C110 Fraise à rainurer P9 en HSS-E-PM à 2 dents, série extra-courte, finition brillante

Name: C110 Fraise à rainurer P9 en HSS-E-PM à 2 dents, série extra-courte, finition brillante (1 mm)
SKU: C1101.0
Price: 26.95 EUR
Availability: InStock

DORMER République tchèque

26,95 €

excl. TVA

Informations produit

Fraise à 2 dents avec une longueur de coupe extra courte assurant une grande rigidité. Convient pour le fraisage de rainures peu profondes et le ramping. La grande précision du diamètre de coupe permet le fraisage de rainures de clavettes standards avec une tolérance P9. Polyvalente, elle peut être utilisée dans les aciers doux, les matériaux non-ferreux et les alliages de titane de résistance moyenne.

Diamètre (DC)
Revêtement (DP)
Queue (DP)
Tolérance (DP)

{"v":1,"a":["https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/C110_DIM.png","https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/C1101_5983749_3D.STP"],"p":{"463122":{"c":"C1101.0","s":["Extra short series slot drill with 2 flutes, diameter 1 mm with 2.5 mm length of cut and 47 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 1 mm with 2.5 mm length of cut and 47 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 1 mm mit 2.5 mm Schnittlänge und 47 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983761"],[7,"1"],[14,"C110"],[16,"C1101.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353165"],[21,"11.0"],[22,"84.0"],[23,"9.0"],[24,"10.8"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"1.0"],[181,"2.5"],[252,"1.0"],[254,"4.0"],[260,"47.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964055]},"463123":{"c":"C1101.5","s":["Extra short series slot drill with 2 flutes, diameter 1.5 mm with 3 mm length of cut and 47 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 1.5 mm with 3 mm length of cut and 47 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 1.5 mm mit 3 mm Schnittlänge und 47 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983771"],[7,"1"],[14,"C110"],[16,"C1101.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353172"],[21,"11.0"],[22,"84.0"],[23,"9.0"],[24,"10.8"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"1.5"],[181,"3.0"],[252,"1.5"],[254,"4.0"],[260,"47.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964056]},"463124":{"c":"C1101/16","s":["Extra short series slot drill with 2 flutes, diameter 1/16 inch with 3 mm length of cut and 47 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 1/16 inch with 3 mm length of cut and 47 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 1/16 inch mit 3 mm Schnittlänge und 47 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983776"],[7,"1"],[14,"C110"],[16,"C1101/16"],[17,"Inch"],[20,"7320760639795"],[21,"11.0"],[22,"84.0"],[23,"9.0"],[24,"10.9"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[162,"1/16"],[164,"1.59"],[181,"3.0"],[252,"1.59"],[254,"4.0"],[260,"47.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964057]},"463125":{"c":"C1101.8","s":["Extra short series slot drill with 2 flutes, diameter 1.8 mm with 4 mm length of cut and 48 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 1.8 mm with 4 mm length of cut and 48 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 1.8 mm mit 4 mm Schnittlänge und 48 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983773"],[7,"1"],[14,"C110"],[16,"C1101.8"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353189"],[21,"11.17"],[22,"83.81"],[23,"9.66"],[24,"12.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"1.8"],[181,"4.0"],[252,"1.8"],[254,"4.0"],[260,"48.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964058]},"463126":{"c":"C1102.0","s":["Extra short series slot drill with 2 flutes, diameter 2 mm with 4 mm length of cut and 48 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 2 mm with 4 mm length of cut and 48 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 2 mm mit 4 mm Schnittlänge und 48 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983863"],[7,"1"],[14,"C110"],[16,"C1102.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353301"],[21,"11.0"],[22,"84.0"],[23,"9.0"],[24,"8.9"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"2.0"],[181,"4.0"],[252,"2.0"],[254,"5.5"],[260,"48.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964059]},"463127":{"c":"C1103/32","s":["Extra short series slot drill with 2 flutes, diameter 3/32 inch with 5 mm length of cut and 49 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 3/32 inch with 5 mm length of cut and 49 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 3/32 inch mit 5 mm Schnittlänge und 49 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983902"],[7,"1"],[14,"C110"],[16,"C1103/32"],[17,"Inch"],[20,"7320760639801"],[21,"11.0"],[22,"84.0"],[23,"9.0"],[24,"10.7"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[162,"3/32"],[164,"2.38"],[181,"5.0"],[252,"2.38"],[254,"7.0"],[260,"49.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964060]},"463128":{"c":"C1102.5","s":["Extra short series slot drill with 2 flutes, diameter 2.5 mm with 5 mm length of cut and 49 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 2.5 mm with 5 mm length of cut and 49 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 2.5 mm mit 5 mm Schnittlänge und 49 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983866"],[7,"1"],[14,"C110"],[16,"C1102.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353318"],[21,"11.0"],[22,"84.0"],[23,"10.0"],[24,"11.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"2.5"],[181,"5.0"],[252,"2.5"],[254,"6.5"],[260,"49.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964061]},"463129":{"c":"C1102.8","s":["Extra short series slot drill with 2 flutes, diameter 2.8 mm with 5 mm length of cut and 49 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 2.8 mm with 5 mm length of cut and 49 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 2.8 mm mit 5 mm Schnittlänge und 49 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983869"],[7,"1"],[14,"C110"],[16,"C1102.8"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353325"],[21,"10.0"],[22,"80.0"],[23,"10.0"],[24,"11.1"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"2.8"],[181,"5.0"],[252,"2.8"],[254,"6.5"],[260,"49.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964062]},"463130":{"c":"C1103.0","s":["Extra short series slot drill with 2 flutes, diameter 3 mm with 5 mm length of cut and 49 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 3 mm with 5 mm length of cut and 49 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 3 mm mit 5 mm Schnittlänge und 49 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5984089"],[7,"1"],[14,"C110"],[16,"C1103.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353370"],[21,"11.0"],[22,"84.0"],[23,"9.0"],[24,"10.9"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"3.0"],[181,"5.0"],[252,"3.0"],[254,"7.0"],[260,"49.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964063]},"463131":{"c":"C1101/8","s":["Extra short series slot drill with 2 flutes, diameter 1/8 inch with 6 mm length of cut and 50 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 1/8 inch with 6 mm length of cut and 50 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 1/8 inch mit 6 mm Schnittlänge und 50 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983788"],[7,"1"],[14,"C110"],[16,"C1101/8"],[17,"Inch"],[20,"7320760639818"],[21,"11.0"],[22,"84.0"],[23,"9.0"],[24,"11.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[162,"1/8"],[164,"3.18"],[181,"6.0"],[252,"3.18"],[254,"7.5"],[260,"50.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964064]},"463132":{"c":"C1103.5","s":["Extra short series slot drill with 2 flutes, diameter 3.5 mm with 6 mm length of cut and 50 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 3.5 mm with 6 mm length of cut and 50 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 3.5 mm mit 6 mm Schnittlänge und 50 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5984094"],[7,"1"],[14,"C110"],[16,"C1103.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353387"],[21,"10.0"],[22,"85.0"],[23,"10.0"],[24,"12.2"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"3.5"],[181,"6.0"],[252,"3.5"],[254,"8.0"],[260,"50.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964065]},"463133":{"c":"C1103.8","s":["Extra short series slot drill with 2 flutes, diameter 3.8 mm with 7 mm length of cut and 51 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 3.8 mm with 7 mm length of cut and 51 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 3.8 mm mit 7 mm Schnittlänge und 51 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5984099"],[7,"1"],[14,"C110"],[16,"C1103.8"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353394"],[21,"11.18"],[22,"83.64"],[23,"9.35"],[24,"12.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"3.8"],[181,"7.0"],[252,"4.0"],[254,"9.0"],[260,"51.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964066]},"463134":{"c":"C1104.0","s":["Extra short series slot drill with 2 flutes, diameter 4 mm with 7 mm length of cut and 51 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 4 mm with 7 mm length of cut and 51 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 4 mm mit 7 mm Schnittlänge und 51 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983914"],[7,"1"],[14,"C110"],[16,"C1104.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353424"],[21,"11.0"],[22,"84.0"],[23,"9.0"],[24,"11.5"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"4.0"],[181,"7.0"],[252,"4.0"],[254,"9.0"],[260,"51.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964067]},"463135":{"c":"C1104.5","s":["Extra short series slot drill with 2 flutes, diameter 4.5 mm with 7 mm length of cut and 51 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 4.5 mm with 7 mm length of cut and 51 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 4.5 mm mit 7 mm Schnittlänge und 51 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983917"],[7,"1"],[14,"C110"],[16,"C1104.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353431"],[21,"11.05"],[22,"83.88"],[23,"9.51"],[24,"11.4"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"4.5"],[181,"7.0"],[252,"4.5"],[254,"9.0"],[260,"51.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964068]},"463136":{"c":"C1103/16","s":["Extra short series slot drill with 2 flutes, diameter 3/16 inch with 8 mm length of cut and 52 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 3/16 inch with 8 mm length of cut and 52 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 3/16 inch mit 8 mm Schnittlänge und 52 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5984103"],[7,"1"],[14,"C110"],[16,"C1103/16"],[17,"Inch"],[20,"7320760639825"],[21,"11.0"],[22,"84.0"],[23,"9.0"],[24,"9.8"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[162,"3/16"],[164,"4.76"],[181,"8.0"],[252,"4.76"],[254,"10.0"],[260,"52.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964069]},"463137":{"c":"C1105.0","s":["Extra short series slot drill with 2 flutes, diameter 5 mm with 8 mm length of cut and 52 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 5 mm with 8 mm length of cut and 52 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 5 mm mit 8 mm Schnittlänge und 52 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983933"],[7,"1"],[14,"C110"],[16,"C1105.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353455"],[21,"12.0"],[22,"84.0"],[23,"10.0"],[24,"11.8"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"5.0"],[181,"8.0"],[252,"4.7"],[254,"10.0"],[260,"52.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964070]},"463138":{"c":"C1105.5","s":["Extra short series slot drill with 2 flutes, diameter 5.5 mm with 8 mm length of cut and 52 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 5.5 mm with 8 mm length of cut and 52 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 5.5 mm mit 8 mm Schnittlänge und 52 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983937"],[7,"1"],[14,"C110"],[16,"C1105.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353462"],[21,"11.06"],[22,"83.88"],[23,"9.6"],[24,"12.3"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"5.5"],[181,"8.0"],[252,"4.7"],[254,"10.0"],[260,"52.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964071]},"463182":{"c":"C1105.75","s":["Extra short series slot drill with 2 flutes, diameter 5.75 mm with 8 mm length of cut and 52 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 5.75 mm with 8 mm length of cut and 52 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 5.75 mm mit 8 mm Schnittlänge und 52 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983941"],[7,"1"],[14,"C110"],[16,"C1105.75"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353479"],[21,"10.99"],[22,"83.64"],[23,"9.81"],[24,"12.3"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"5.75"],[181,"8.0"],[252,"4.7"],[254,"10.0"],[260,"52.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964115]},"463139":{"c":"C1106.0","s":["Extra short series slot drill with 2 flutes, diameter 6 mm with 8 mm length of cut and 52 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 6 mm with 8 mm length of cut and 52 mm overall length, according to DIN 327 D standard with a 6 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 6 mm mit 8 mm Schnittlänge und 52 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 6 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983958"],[7,"1"],[14,"C110"],[16,"C1106.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353486"],[21,"11.0"],[22,"84.0"],[23,"9.3"],[24,"12.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"6.0"],[142,"h6"],[164,"6.0"],[181,"8.0"],[252,"4.7"],[254,"10.0"],[260,"52.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964072]},"463140":{"c":"C1101/4","s":["Extra short series slot drill with 2 flutes, diameter 1/4 inch with 10 mm length of cut and 60 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 1/4 inch with 10 mm length of cut and 60 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 1/4 inch mit 10 mm Schnittlänge und 60 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 10 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983785"],[7,"1"],[14,"C110"],[16,"C1101/4"],[17,"Inch"],[20,"7320760639832"],[21,"16.0"],[22,"89.0"],[23,"14.0"],[24,"32.7"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[162,"1/4"],[164,"6.35"],[181,"10.0"],[252,"6.35"],[254,"10.5"],[260,"60.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964073]},"463141":{"c":"C1106.5","s":["Extra short series slot drill with 2 flutes, diameter 6.5 mm with 10 mm length of cut and 60 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 6.5 mm with 10 mm length of cut and 60 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 6.5 mm mit 10 mm Schnittlänge und 60 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 10 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983962"],[7,"1"],[14,"C110"],[16,"C1106.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353493"],[21,"16.61"],[22,"88.69"],[23,"13.65"],[24,"33.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[164,"6.5"],[181,"10.0"],[252,"6.5"],[254,"11.5"],[260,"60.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964074]},"463142":{"c":"C1107.0","s":["Extra short series slot drill with 2 flutes, diameter 7 mm with 10 mm length of cut and 60 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 7 mm with 10 mm length of cut and 60 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 7 mm mit 10 mm Schnittlänge und 60 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 10 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983976"],[7,"1"],[14,"C110"],[16,"C1107.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353509"],[21,"16.49"],[22,"88.52"],[23,"13.42"],[24,"35.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[164,"7.0"],[181,"10.0"],[252,"7.0"],[254,"11.5"],[260,"60.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964075]},"463143":{"c":"C1107.5","s":["Extra short series slot drill with 2 flutes, diameter 7.5 mm with 10 mm length of cut and 60 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 7.5 mm with 10 mm length of cut and 60 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 7.5 mm mit 10 mm Schnittlänge und 60 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 10 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983981"],[7,"1"],[14,"C110"],[16,"C1107.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353516"],[21,"16.61"],[22,"88.64"],[23,"14.53"],[24,"33.4"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[164,"7.5"],[181,"10.0"],[252,"7.5"],[254,"11.5"],[260,"60.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964076]},"463183":{"c":"C1107.75","s":["Extra short series slot drill with 2 flutes, diameter 7.75 mm with 11 mm length of cut and 61 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 7.75 mm with 11 mm length of cut and 61 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 7.75 mm mit 11 mm Schnittlänge und 61 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 10 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983986"],[7,"1"],[14,"C110"],[16,"C1107.75"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760573495"],[21,"17.0"],[22,"90.0"],[23,"13.0"],[24,"36.6"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[164,"7.75"],[181,"11.0"],[252,"7.75"],[254,"12.0"],[260,"61.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964116]},"463144":{"c":"C1105/16","s":["Extra short series slot drill with 2 flutes, diameter 5/16 inch with 11 mm length of cut and 61 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 5/16 inch with 11 mm length of cut and 61 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 5/16 inch mit 11 mm Schnittlänge und 61 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 10 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983946"],[7,"1"],[14,"C110"],[16,"C1105/16"],[17,"Inch"],[20,"7320760639849"],[21,"16.0"],[22,"89.0"],[23,"14.0"],[24,"34.6"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[162,"5/16"],[164,"7.94"],[181,"11.0"],[252,"7.94"],[254,"11.5"],[260,"61.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964077]},"463145":{"c":"C1108.0","s":["Extra short series slot drill with 2 flutes, diameter 8 mm with 11 mm length of cut and 61 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 8 mm with 11 mm length of cut and 61 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 8 mm mit 11 mm Schnittlänge und 61 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 10 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5984003"],[7,"1"],[14,"C110"],[16,"C1108.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353523"],[21,"16.65"],[22,"88.63"],[23,"13.7"],[24,"33.9"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[164,"8.0"],[181,"11.0"],[252,"8.0"],[254,"11.5"],[260,"61.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964078]},"463146":{"c":"C1108.5","s":["Extra short series slot drill with 2 flutes, diameter 8.5 mm with 11 mm length of cut and 61 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 8.5 mm with 11 mm length of cut and 61 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 8.5 mm mit 11 mm Schnittlänge und 61 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 10 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5984007"],[7,"1"],[14,"C110"],[16,"C1108.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353530"],[21,"15.32"],[22,"88.98"],[23,"13.72"],[24,"37.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[164,"8.5"],[181,"11.0"],[252,"8.5"],[254,"11.5"],[260,"61.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964079]},"463147":{"c":"C1109.0","s":["Extra short series slot drill with 2 flutes, diameter 9 mm with 11 mm length of cut and 61 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 9 mm with 11 mm length of cut and 61 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 9 mm mit 11 mm Schnittlänge und 61 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 10 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5984012"],[7,"1"],[14,"C110"],[16,"C1109.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353547"],[21,"15.9"],[22,"88.55"],[23,"13.83"],[24,"36.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[164,"9.0"],[181,"11.0"],[252,"9.0"],[254,"11.5"],[260,"61.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964080]},"463148":{"c":"C1109.5","s":["Extra short series slot drill with 2 flutes, diameter 9.5 mm with 11 mm length of cut and 61 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 9.5 mm with 11 mm length of cut and 61 mm overall length, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 9.5 mm mit 11 mm Schnittlänge und 61 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 10 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5984017"],[7,"1"],[14,"C110"],[16,"C1109.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353554"],[21,"16.0"],[22,"89.0"],[23,"14.0"],[24,"36.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[164,"9.5"],[181,"11.0"],[252,"9.5"],[254,"11.5"],[260,"61.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964081]},"463149":{"c":"C1103/8","s":["Extra short series slot drill with 2 flutes, diameter 3/8 inch with 13 mm length of cut, 63 mm overall length and 22.5 mm reach with neck relief, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 3/8 inch with 13 mm length of cut, 63 mm overall length and 22.5 mm reach with neck relief, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 3/8 inch mit 13 mm Schnittlänge, 63 mm Gesamtlänge und 22.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 10 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983905"],[7,"1"],[14,"C110"],[16,"C1103/8"],[17,"Inch"],[20,"7320760639856"],[21,"16.0"],[22,"89.0"],[23,"14.0"],[24,"37.9"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[162,"3/8"],[164,"9.52"],[181,"13.0"],[252,"9.5"],[254,"22.5"],[260,"63.0"],[276,"12.0"],[318,"22.5"]],"m":[["dimensions",0]],"d":[],"x":[964082]},"463150":{"c":"C11010.0","s":["Extra short series slot drill with 2 flutes, diameter 10 mm with 13 mm length of cut, 63 mm overall length and 22.5 mm reach with neck relief, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 10 mm with 13 mm length of cut, 63 mm overall length and 22.5 mm reach with neck relief, according to DIN 327 D standard with a 10 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 10 mm mit 13 mm Schnittlänge, 63 mm Gesamtlänge und 22.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 10 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983791"],[7,"1"],[14,"C110"],[16,"C11010.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353196"],[21,"16.0"],[22,"88.0"],[23,"13.0"],[24,"32.5"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"10.0"],[142,"h6"],[164,"10.0"],[181,"13.0"],[252,"9.5"],[254,"22.5"],[260,"63.0"],[276,"12.0"],[318,"22.5"]],"m":[["dimensions",0]],"d":[],"x":[964083]},"463151":{"c":"C11013/32","s":["Extra short series slot drill with 2 flutes, diameter 13/32 inch with 13 mm length of cut and 70 mm overall length, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 13/32 inch with 13 mm length of cut and 70 mm overall length, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 13/32 inch mit 13 mm Schnittlänge und 70 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 12 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983827"],[7,"1"],[14,"C110"],[16,"C11013/32"],[17,"Inch"],[20,"7320760639863"],[21,"17.0"],[22,"88.0"],[23,"17.0"],[24,"56.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[162,"13/32"],[164,"10.32"],[181,"13.0"],[252,"10.32"],[254,"25.0"],[260,"70.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964084]},"463152":{"c":"C11010.5","s":["Extra short series slot drill with 2 flutes, diameter 10.5 mm with 13 mm length of cut and 70 mm overall length, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 10.5 mm with 13 mm length of cut and 70 mm overall length, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 10.5 mm mit 13 mm Schnittlänge und 70 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 12 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983794"],[7,"1"],[14,"C110"],[16,"C11010.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353202"],[21,"17.45"],[22,"86.55"],[23,"17.2"],[24,"57.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[164,"10.5"],[181,"13.0"],[252,"10.5"],[254,"14.0"],[260,"70.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964085]},"463153":{"c":"C11011.0","s":["Extra short series slot drill with 2 flutes, diameter 11 mm with 13 mm length of cut and 70 mm overall length, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 11 mm with 13 mm length of cut and 70 mm overall length, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 11 mm mit 13 mm Schnittlänge und 70 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 12 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983797"],[7,"1"],[14,"C110"],[16,"C11011.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353219"],[21,"17.68"],[22,"87.16"],[23,"17.42"],[24,"50.6"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[164,"11.0"],[181,"13.0"],[252,"11.0"],[254,"13.5"],[260,"70.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964086]},"463154":{"c":"C1107/16","s":["Extra short series slot drill with 2 flutes, diameter 7/16 inch with 13 mm length of cut and 70 mm overall length, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 7/16 inch with 13 mm length of cut and 70 mm overall length, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 7/16 inch mit 13 mm Schnittlänge und 70 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 12 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983991"],[7,"1"],[14,"C110"],[16,"C1107/16"],[17,"Inch"],[20,"7320760639870"],[21,"17.0"],[22,"87.0"],[23,"17.0"],[24,"54.9"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[162,"7/16"],[164,"11.11"],[181,"13.0"],[252,"11.11"],[254,"14.5"],[260,"70.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964087]},"463155":{"c":"C11011.5","s":["Extra short series slot drill with 2 flutes, diameter 11.5 mm with 13 mm length of cut and 70 mm overall length, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 11.5 mm with 13 mm length of cut and 70 mm overall length, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 11.5 mm mit 13 mm Schnittlänge und 70 mm Gesamtlänge, gemäß DIN 327 D Standard mit einem 12 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983800"],[7,"1"],[14,"C110"],[16,"C11011.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760573433"],[21,"17.0"],[22,"87.0"],[23,"17.0"],[24,"56.2"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[164,"11.5"],[181,"13.0"],[252,"11.5"],[254,"13.5"],[260,"70.0"],[276,"12.0"]],"m":[["dimensions",0]],"d":[],"x":[964088]},"463156":{"c":"C11012.0","s":["Extra short series slot drill with 2 flutes, diameter 12 mm with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 12 mm with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 12 mm mit 16 mm Schnittlänge, 73 mm Gesamtlänge und 27.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 12 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983811"],[7,"1"],[14,"C110"],[16,"C11012.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353226"],[21,"17.74"],[22,"85.35"],[23,"17.54"],[24,"57.9"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[164,"12.0"],[181,"16.0"],[252,"11.5"],[254,"27.5"],[260,"73.0"],[276,"12.0"],[318,"27.5"]],"m":[["dimensions",0]],"d":[],"x":[964089]},"463157":{"c":"C11012.5","s":["Extra short series slot drill with 2 flutes, diameter 12.5 mm with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 12.5 mm with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 12.5 mm mit 16 mm Schnittlänge, 73 mm Gesamtlänge und 27.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 12 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983816"],[7,"1"],[14,"C110"],[16,"C11012.5"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760573457"],[21,"17.0"],[22,"87.0"],[23,"18.0"],[24,"59.5"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[164,"12.5"],[181,"16.0"],[252,"11.5"],[254,"27.5"],[260,"73.0"],[276,"12.0"],[318,"27.5"]],"m":[["dimensions",0]],"d":[],"x":[964090]},"463158":{"c":"C1101/2","s":["Extra short series slot drill with 2 flutes, diameter 1/2 inch with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 1/2 inch with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 1/2 inch mit 16 mm Schnittlänge, 73 mm Gesamtlänge und 27.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 12 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983782"],[7,"1"],[14,"C110"],[16,"C1101/2"],[17,"Inch"],[20,"7320760639887"],[21,"17.0"],[22,"87.0"],[23,"17.0"],[24,"62.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[162,"1/2"],[164,"12.7"],[181,"16.0"],[252,"11.5"],[254,"28.0"],[260,"73.0"],[276,"12.0"],[318,"27.5"]],"m":[["dimensions",0]],"d":[],"x":[964091]},"463159":{"c":"C11013.0","s":["Extra short series slot drill with 2 flutes, diameter 13 mm with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 13 mm with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 13 mm mit 16 mm Schnittlänge, 73 mm Gesamtlänge und 27.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 12 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983821"],[7,"1"],[14,"C110"],[16,"C11013.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353233"],[21,"17.0"],[22,"85.0"],[23,"17.0"],[24,"59.4"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[164,"13.0"],[181,"16.0"],[252,"11.5"],[254,"27.5"],[260,"73.0"],[276,"12.0"],[318,"27.5"]],"m":[["dimensions",0]],"d":[],"x":[964092]},"463160":{"c":"C11017/32","s":["Extra short series slot drill with 2 flutes, diameter 17/32 inch with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 17/32 inch with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 17/32 inch mit 16 mm Schnittlänge, 73 mm Gesamtlänge und 27.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 12 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983852"],[7,"1"],[14,"C110"],[16,"C11017/32"],[17,"Inch"],[20,"7320760639894"],[21,"17.0"],[22,"87.0"],[23,"17.0"],[24,"61.1"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[162,"17/32"],[164,"13.49"],[181,"16.0"],[252,"11.5"],[254,"27.5"],[260,"73.0"],[276,"12.0"],[318,"27.5"]],"m":[["dimensions",0]],"d":[],"x":[964093]},"463161":{"c":"C11014.0","s":["Extra short series slot drill with 2 flutes, diameter 14 mm with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 14 mm with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 14 mm mit 16 mm Schnittlänge, 73 mm Gesamtlänge und 27.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 12 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983831"],[7,"1"],[14,"C110"],[16,"C11014.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353240"],[21,"17.62"],[22,"85.1"],[23,"17.37"],[24,"63.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[164,"14.0"],[181,"16.0"],[252,"11.5"],[254,"27.5"],[260,"73.0"],[276,"12.0"],[318,"27.5"]],"m":[["dimensions",0]],"d":[],"x":[964094]},"463162":{"c":"C1109/16","s":["Extra short series slot drill with 2 flutes, diameter 9/16 inch with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 9/16 inch with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 9/16 inch mit 16 mm Schnittlänge, 73 mm Gesamtlänge und 27.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 12 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5984032"],[7,"1"],[14,"C110"],[16,"C1109/16"],[17,"Inch"],[20,"7320760639900"],[21,"21.0"],[22,"85.0"],[23,"21.0"],[24,"64.8"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[162,"9/16"],[164,"14.29"],[181,"16.0"],[252,"11.5"],[254,"27.5"],[260,"73.0"],[276,"12.0"],[318,"27.5"]],"m":[["dimensions",0]],"d":[],"x":[964095]},"463163":{"c":"C11015.0","s":["Extra short series slot drill with 2 flutes, diameter 15 mm with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 15 mm with 16 mm length of cut, 73 mm overall length and 27.5 mm reach with neck relief, according to DIN 327 D standard with a 12 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 15 mm mit 16 mm Schnittlänge, 73 mm Gesamtlänge und 27.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 12 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983834"],[7,"1"],[14,"C110"],[16,"C11015.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353257"],[21,"21.34"],[22,"86.04"],[23,"21.34"],[24,"67.2"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"12.0"],[142,"h6"],[164,"15.0"],[181,"16.0"],[252,"11.5"],[254,"27.5"],[260,"73.0"],[276,"12.0"],[318,"27.5"]],"m":[["dimensions",0]],"d":[],"x":[964096]},"463164":{"c":"C1105/8","s":["Extra short series slot drill with 2 flutes, diameter 5/8 inch with 19 mm length of cut, 79 mm overall length and 30.5 mm reach with neck relief, according to DIN 327 D standard with a 16 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 5/8 inch with 19 mm length of cut, 79 mm overall length and 30.5 mm reach with neck relief, according to DIN 327 D standard with a 16 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 5/8 inch mit 19 mm Schnittlänge, 79 mm Gesamtlänge und 30.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 16 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983949"],[7,"1"],[14,"C110"],[16,"C1105/8"],[17,"Inch"],[20,"7320760639917"],[21,"21.0"],[22,"85.0"],[23,"21.0"],[24,"109.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[162,"5/8"],[164,"15.88"],[181,"19.0"],[252,"15.5"],[254,"30.5"],[260,"79.0"],[276,"12.0"],[318,"30.5"]],"m":[["dimensions",0]],"d":[],"x":[964097]},"463165":{"c":"C11016.0","s":["Extra short series slot drill with 2 flutes, diameter 16 mm with 19 mm length of cut, 79 mm overall length and 30.5 mm reach with neck relief, according to DIN 327 D standard with a 16 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 16 mm with 19 mm length of cut, 79 mm overall length and 30.5 mm reach with neck relief, according to DIN 327 D standard with a 16 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 16 mm mit 19 mm Schnittlänge, 79 mm Gesamtlänge und 30.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 16 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983840"],[7,"1"],[14,"C110"],[16,"C11016.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353264"],[21,"21.0"],[22,"86.0"],[23,"21.0"],[24,"106.7"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[164,"16.0"],[181,"19.0"],[252,"15.5"],[254,"30.5"],[260,"79.0"],[276,"12.0"],[318,"30.5"]],"m":[["dimensions",0]],"d":[],"x":[964098]},"463167":{"c":"C11017.0","s":["Extra short series slot drill with 2 flutes, diameter 17 mm with 19 mm length of cut, 79 mm overall length and 30.5 mm reach with neck relief, according to DIN 327 D standard with a 16 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 17 mm with 19 mm length of cut, 79 mm overall length and 30.5 mm reach with neck relief, according to DIN 327 D standard with a 16 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 17 mm mit 19 mm Schnittlänge, 79 mm Gesamtlänge und 30.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 16 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983843"],[7,"1"],[14,"C110"],[16,"C11017.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353271"],[21,"21.0"],[22,"85.65"],[23,"21.0"],[24,"104.7"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[164,"17.0"],[181,"19.0"],[252,"15.5"],[254,"30.5"],[260,"79.0"],[276,"12.0"],[318,"30.5"]],"m":[["dimensions",0]],"d":[],"x":[964100]},"463180":{"c":"C11011/16","s":["Extra short series slot drill with 2 flutes, diameter 11/16 inch with 19 mm length of cut, 79 mm overall length and 30.5 mm reach with neck relief, according to DIN 327 D standard with a 16 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 11/16 inch with 19 mm length of cut, 79 mm overall length and 30.5 mm reach with neck relief, according to DIN 327 D standard with a 16 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 11/16 inch mit 19 mm Schnittlänge, 79 mm Gesamtlänge und 30.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 16 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983808"],[7,"1"],[14,"C110"],[16,"C11011/16"],[17,"Inch"],[20,"7320760639924"],[21,"22.0"],[22,"85.0"],[23,"22.0"],[24,"112.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[162,"11/16"],[164,"17.46"],[181,"19.0"],[252,"15.5"],[254,"30.5"],[260,"79.0"],[276,"12.0"],[318,"30.5"]],"m":[["dimensions",0]],"d":[],"x":[964113]},"463168":{"c":"C11018.0","s":["Extra short series slot drill with 2 flutes, diameter 18 mm with 19 mm length of cut, 79 mm overall length and 30.5 mm reach with neck relief, according to DIN 327 D standard with a 16 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 18 mm with 19 mm length of cut, 79 mm overall length and 30.5 mm reach with neck relief, according to DIN 327 D standard with a 16 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 18 mm mit 19 mm Schnittlänge, 79 mm Gesamtlänge und 30.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 16 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983855"],[7,"1"],[14,"C110"],[16,"C11018.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353288"],[21,"21.26"],[22,"86.05"],[23,"21.14"],[24,"105.4"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[164,"18.0"],[181,"19.0"],[252,"15.5"],[254,"30.5"],[260,"79.0"],[276,"12.0"],[318,"30.5"]],"m":[["dimensions",0]],"d":[],"x":[964101]},"463166":{"c":"C11019.0","s":["Extra short series slot drill with 2 flutes, diameter 19 mm with 19 mm length of cut, 79 mm overall length and 30.5 mm reach with neck relief, according to DIN 327 D standard with a 16 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 19 mm with 19 mm length of cut, 79 mm overall length and 30.5 mm reach with neck relief, according to DIN 327 D standard with a 16 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 19 mm mit 19 mm Schnittlänge, 79 mm Gesamtlänge und 30.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 16 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983857"],[7,"1"],[14,"C110"],[16,"C11019.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353295"],[21,"24.57"],[22,"87.53"],[23,"24.55"],[24,"122.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"16.0"],[142,"h6"],[164,"19.0"],[181,"19.0"],[252,"15.5"],[254,"30.5"],[260,"79.0"],[276,"12.0"],[318,"30.5"]],"m":[["dimensions",0]],"d":[],"x":[964099]},"463181":{"c":"C1103/4","s":["Extra short series slot drill with 2 flutes, diameter 3/4 inch with 22 mm length of cut, 88 mm overall length and 37.5 mm reach with neck relief, according to DIN 327 D standard with a 20 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 3/4 inch with 22 mm length of cut, 88 mm overall length and 37.5 mm reach with neck relief, according to DIN 327 D standard with a 20 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 3/4 inch mit 22 mm Schnittlänge, 88 mm Gesamtlänge und 37.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 20 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983903"],[7,"1"],[14,"C110"],[16,"C1103/4"],[17,"Inch"],[20,"7320760639931"],[21,"25.0"],[22,"92.0"],[23,"25.0"],[24,"181.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[162,"3/4"],[164,"19.05"],[181,"22.0"],[252,"19.5"],[254,"27.5"],[260,"88.0"],[276,"12.0"],[318,"37.5"]],"m":[["dimensions",0]],"d":[],"x":[964114]},"463169":{"c":"C11020.0","s":["Extra short series slot drill with 2 flutes, diameter 20 mm with 22 mm length of cut, 88 mm overall length and 37.5 mm reach with neck relief, according to DIN 327 D standard with a 20 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 20 mm with 22 mm length of cut, 88 mm overall length and 37.5 mm reach with neck relief, according to DIN 327 D standard with a 20 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 20 mm mit 22 mm Schnittlänge, 88 mm Gesamtlänge und 37.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 20 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983872"],[7,"1"],[14,"C110"],[16,"C11020.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353332"],[21,"24.93"],[22,"94.41"],[23,"24.6"],[24,"186.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[164,"20.0"],[181,"22.0"],[252,"19.5"],[254,"27.5"],[260,"88.0"],[276,"12.0"],[318,"37.5"]],"m":[["dimensions",0]],"d":[],"x":[964102]},"463170":{"c":"C11022.0","s":["Extra short series slot drill with 2 flutes, diameter 22 mm with 22 mm length of cut, 88 mm overall length and 37.5 mm reach with neck relief, according to DIN 327 D standard with a 20 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 22 mm with 22 mm length of cut, 88 mm overall length and 37.5 mm reach with neck relief, according to DIN 327 D standard with a 20 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 22 mm mit 22 mm Schnittlänge, 88 mm Gesamtlänge und 37.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 20 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983881"],[7,"1"],[14,"C110"],[16,"C11022.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353349"],[21,"24.93"],[22,"91.07"],[23,"24.93"],[24,"182.4"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[164,"22.0"],[181,"22.0"],[252,"19.5"],[254,"27.5"],[260,"88.0"],[276,"12.0"],[318,"37.5"]],"m":[["dimensions",0]],"d":[],"x":[964103]},"463184":{"c":"C1107/8","s":["Extra short series slot drill with 2 flutes, diameter 7/8 inch with 22 mm length of cut, 88 mm overall length and 37.5 mm reach with neck relief, according to DIN 327 D standard with a 20 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 7/8 inch with 22 mm length of cut, 88 mm overall length and 37.5 mm reach with neck relief, according to DIN 327 D standard with a 20 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 7/8 inch mit 22 mm Schnittlänge, 88 mm Gesamtlänge und 37.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 20 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983996"],[7,"1"],[14,"C110"],[16,"C1107/8"],[17,"Inch"],[20,"7320760639948"],[21,"25.0"],[22,"92.0"],[23,"25.0"],[24,"192.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"20.0"],[142,"h6"],[162,"7/8"],[164,"22.22"],[181,"22.0"],[252,"19.5"],[254,"37.5"],[260,"88.0"],[276,"12.0"],[318,"37.5"]],"m":[["dimensions",0]],"d":[],"x":[964117]},"463171":{"c":"C11024.0","s":["Extra short series slot drill with 2 flutes, diameter 24 mm with 26 mm length of cut, 102 mm overall length and 45.5 mm reach with neck relief, according to DIN 327 D standard with a 25 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 24 mm with 26 mm length of cut, 102 mm overall length and 45.5 mm reach with neck relief, according to DIN 327 D standard with a 25 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 24 mm mit 26 mm Schnittlänge, 102 mm Gesamtlänge und 45.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 25 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983901"],[7,"1"],[14,"C110"],[16,"C11024.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760573488"],[21,"30.0"],[22,"107.0"],[23,"30.0"],[24,"320.9"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"25.0"],[142,"h6"],[164,"24.0"],[181,"26.0"],[252,"23.5"],[254,"45.5"],[260,"102.0"],[276,"12.0"],[318,"45.5"]],"m":[["dimensions",0]],"d":[],"x":[964104]},"463172":{"c":"C11025.0","s":["Extra short series slot drill with 2 flutes, diameter 25 mm with 26 mm length of cut, 102 mm overall length and 45.5 mm reach with neck relief, according to DIN 327 D standard with a 25 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 25 mm with 26 mm length of cut, 102 mm overall length and 45.5 mm reach with neck relief, according to DIN 327 D standard with a 25 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 25 mm mit 26 mm Schnittlänge, 102 mm Gesamtlänge und 45.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 25 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983967"],[7,"1"],[14,"C110"],[16,"C11025.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353356"],[21,"28.61"],[22,"107.95"],[23,"28.74"],[24,"327.1"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"25.0"],[142,"h6"],[164,"25.0"],[181,"26.0"],[252,"24.5"],[254,"45.5"],[260,"102.0"],[276,"12.0"],[318,"45.5"]],"m":[["dimensions",0]],"d":[],"x":[964105]},"463185":{"c":"C1101","s":["Extra short series slot drill with 2 flutes, diameter 1 inch with 26 mm length of cut 102 mm overall length and 45.5 mm reach with neck relief, according to DIN 327 D standard with a 25 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 1 inch with 26 mm length of cut 102 mm overall length and 45.5 mm reach with neck relief, according to DIN 327 D standard with a 25 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 1 inch mit 26 mm Schnittlänge 102 mm Gesamtlänge und 45.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 25 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983749"],[7,"1"],[14,"C110"],[16,"C1101"],[17,"Inch"],[20,"7320760639955"],[21,"30.0"],[22,"106.0"],[23,"30.0"],[24,"327.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"25.0"],[142,"h6"],[162,"1''"],[164,"25.4"],[181,"26.0"],[252,"24.5"],[254,"43.0"],[260,"102.0"],[276,"12.0"],[318,"45.5"]],"m":[["dimensions",0]],"d":[["3d",1]],"x":[964118]},"463173":{"c":"C11026.0","s":["Extra short series slot drill with 2 flutes, diameter 26 mm with 26 mm length of cut, 102 mm overall length and 45.5 mm reach with neck relief, according to DIN 327 D standard with a 25 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 26 mm with 26 mm length of cut, 102 mm overall length and 45.5 mm reach with neck relief, according to DIN 327 D standard with a 25 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 26 mm mit 26 mm Schnittlänge, 102 mm Gesamtlänge und 45.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 25 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5984022"],[7,"1"],[14,"C110"],[16,"C11026.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760628980"],[21,"29.0"],[22,"106.0"],[23,"29.0"],[24,"330.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"25.0"],[142,"h6"],[164,"26.0"],[181,"26.0"],[252,"24.5"],[254,"45.5"],[260,"102.0"],[276,"12.0"],[318,"45.5"]],"m":[["dimensions",0]],"d":[],"x":[964106]},"463174":{"c":"C11028.0","s":["Extra short series slot drill with 2 flutes, diameter 28 mm with 26 mm length of cut, 102 mm overall length and 45.5 mm reach with neck relief, according to DIN 327 D standard with a 25 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 28 mm with 26 mm length of cut, 102 mm overall length and 45.5 mm reach with neck relief, according to DIN 327 D standard with a 25 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 28 mm mit 26 mm Schnittlänge, 102 mm Gesamtlänge und 45.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 25 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5984079"],[7,"1"],[14,"C110"],[16,"C11028.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353363"],[21,"39.35"],[22,"107.83"],[23,"39.2"],[24,"328.8"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"25.0"],[142,"h6"],[164,"28.0"],[181,"26.0"],[252,"24.5"],[254,"45.5"],[260,"102.0"],[276,"12.0"],[318,"45.5"]],"m":[["dimensions",0]],"d":[],"x":[964107]},"463175":{"c":"C11030.0","s":["Extra short series slot drill with 2 flutes, diameter 30 mm with 26 mm length of cut, 102 mm overall length and 45.5 mm reach with neck relief, according to DIN 327 D standard with a 25 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 30 mm with 26 mm length of cut, 102 mm overall length and 45.5 mm reach with neck relief, according to DIN 327 D standard with a 25 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 30 mm mit 26 mm Schnittlänge, 102 mm Gesamtlänge und 45.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 25 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983906"],[7,"1"],[14,"C110"],[16,"C11030.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353400"],[21,"39.0"],[22,"107.0"],[23,"39.0"],[24,"360.5"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"25.0"],[142,"h6"],[164,"30.0"],[181,"26.0"],[252,"24.5"],[254,"45.5"],[260,"102.0"],[276,"12.0"],[318,"45.5"]],"m":[["dimensions",0]],"d":[],"x":[964108]},"463176":{"c":"C11032.0","s":["Extra short series slot drill with 2 flutes, diameter 32 mm with 32 mm length of cut, 112 mm overall length and 51.5 mm reach with neck relief, according to DIN 327 D standard with a 32 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 32 mm with 32 mm length of cut, 112 mm overall length and 51.5 mm reach with neck relief, according to DIN 327 D standard with a 32 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 32 mm mit 32 mm Schnittlänge, 112 mm Gesamtlänge und 51.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 32 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983908"],[7,"1"],[14,"C110"],[16,"C11032.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760353417"],[21,"39.46"],[22,"128.7"],[23,"39.46"],[24,"552.2"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"32.0"],[142,"h6"],[164,"32.0"],[181,"32.0"],[252,"31.5"],[254,"51.5"],[260,"112.0"],[276,"12.0"],[318,"51.5"]],"m":[["dimensions",0]],"d":[],"x":[964109]},"463177":{"c":"C11035.0","s":["Extra short series slot drill with 2 flutes, diameter 35 mm with 32 mm length of cut, 112 mm overall length and 51.5 mm reach with neck relief, according to DIN 327 D standard with a 32 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 35 mm with 32 mm length of cut, 112 mm overall length and 51.5 mm reach with neck relief, according to DIN 327 D standard with a 32 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 35 mm mit 32 mm Schnittlänge, 112 mm Gesamtlänge und 51.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 32 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983910"],[7,"1"],[14,"C110"],[16,"C11035.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760639986"],[21,"40.0"],[22,"118.0"],[23,"40.0"],[24,"616.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"32.0"],[142,"h6"],[164,"35.0"],[181,"32.0"],[252,"31.5"],[254,"59.5"],[260,"112.0"],[276,"12.0"],[318,"51.5"]],"m":[["dimensions",0]],"d":[],"x":[964110]},"463178":{"c":"C11036.0","s":["Extra short series slot drill with 2 flutes, diameter 36 mm with 32 mm length of cut, 112 mm overall length and 51.5 mm reach with neck relief, according to DIN 327 D standard with a 32 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 36 mm with 32 mm length of cut, 112 mm overall length and 51.5 mm reach with neck relief, according to DIN 327 D standard with a 32 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 36 mm mit 32 mm Schnittlänge, 112 mm Gesamtlänge und 51.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 32 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983912"],[7,"1"],[14,"C110"],[16,"C11036.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760628997"],[21,"50.0"],[22,"130.0"],[23,"50.0"],[24,"645.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"32.0"],[142,"h6"],[164,"36.0"],[181,"32.0"],[252,"31.5"],[254,"59.5"],[260,"112.0"],[276,"12.0"],[318,"51.5"]],"m":[["dimensions",0]],"d":[],"x":[964111]},"463179":{"c":"C11040.0","s":["Extra short series slot drill with 2 flutes, diameter 40 mm with 38 mm length of cut, 130 mm overall length and 59.5 mm reach with neck relief, according to DIN 327 D standard with a 40 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra short series slot drill with 2 flutes, diameter 40 mm with 38 mm length of cut, 130 mm overall length and 59.5 mm reach with neck relief, according to DIN 327 D standard with a 40 mm Weldon shank, powder metallurgical HSS-E with bright finish, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in free machining steel and copper or copper alloys","Extra kurzer nutfräser mit 2 Schneiden, Durchmesser 40 mm mit 38 mm Schnittlänge, 130 mm Gesamtlänge und 59.5 mm erreichbare Lämge mit Halsfreischliff, gemäß DIN 327 D Standard mit einem 40 mm Weldonschaft, HSSE-PM mit unbeschichtet, 30° Helix und 12° Spanwinkel zum Schulterfräsen, Nutfräsen und Rampenfräsen in Baustahl 0 und Kupfer oder Kupferlegierungen"],"o":"CZ","a":[["P","primary"],["M","possible"],["K","possible"],["N","primary"],["S","primary"]],"f":[[0,"5983925"],[7,"1"],[14,"C110"],[16,"C11040.0"],[17,"Metric","Metrisch","Métrique","Metrisch"],[20,"7320760629000"],[21,"50.0"],[22,"136.0"],[23,"50.0"],[24,"1070.0"],[31,"HSS-E-PM"],[32,"DIN 327 D"],[33,"Steam Tempered",null,"Traitement vapeur (oxyde)","Dampfanlassbehandlung"],[34,"Weldon shank DIN 1835B",null,"Queue Weldon DIN 1835 B","DIN 1835B – Weldon-Schaft"],[37,"2.0"],[47,"e8"],[52,"30"],[53,"Yes","Ja",null,null],[55,"N - General Purpose Cutter Type for Low to High Resistance Materials",null,"N - Profil pour usage général dans les matériaux de faible à haute résistance","N - Universalfräser für gering – bis hochwiderstandsfähige Werkstoffe"],[138,"40.0"],[142,"h6"],[164,"40.0"],[181,"38.0"],[252,"39.0"],[254,"70.5"],[260,"130.0"],[276,"12.0"],[318,"59.5"]],"m":[["dimensions",0]],"d":[],"x":[964112]}}}

Ajouter au panier

Ajouter à la liste de souhaits

Conditions générales de vente B2B
Politique de retour B2B

Spécifications

Diamètre (DC)	1 mm, 1,5 mm, 1/16", 1,8 mm, 2 mm, 3/32", 2,5 mm, 2,8 mm, 3 mm, 1/8", 3,5 mm, 3,8 mm, 4 mm, 4,5 mm, 3/16", 5 mm, 5,5 mm, 5,75 mm, 6 mm, 1/4", 6,5 mm, 7 mm, 7,5 mm, 7,75 mm, 5/16", 8 mm, 8,5 mm, 9 mm, 9,5 mm, 3/8", 10 mm, 13/32", 10,5 mm, 11 mm, 7/16", 11,5 mm, 12 mm, 12,5 mm, 1/2", 13 mm, 17/32", 14 mm, 9/16", 15 mm, 5/8", 16 mm, 17 mm, 11/16", 18 mm, 19 mm, 3/4", 20 mm, 22 mm, 7/8", 24 mm, 25 mm, 1'', 26 mm, 28 mm, 30 mm, 32 mm, 35 mm, 36 mm, 40 mm
Revêtement (DP)	Traitement vapeur (oxyde)
Queue (DP)	Queue Weldon DIN 1835 B
Tolérance (DP)	e8

Produits alternatifs

Ces autres produits pourraient vous intéresser

C110 Fraise à rainurer P9 en HSS-E-PM à 2 dents, série extra-courte, finition brillante

Informations produit

Diamètre (DC)

Revêtement (DP)

Queue (DP)

Tolérance (DP)

Spécifications

Produits alternatifs