Bereichen M01 -M15/N05 -N20 und S01 -S15, zum schlichten bis medium bearbeiten von nichtrostenden Stählen, Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","primary"],["S","primary"],["H","possible"]],"f":[[0,"7600315"],[7,"10"],[14,"DCGT"],[16,"DCGT 21.50.2-SF3:T6310"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603519053"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.233"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T6310"],[72,"Fine-finishing"],[73,"07"],[74,"02"],[84,"DC"],[158,"0.1"],[174,"7.8"],[181,"1.6"],[183,"0.1"],[207,"2.8"],[228,"6.35"],[235,"2.58"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966219]},"465161":{"c":"DCGT 070202E-SF3:T6310","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges M01 -M15/N05 -N20 and S01 -S15, for fine to medium machining of stainless-steels, non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T6310, revêtu PVD dans les plages ISO M01 -M15/N05 -N20 et S01 -S15, pour usinage fin à moyen des aciers inoxydables, métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T6310, PVD beschichtet WC-Co Feinstkornsubstrat in den ISO-Bereichen M01 -M15/N05 -N20 und S01 -S15, zum schlichten bis medium bearbeiten von nichtrostenden Stählen, Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","primary"],["S","primary"],["H","possible"]],"f":[[0,"7168557"],[7,"10"],[14,"DCGT"],[16,"DCGT 21.50.5-SF3:T6310"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171534"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.234"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T6310"],[72,"Fine-finishing"],[73,"07"],[74,"02"],[84,"DC"],[158,"0.2"],[174,"7.8"],[181,"1.6"],[183,"0.2"],[207,"2.8"],[228,"6.35"],[235,"2.58"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966220]},"465162":{"c":"DCGT 070202E-SF3:T8415","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T8415.","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T8415.","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T8415."],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","possible"],["S","primary"],["H","possible"]],"f":[[0,"8553220"],[7,"10"],[14,"DCGT"],[16,"DCGT 21.50.5-SF3:T8415"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604269452"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.244"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T8415"],[72,"Fine-finishing"],[73,"07"],[74,"02"],[84,"DC"],[158,"0.2"],[174,"7.8"],[181,"1.6"],[183,"0.2"],[207,"2.8"],[228,"6.35"],[235,"2.58"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966221]},"465165":{"c":"DCGT 070204E-SF3:H07","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade H07, an uncoated WC-Co carbide within ISO ranges N10 -N30 and S01 -S20, for fine to medium machining of non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co H07, non-revêtu dans les plages ISO N10 -N30 et S01 -S20, pour usinage fin à moyen des métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat H07, unbeschichtet WC-Co Substrat in den ISO-Bereichen N10 -N30 und S01 -S20, zum schlichten bis medium bearbeiten von Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"7168559"],[7,"10"],[14,"DCGT"],[16,"DCGT 21.51-SF3:H07"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171558"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.252"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"H07"],[72,"Fine-finishing"],[73,"07"],[74,"02"],[84,"DC"],[158,"0.4"],[174,"7.8"],[181,"2.0"],[183,"0.2"],[207,"2.8"],[228,"6.35"],[235,"2.58"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966224]},"465166":{"c":"DCGT 070204E-SF3:T6310","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges M01 -M15/N05 -N20 and S01 -S15, for fine to medium machining of stainless-steels, non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T6310, revêtu PVD dans les plages ISO M01 -M15/N05 -N20 et S01 -S15, pour usinage fin à moyen des aciers inoxydables, métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T6310, PVD beschichtet WC-Co Feinstkornsubstrat in den ISO-Bereichen M01 -M15/N05 -N20 und S01 -S15, zum schlichten bis medium bearbeiten von nichtrostenden Stählen, Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","primary"],["S","primary"],["H","possible"]],"f":[[0,"7168560"],[7,"10"],[14,"DCGT"],[16,"DCGT 21.51-SF3:T6310"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171565"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.234"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T6310"],[72,"Fine-finishing"],[73,"07"],[74,"02"],[84,"DC"],[158,"0.4"],[174,"7.8"],[181,"2.0"],[183,"0.2"],[207,"2.8"],[228,"6.35"],[235,"2.58"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966225]},"465167":{"c":"DCGT 070204E-SF3:T8415","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 6.35 mm, 2.38 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T8415.","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 6.35 mm, 2.38 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co T8415.","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 6.35 mm, 2.38 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T8415."],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","possible"],["S","primary"],["H","possible"]],"f":[[0,"8553221"],[7,"10"],[14,"DCGT"],[16,"DCGT 21.51-SF3:T8415"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604269469"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"1.244"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T8415"],[72,"Fine-finishing"],[73,"07"],[74,"02"],[84,"DC"],[158,"0.4"],[174,"7.8"],[181,"2.0"],[183,"0.2"],[207,"2.8"],[228,"6.35"],[235,"2.58"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966226]},"465132":{"c":"DCGT 11T301E-SF3:T6310","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.1 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges M01 -M15/N05 -N20 and S01 -S15, for fine to medium machining of stainless-steels, non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.1 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T6310, revêtu PVD dans les plages ISO M01 -M15/N05 -N20 et S01 -S15, pour usinage fin à moyen des aciers inoxydables, métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.1 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T6310, PVD beschichtet WC-Co Feinstkornsubstrat in den ISO-Bereichen M01 -M15/N05 -N20 und S01 -S15, zum schlichten bis medium bearbeiten von nichtrostenden Stählen, Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","primary"],["S","primary"],["H","possible"]],"f":[[0,"7600316"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.50.2-SF3:T6310"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603519060"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.447"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T6310"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.1"],[174,"11.6"],[181,"1.8"],[183,"0.1"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966191]},"465137":{"c":"DCGT 11T302E-SF3:H07","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade H07, an uncoated WC-Co carbide within ISO ranges N10 -N30 and S01 -S20, for fine to medium machining of non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co H07, non-revêtu dans les plages ISO N10 -N30 et S01 -S20, pour usinage fin à moyen des métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat H07, unbeschichtet WC-Co Substrat in den ISO-Bereichen N10 -N30 und S01 -S20, zum schlichten bis medium bearbeiten von Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"7168562"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.50.5-SF3:H07"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171589"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.517"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"H07"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.2"],[174,"11.6"],[181,"2.0"],[183,"0.2"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966196]},"465138":{"c":"DCGT 11T302E-SF3:T6310","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges M01 -M15/N05 -N20 and S01 -S15, for fine to medium machining of stainless-steels, non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T6310, revêtu PVD dans les plages ISO M01 -M15/N05 -N20 et S01 -S15, pour usinage fin à moyen des aciers inoxydables, métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T6310, PVD beschichtet WC-Co Feinstkornsubstrat in den ISO-Bereichen M01 -M15/N05 -N20 und S01 -S15, zum schlichten bis medium bearbeiten von nichtrostenden Stählen, Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","primary"],["S","primary"],["H","possible"]],"f":[[0,"7168563"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.50.5-SF3:T6310"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171596"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.451"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T6310"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.2"],[174,"11.6"],[181,"2.0"],[183,"0.2"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966197]},"465139":{"c":"DCGT 11T302E-SF3:T8415","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.2 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T8415.","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.2 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co T8415.","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.2 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T8415."],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","possible"],["S","primary"],["H","possible"]],"f":[[0,"8553222"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.50.5-SF3:T8415"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604269476"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.487"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T8415"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.2"],[174,"11.6"],[181,"2.0"],[183,"0.2"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966198]},"465144":{"c":"DCGT 11T304E-SF3:H07","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade H07, an uncoated WC-Co carbide within ISO ranges N10 -N30 and S01 -S20, for fine to medium machining of non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co H07, non-revêtu dans les plages ISO N10 -N30 et S01 -S20, pour usinage fin à moyen des métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat H07, unbeschichtet WC-Co Substrat in den ISO-Bereichen N10 -N30 und S01 -S20, zum schlichten bis medium bearbeiten von Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"7168564"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.51-SF3:H07"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171602"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.523"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"H07"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.4"],[174,"11.6"],[181,"2.2"],[183,"0.2"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966203]},"465145":{"c":"DCGT 11T304E-SF3:T6310","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges M01 -M15/N05 -N20 and S01 -S15, for fine to medium machining of stainless-steels, non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T6310, revêtu PVD dans les plages ISO M01 -M15/N05 -N20 et S01 -S15, pour usinage fin à moyen des aciers inoxydables, métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T6310, PVD beschichtet WC-Co Feinstkornsubstrat in den ISO-Bereichen M01 -M15/N05 -N20 und S01 -S15, zum schlichten bis medium bearbeiten von nichtrostenden Stählen, Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","primary"],["S","primary"],["H","possible"]],"f":[[0,"7168565"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.51-SF3:T6310"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171619"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.456"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T6310"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.4"],[174,"11.6"],[181,"2.2"],[183,"0.2"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966204]},"465146":{"c":"DCGT 11T304E-SF3:T8415","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T8415.","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co T8415.","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T8415."],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","possible"],["S","primary"],["H","possible"]],"f":[[0,"8553223"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.51-SF3:T8415"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604269483"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.492"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T8415"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.4"],[174,"11.6"],[181,"2.2"],[183,"0.2"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966205]},"465153":{"c":"DCGT 11T308E-SF3:H07","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade H07, an uncoated WC-Co carbide within ISO ranges N10 -N30 and S01 -S20, for fine to medium machining of non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co H07, non-revêtu dans les plages ISO N10 -N30 et S01 -S20, pour usinage fin à moyen des métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat H07, unbeschichtet WC-Co Substrat in den ISO-Bereichen N10 -N30 und S01 -S20, zum schlichten bis medium bearbeiten von Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"7168567"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.52-SF3:H07"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171633"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.511"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"H07"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.8"],[174,"11.6"],[181,"2.5"],[183,"0.6"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966212]},"465154":{"c":"DCGT 11T308E-SF3:T6310","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T6310, a PVD coated extra fine grained WC-Co carbide within ISO ranges M01 -M15/N05 -N20 and S01 -S15, for fine to medium machining of stainless-steels, non-ferrous metals and super-alloys","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains extra-fins T6310, revêtu PVD dans les plages ISO M01 -M15/N05 -N20 et S01 -S15, pour usinage fin à moyen des aciers inoxydables, métaux non-ferreux et superalliages","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T6310, PVD beschichtet WC-Co Feinstkornsubstrat in den ISO-Bereichen M01 -M15/N05 -N20 und S01 -S15, zum schlichten bis medium bearbeiten von nichtrostenden Stählen, Nichteisenmetallen und Superlegierungen"],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","primary"],["S","primary"],["H","possible"]],"f":[[0,"7168568"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.52-SF3:T6310"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603171640"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.444"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T6310"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.8"],[174,"11.6"],[181,"2.5"],[183,"0.6"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966213]},"465155":{"c":"DCGT 11T308E-SF3:T8415","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade T8415.","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SF3 avec arêtes de coupe arrondies, en nuance carbure WC-Co T8415.","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SF3 mit verrundeter Schneidkante, im Substrat T8415."],"o":"CZ","a":[["P","possible"],["M","primary"],["K","possible"],["N","possible"],["S","primary"],["H","possible"]],"f":[[0,"8553224"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.52-SF3:T8415"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603604269490"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.481"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SF3"],[71,"T8415"],[72,"Fine-finishing"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.8"],[174,"11.6"],[181,"2.5"],[183,"0.6"],[207,"4.4"],[228,"9.525"],[235,"4.22"]],"m":[["dimensions",0],["geometry",5]],"d":[],"x":[966214]},"465147":{"c":"DCGT 11T304EL-SI:T8430","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.4 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SI with rounded cutting edges, in grade T8430, a PVD coated fine grained WC-Co carbide within ISO ranges P20 -P40 and M20 -M35, for fine to medium machining of steels and stainless-steels with a left handed turning tool","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.4 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SI avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains fins T8430, revêtu PVD dans les plages ISO P20 -P40 et M20 -M35, pour usinage fin à moyen des aciers et aciers inoxydables avec un outil de tournage à gauche","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.4 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SI mit verrundeter Schneidkante, im Substrat T8430, PVD beschichtet WC-Co Feinkornsubstrat in den ISO-Bereichen P20 -P40 und M20 -M35, zum schlichten bis medium bearbeiten von Stählen und nichtrostenden Stählen mit einem linksschneidendem Werkzeug"],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","possible"]],"f":[[0,"7977207"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.51L-SI:T8430"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603818187"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.526"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SI"],[71,"T8430"],[72,"Medium"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.4"],[174,"11.6"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[966206]},"465156":{"c":"DCGT 11T308EL-SI:T8430","s":["Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525 mm, 3.97 mm thick, 0.8 mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SI with rounded cutting edges, in grade T8430, a PVD coated fine grained WC-Co carbide within ISO ranges P20 -P40 and M20 -M35, for fine to medium machining of steels and stainless-steels with a left handed turning tool","Plaquette de tournage positive non réversible, forme rhombique à 55° avec 7° de dépouille, un diamètre de cercle inscrit de 9.525 mm, 3.97 mm d'épaisseur, rayon de pointe 0.8 mm, précision d'indexage selon la classe de tolérance ISO G, brise-copeaux SI avec arêtes de coupe arrondies, en nuance carbure WC-Co à grains fins T8430, revêtu PVD dans les plages ISO P20 -P40 et M20 -M35, pour usinage fin à moyen des aciers et aciers inoxydables avec un outil de tournage à gauche","Einseitige positive Drehwendeschneidplatte, 55° Rhombisch mit 7° Freiwinkel, Innenkreisdurchmesser von 9.525 mm, 3.97 mm Dick, 0.8 mm Radius, Indexgenauigkeit nach ISO-Toleranzklasse-G, Spanbrecher SI mit verrundeter Schneidkante, im Substrat T8430, PVD beschichtet WC-Co Feinkornsubstrat in den ISO-Bereichen P20 -P40 und M20 -M35, zum schlichten bis medium bearbeiten von Stählen und nichtrostenden Stählen mit einem linksschneidendem Werkzeug"],"o":"CZ","a":[["P","primary"],["M","primary"],["K","possible"],["S","possible"]],"f":[[0,"7977209"],[7,"10"],[14,"DCGT"],[16,"DCGT 32.52L-SI:T8430"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"3603603818200"],[21,"40.0"],[22,"98.0"],[23,"11.0"],[24,"4.501"],[64,"Positive",null,"Plaquettes positives","Positiv"],[65,"D - rhombic 55° included angle",null,"D - rhombique 55° angle inclus","D - rhombischer 55° eingeschlossener Winkel"],[66,"DCGT"],[68,"T"],[69,"C 7°"],[70,"SI"],[71,"T8430"],[72,"Medium"],[73,"11"],[74,"T3"],[84,"DC"],[158,"0.8"],[174,"11.6"],[207,"4.4"],[228,"9.525"],[235,"3.97"]],"m":[["dimensions",0],["geometry",2]],"d":[],"x":[966215]}}}

Ajouter au panier

Ajouter à la liste de souhaits

Conditions générales de vente B2B
Politique de retour B2B

Spécifications

Variante (DP)

11T301E-SF3:T6310, 11T302E-FF2:T8430, 11T302E-FF2:T9325, 11T302E-FF2:T9425, 11T302E-FF2:TT010, 11T302E-SF3:H07, 11T302E-SF3:T6310, 11T302E-SF3:T8415, 11T302F-AL:HF7, 11T302F-AL:T0315, 11T304E-NF1:T6310, 11T304E-NF1:T7325, 11T304E-SF3:H07, 11T304E-SF3:T6310, 11T304E-SF3:T8415, 11T304EL-SI:T8430, 11T304ER-SI:T8430, 11T304F-AL:HF7, 11T304F-AL:T0315, 11T308E-NF1:T6310, 11T308E-NF1:T7325, 11T308E-SF3:H07, 11T308E-SF3:T6310, 11T308E-SF3:T8415, 11T308EL-SI:T8430, 11T308ER-SI:T8430, 11T308F-AL:HF7, 11T308F-AL:T0315, 070201E-SF3:T6310, 070202E-SF3:T6310, 070202E-SF3:T8415, 070202F-AL:HF7, 070202F-AL:T0315, 070204E-SF3:H07, 070204E-SF3:T6310, 070204E-SF3:T8415, 070204F-AL:HF7, 070204F-AL:T0315

Produits alternatifs

Ces autres produits pourraient vous intéresser

DCGT Plaquette de tournage - Positive

Informations produit

Variante (DP)

Conditionnement

Spécifications

Produits alternatifs